Personal UV dosimetry addresses a measurement gap: ambient ultraviolet (UV) readings describe radiation at a location, but not necessarily the exposure received by a person moving through different environments and activities. Developed in response to concerns about ozone depletion and potential effects on human health, personal dosimeters made it possible to study solar UV exposure in workplaces, homes, and leisure settings. Polysulphone film became the most widely used personal UV dosimeter, providing a practical way to build a quantitative picture of human exposure.
Why measuring personal UV exposure matters
Radiometers and spectroradiometers can measure ambient solar UV, but their size and cost make them less suitable for monitoring individuals at multiple body locations. A personal dosimeter needs to be easy to wear without interfering with normal activity. Its response should also provide a usable relationship between the recorded change and the UV dose received.
For biological exposure studies, matching the dosimeter’s wavelength sensitivity to the biological effect being considered is important. A common target is erythema, the skin response associated with UV exposure. Other practical considerations include a sufficiently broad measurement range, stable storage, manageable readout, and low cost when many people need to be monitored.
How polysulphone film became a personal UV dosimeter
Polysulphone (PSP) and polyphenylene oxide (PPO) attracted attention when researchers observed that the polymers darkened under UV radiation. Both materials could serve as monitors, but PSP was selected for personal dosimetry because it was more sensitive than PPO and did not respond to wavelengths above about 340 nanometres. PPO, by comparison, showed sensitivity extending to 400 nanometres.
When PSP film is exposed to UV, it degrades and its absorption in the near-ultraviolet region changes. The change in absorbance at 330 nanometres, written as ΔA330, can be measured before and after exposure and used to estimate dose. A standard UV spectrophotometer can read the film, although processing many badges manually can be time-consuming.
PSP’s response is not a perfect match for the erythema action spectrum. This matters because different UV wavelengths do not contribute equally to erythemal effects, while the film has its own wavelength sensitivity. Calibration is therefore essential when the goal is to estimate erythemally effective exposure rather than simply record a change in the material.
Calibration and practical limitations
Calibration relates the change in film absorbance to a known UV dose. For solar applications, researchers can measure spectral irradiance across relevant wavelengths and combine those measurements with the erythema action spectrum to estimate erythemally effective dose. The resulting relationship between ΔA330 and dose can then be used to interpret exposed badges.
Calibration conditions should reflect the conditions in which the dosimeters will be used. The difference between PSP’s spectral response and the erythema action spectrum can introduce errors that vary with solar altitude and ozone amount. Where corrections are not applied, calibration under atmospheric conditions similar to those of the monitored population can help account for this source of variation.
PSP film also has a limited dynamic range because its response can saturate. Depending on people’s outdoor behaviour, badges may need replacing daily or weekly. In addition, the measured absorbance change continues to develop after exposure ends: the immediate reading is lower than readings taken later. This dark reaction can be managed by using a consistent delay between exposure and measurement, matching the timing used during calibration.
What early exposure studies revealed
Early studies showed why personal measurements offer information that ambient readings alone cannot provide. In a London hospital study conducted over two weeks in summer 1975, researchers monitored laboratory workers, gardeners, and geriatric patients. Laboratory workers received about 5% of the ambient weekly UV dose, while gardeners at work received just over 10%. Patients’ exposure varied considerably depending on whether they were able to spend time on a balcony or remained on the ward.
A separate study of office personnel in Bristol found that participants received around 3–4% of ambient UV across monitoring periods spanning the seasons. Across these studies, individual results varied. Time outdoors, posture, badge position, and behaviour all influenced measured exposure. This variability is not simply measurement noise: it reflects differences in how people encounter sunlight.
Small film badges also enabled researchers to examine exposure at different anatomical sites, including around the eyes. Later applications extended beyond everyday sunlight to occupational and artificial UV sources, such as industrial light sources, welding arcs, and phototherapy equipment. Studies also investigated exposure in children and people with photosensitivity.
Other approaches to personal UV dosimetry
PSP was not the only dosimeter explored. Alternatives included photosensitive films, diazo systems, color-changing papers, thermoluminescent materials, CR-39 plastic, and biological systems such as bacteriophage T7. These approaches differed in their response, readout, and practical suitability. Some color-changing papers allowed visual comparison with printed standards but offered only semi-quantitative estimates. CR-39 required chemical etching after exposure, and comparisons found PSP more reliable for UV dosimetry.
Electronic dosimeters introduced another capability: recording changes in UV irradiance over time. Unlike an integrating film badge, which reflects accumulated exposure over a wearing period, an electronic sensor and data logger can sample irradiance at short intervals. This makes it possible to examine how exposure rates change during outdoor activities and under different weather conditions.
Practical implications
Personal UV dosimetry transformed exposure assessment by shifting attention from radiation available in an environment to radiation received by individuals. PSP film’s low cost and straightforward wearability supported studies across occupations, activities, age groups, and body sites, while its limitations made calibration and consistent handling important parts of the measurement process.
For anyone interpreting personal UV measurements, the key considerations are the dosimeter’s spectral response, the calibration conditions, the timing of readout, and the wearer’s behaviour. Together, these factors determine how well a badge’s material response represents biologically relevant exposure. The broader lesson is that a personal exposure measurement is most useful when its method and context are understood alongside the result.