Access Official Technical PDF

Share Summary:LinkedInEmail

Printed electronics could help make smart labels thin enough to integrate into products where conventional circuit boards, displays and batteries are difficult to accommodate. A demonstrator developed for a metered-dose inhaler (MDI) explored that potential by combining a printed organic logic circuit, a flexible battery and an electrochromic display. The work offers a practical view of what engineers must consider when assembling low-complexity electronics from components with different materials, power requirements and manufacturing approaches.

Why put a dose counter on the inhaler canister?

An MDI delivers medicine through inhalation, but a patient may not be able to tell reliably how much medicine remains. Shaking the device, weighing it or keeping usage notes can provide uncertain indications. A further complication is that an inhaler may continue to spray after its labelled number of actuations while delivering less medicine per spray.

A dose counter can make remaining use more visible. A smart label attached to the canister offers a particular integration approach: the counting mechanism stays with that canister, and the label’s thin form could limit the increase in device size. It could also allow a dose-counting version to be adopted by replacing the canister rather than redesigning the entire inhaler. These design goals matter in medical devices, where usability, form factor and the cost of the counting mechanism all influence product decisions.

Printed electronics as a fit for simple logic

Printed electronics uses printable materials and processes to create electronic components such as conductors, transistors, batteries and displays. Compared with conventional silicon electronics, printed logic is less mature and does not offer comparable performance. Its potential is instead in applications with modest requirements. Counting events is one example: the circuit needs to track actuations, not run a general-purpose computing workload.

Organic field-effect transistors (OFETs) can be fabricated on flexible substrates and are a route to printed logic. Complementary logic requires both n-type and p-type semiconductors. Research described in the demonstrator project focused on fully printed complementary circuits, including a four-bit counter built from connected D flip-flops. Improved dielectric deposition and flexible encapsulation were among the considerations for advancing the circuit and its operating characteristics.

The manufacturing opportunity is broader than replacing a silicon chip. Printable processes may also support application-specific shapes for displays and power sources, potentially bringing electronic and visual design together. Roll-to-roll printing is one route associated with continuous, scalable production, while sheet-to-sheet processes are suited to prototyping and laboratory work. However, the demonstrator was an integration and testing effort, not evidence that every component was already ready for high-volume production.

Integrating the power source, display and counter

Flexible battery and power management

Thin, flexible batteries can help address the space constraints of a label, but battery form factor alone does not settle the power design. The circuit, display and battery must work together within the available voltage and current limits. In the project, a printed battery from Imprint Energy was included in the flexible demonstrator. A separate rigid, non-form-factor (NFF) board was used to test the printed circuit and supporting electronics, including operation at lower supply voltage.

The NFF board also allowed the team to examine power behavior and circuit operation before moving to a flexible layout. Some printed counters operated correctly with a 3 V supply. That is a useful integration result, but it should not be read as a general specification for printed counters or as proof of a finished inhaler product.

Electrochromic display for a low-complexity indication

An electrochromic display (ECD) changes color through a reversible electrochemical process. In a typical device, an electrochromic layer and an ion-storage counter electrode are separated by an electrolyte. Applying a voltage moves ions and changes the optical state of the active material. This provides a way to create a visible indication without relying on a conventional, high-performance display.

The demonstrator used an ECD supplied by RISE Acreo. The display was integrated with the counter and flexible battery on a flexible printed circuit. Bringing these elements together required attention to their electrical connections and physical arrangement, as well as the display’s behavior when driven by the circuit.

Why the rigid test board mattered

Developing a flexible assembly directly can make it harder to isolate problems: circuit behavior, power delivery and component integration are all changing at once. The NFF board provided a test platform for the printed counters, display-driving electronics and other functions. It also incorporated near-field communication (NFC), demonstrating how printed components could be evaluated alongside an off-the-shelf connectivity device. NFC was part of the test board concept; it should not be confused with a fully printed communication system.

This staged approach is relevant to system integrators working with emerging materials. A rigid platform can support debugging and characterization, while a later flexible board tests whether the selected components and connections can be assembled into the intended form factor. The project reported that both the NFF and flexible boards worked as expected, with some printed counters showing correct operation at 3 V.

Practical implications for automation and product teams

The inhaler-label demonstrator highlights several considerations for teams assessing printed electronics in compact products:

  • Match circuit complexity to the application. Printed logic is most compelling when the task is simple enough for its current performance and maturity.
  • Design around the complete power budget. Battery output, circuit supply needs and display operation must be considered together.
  • Separate component testing from form-factor testing. A non-form-factor board can help characterize behavior before flexible integration.
  • Plan for material and process constraints. Flexible substrates and printed layers may impose different integration requirements from standard rigid PCB assemblies.

For industrial automation engineers and technical decision-makers, the broader lesson is that printed electronics is not simply a lower-cost substitute for conventional electronics. It is a different design approach, with value in thin, shape-adapted systems and limitations that must be addressed through application-specific testing.

Conclusion

The smart-label demonstrator brought a printed four-bit counter, flexible battery and electrochromic display into a flexible assembly, supported by a rigid test board for characterization and NFC evaluation. Its results show the feasibility of integrating these technologies in a low-complexity application, while also underscoring the need to validate circuit operation, power delivery and physical integration as a system. For teams exploring printed electronics, a staged development process and a tightly defined application are practical starting points.

Access Official Technical PDF

About The Author