Access Official Technical PDF

Share Summary:LinkedInEmail

Printed electronics life cycle assessment helps engineers and technical decision-makers evaluate environmental impacts beyond the manufacturing line. Additive processes such as inkjet printing can reduce reliance on some wet chemical steps used in conventional circuit production, but that alone does not establish which technology performs better across its full life cycle. Material inputs, energy use, product lifespan and end-of-life handling all matter.

A comparative study of a paper-based inkjet printed cable for wearable electrocardiogram (ECG) monitoring illustrates how life cycle assessment (LCA) can help structure that evaluation. Its findings also point to a practical lesson for industrial automation and electronics teams: sustainability claims should be tied to a clearly defined product function, system boundary and supporting inventory data.

What life cycle assessment measures

LCA is a systematic method for compiling and examining the material and energy inputs, outputs and associated environmental impacts of a product or service across defined life cycle stages. A typical assessment has four connected phases:

  • Goal and scope: Define the question, product system, comparison and system boundary.
  • Life cycle inventory (LCI): Gather data on materials, energy, emissions, effluents and waste.
  • Impact assessment: Translate inventory results into environmental impact categories.
  • Interpretation: Review the results, assumptions and uncertainties to identify possible improvements.

The selected boundary determines what the results represent. A cradle-to-gate study covers activities from raw material acquisition through the factory gate. A cradle-to-grave study also considers use and end-of-life stages. Comparisons are meaningful only when the systems being assessed and the stages included are made clear.

Printed electronics life cycle assessment: the cable comparison

The example device is a flexible, paper-based cable intended to connect bioelectric sensors to a central medical device for ECG monitoring. It uses five printed metal traces to carry signals and power, including a shielding trace. Conductive ink is deposited onto a paper substrate using inkjet printing, rather than forming the circuit through a conventional wet chemical etching process.

The cable’s electrical feasibility was also examined. Because ECG signals are small, interference between parallel traces was an important design consideration. Tests of shielding approaches found that passive shielding could significantly reduce crosstalk between traces, supporting signal transmission for the intended monitoring application. This illustrates that environmental assessment sits alongside, rather than replaces, functional and electrical validation.

For the environmental comparison, the study evaluated the printed cable against a traditional ECG cable. It reported lower harmful and hazardous environmental impacts for the printed cable in the assessment performed. That result should be understood within the study’s defined scope and data; it is not a universal conclusion that every printed electronic product will outperform a conventional equivalent.

Where the environmental trade-offs arise

Materials and chemical processing

Inkjet printing is an additive process: functional ink is placed where the designed pattern requires it. The study identifies the potential for more efficient raw-material use and less waste, as well as avoiding the acid etching process associated with conventional circuit fabrication. These differences can affect material consumption and emissions, but an LCA needs measured or otherwise suitable data for the actual materials and processes involved.

Energy use in manufacturing

Directly printing conductive patterns can avoid some energy-intensive steps associated with wet chemical processing. However, the printed cable also requires a sintering stage after printing, which adds manufacturing energy demand. A fair comparison therefore accounts for the complete relevant production sequence on both sides—not just the printing or etching step in isolation.

Service life and end of life

The study identifies operating lifespan as a key concern: printed electronics may have a shorter service life than conventional circuit products. If two products provide the same function for different lengths of time, comparing only one unit of each can obscure the practical trade-off. Assessment scope should reflect the function being compared and consider use and replacement where relevant.

Recyclability also requires careful treatment. Printed products may use a narrower range of materials, which could offer an advantage, but identifying and separating substances in electronic waste can be challenging. End-of-life assumptions should be explicit rather than treated as a guaranteed benefit.

Making LCA useful for design decisions

For engineers, integrators and operations leaders, an LCA is most useful when it informs design choices early, while materials and process routes can still be changed. A practical assessment should:

  • State the product function and comparison clearly, including the service delivered.
  • Set system boundaries that capture the manufacturing steps relevant to each alternative.
  • Track material and energy inputs, emissions and waste through a transparent inventory.
  • Document data sources, assumptions and uncertainty, especially where printed-electronics data are limited.
  • Review impact categories and lifespan assumptions before interpreting comparative results.

These checks matter because LCA results depend on data quality, scenarios and practitioner decisions. Missing or inconsistent inventory information can limit confidence, while a boundary that excludes important processes can produce an incomplete picture.

Conclusion: compare the whole system

Printed electronics can offer environmental advantages through additive material deposition and reduced reliance on certain chemical manufacturing steps. The paper-based ECG cable comparison suggests that those advantages can be significant for the system studied, while also highlighting energy for sintering, product lifespan, recycling and data quality as important considerations.

For industrial and product teams, the practical implication is straightforward: evaluate printed and conventional technologies against the same function and appropriate life cycle boundary. Combining LCA with electrical and manufacturing validation gives decision-makers a more grounded basis for selecting materials, refining processes and designing electronics with sustainability in view.

Access Official Technical PDF

About The Author