Access Official Technical PDF

Share Summary:LinkedInEmail

Assessing power electronics reliability is challenging because a module brings together semiconductor devices, metals, polymers, and composite materials across scales ranging from micrometers to centimeters. It must also operate amid interacting electrical, thermal, mechanical, and sometimes chemical stresses. A meaningful assessment therefore needs to connect the physical mechanisms that cause damage with the conditions the equipment will actually encounter.

This is especially important for industrial and infrastructure applications, where power modules may be expected to operate for long periods and can be costly to replace. Statistical approaches alone can be difficult to apply when lifetimes are long and the number of devices available for testing is limited. Experimental methods and numerical models can help fill that gap—but only when they reflect the technology and its operating environment.

Why power electronics reliability is difficult to assess

Power module designs are evolving. Conventional layouts place active parts on a power assembly, while embedded designs integrate active parts within the assembly. In either case, reliability depends on the interactions among materials and structures, not simply on the semiconductor chip in isolation.

The operating environment adds another layer of complexity. A module’s mission profile determines the conditions it experiences over time, including electrical loading and temperature changes. High power and current densities, temperature gradients, and rapid changes in current or voltage can combine to create stresses across the device and its packaging.

These conditions matter because the same module may be exposed to several coupled effects at once. A test that captures only one stress may miss how electrical operation, heat generation, mechanical response, and cooling interact. The goal is not merely to record whether a device fails, but to understand how damage develops and what that means for availability, robustness, and service life.

Power module reliability testing should reflect use conditions

Accelerated ageing tests apply stresses to reveal damage mechanisms in less time than ordinary operation would require. Their value depends on whether those stresses are relevant to the intended application. Test conditions that are too far removed from use may produce damage that does not represent field behaviour, or fail to reveal important mechanisms.

Thermal cycling and power cycling

Accelerated Thermal Cycling Tests (ATCT) apply repeated temperature changes, principally to examine thermal and mechanical effects. Accelerated Power Cycling Tests (APCT) create repeated heating and cooling through power dissipation, bringing electrical, thermal, and mechanical stresses into the assessment.

In a conventional DC power cycling test, the module is periodically heated and cooled under low-voltage, direct on-bias conditions without switching. Testers control the dissipation and cooling periods, and periodically measure selected stress or damage indicators. The measurement protocol and the thresholds used to identify damage are important parts of the method: a result is only useful if the indicators and criteria suit the technology being evaluated.

Tests designed for established technologies and applications may not automatically suit newer devices or different mission profiles. As power density and operating conditions change, engineers need to check whether a test still represents the expected use and whether its indicators can detect the relevant damage.

Making tests more representative

A power cycling setup can be made closer to operating conditions by including switching, the module’s drivers, and the contribution of the cooling system. Thermal coupling effects can also matter. This broader setup introduces more parameters and contributors, but it can help reveal realistic damage mechanisms across the system rather than focusing only on the power module.

For each application, test designers need to choose conditions that represent its constraints and define indicators and thresholds accordingly. This makes the test more useful for identifying ageing factors and for informing design decisions, rather than treating accelerated cycling as a generic pass-or-fail exercise.

Use multiphysics modeling to interpret damage

Numerical modeling complements experimental work by examining module behaviour under combined constraints. A useful model must represent the relevant physics and geometry at an appropriate level of detail. Depending on the question, this may require electrothermal or electro-thermomechanical coupling, as well as attention to how power is distributed through the modeled structure.

Modeling choices should match the objectives of the study. A detailed model is not automatically more useful if it does not improve the analysis of the failure mechanism or operating condition in question. The cooling system also needs appropriate representation of its static and transient performance when it affects module temperatures.

Models of ageing and lifetime require particular care. Developing a lifetime law can take substantial experimental work, and results depend on technological choices that influence the damage mechanisms. Experimental campaigns remain important for building models suited to a specific technology and field of use. Simulation can then help extend and interpret those results, while sensitivity analysis can show how test parameters affect the conclusions.

Combine experiments and simulation for stronger assessments

Neither testing nor modeling provides a complete reliability assessment on its own. Experiments provide evidence about observed behaviour and damage; numerical methods help examine coupled stresses and understand how those observations relate to operating conditions. Correlating simulation results with experiments supports model validation and a clearer understanding of the constraints involved.

A combined approach can help engineers and decision-makers:

  • Identify the main damage mechanisms and ageing factors for a technology.
  • Choose test conditions and damage indicators that reflect the intended application.
  • Improve understanding of how design choices affect module behaviour.
  • Develop and evaluate lifetime models based on relevant experimental evidence.
  • Support diagnostic and prognostic methods for assessing module integrity and remaining life.

For newer technologies and demanding mission profiles, assessment methods may need to evolve. This includes revisiting damage indicators and thresholds, examining how stresses accumulate, and validating lifetime relationships against experimental results. More consistent modeling practices and material-property data can also support comparisons and improve the basis for simulation.

Conclusion: align reliability methods with the mission profile

Power module reliability is a system-level question shaped by materials, design, operating conditions, and interacting physical stresses. Accelerated thermal and power cycling can reveal ageing, but their results are most relevant when test conditions and damage criteria reflect actual use. Multiphysics modeling adds context, provided its assumptions and level of detail suit the problem and its results are checked against experiments.

For industrial automation teams, the practical takeaway is to treat reliability assessment as a coordinated process: define the mission profile, target relevant damage mechanisms, select representative tests, and use validated models to interpret evidence and estimate lifetime. This creates a stronger technical basis for design decisions, maintenance planning, and power module selection.

Access Official Technical PDF

About The Author