Access Official Technical PDF

Share Summary:LinkedInEmail

RF silicon photonics applies optical components and processing to radio-frequency signal tasks, combining electrical-to-optical conversion, optical transmission, signal processing and optical-to-electrical conversion. For industrial automation engineers and system integrators, the approach is relevant wherever compact photonic circuits could support wideband sensing, communications or signal distribution. Sandia National Laboratories’ research foundry work illustrates how a silicon photonics process and a portfolio of device types can be developed together for application-specific systems.

Why RF silicon photonics matters

RF photonics is suited to applications that need to handle radio-frequency signals through optical techniques. The work described by Sandia addresses areas including radar, antenna remoting, communications, imaging and electronic warfare. The broader engineering challenge is not simply to fabricate a photonic component: a usable system needs a source, an electrical-to-optical interface, an optical path, a means of processing the signal and a detector to convert it back to an electrical signal.

Bringing these functions onto a photonic integrated circuit can support compact system designs. However, the usefulness of integration depends on more than the waveguides themselves. Modulators must encode electrical signals onto light, filters must shape or separate optical signals, and photodetectors must recover those signals. Control and packaging also matter when devices need stable operation as part of a larger system.

A research foundry built around process control

Sandia’s silicon photonics platform was fabricated at its MESA facility on 150 mm wafers. The process included two waveguide levels, typically one or two aluminum metal levels, tungsten contacts, titanium silicides and vertical pn junctions. It used 250 nm device silicon, a 3000 nm buried oxide layer, multiple implant steps, and selective-area germanium growth for photodiodes and avalanche photodetectors. Lithography and etch processes were optimized for low-loss waveguides.

Manufacturing discipline is central to making such a platform useful to collaborators. The process drew on practices associated with CMOS electronics manufacturing, including automated critical-dimension measurement and electrical parametric testing, as well as semi-automated wafer-scale optoelectronic testing. Process design guidelines help teams design devices for the available fabrication steps and evaluate how design choices translate into fabricated structures.

Sandia also supported multi-project wafer runs involving universities, industry and other laboratories. The foundry model described in the work emphasizes collaboration on specialized processes and solutions rather than competing with commercial foundries. A process design kit and compact device models were part of efforts to support design and simulation workflows.

Materials integration expands the design options

Silicon is only one part of the material story. Integrating other materials can address specific optical functions that are difficult to achieve with silicon alone. For example, lithium niobate has a second-order optical nonlinearity that can support functions including second-harmonic generation and electro-optic modulation. The reported work demonstrated integration of thin-film lithium niobate with a silicon waveguide process.

Cladding materials can also influence device behavior. Ring resonators are sensitive to temperature because changes in refractive index shift their resonant wavelength. One approach described in the research used a cladding with a negative thermo-optic coefficient to counteract temperature-related changes in the silicon core. Sol-gel cladding materials were used in a demonstrated athermal silicon ring resonator.

Silicon nitride offers another set of process choices. Low-pressure chemical vapor deposition can provide films used for nonlinear optical functions and low-loss waveguides, while plasma-enhanced chemical vapor deposition operates at lower temperatures and can support multiple waveguide levels. The properties of deposited films depend on process parameters, so optimizing precursor flows and other conditions is important when targeting optical loss, refractive index and stress requirements.

Device building blocks for photonic systems

Modulation and phase control

Resonant microdisk modulators are compact devices suited to optical signaling and wavelength-division multiplexing. Their resonant response also makes wavelength stabilization important: temperature or other changes can move the resonance away from its intended operating point. The reported work explored heater-based tuning and feedback approaches, including control based on local bit-error-rate measurements.

Mach-Zehnder modulators provide another route for electrical-to-optical conversion. The platform work included vertical pn junction designs, travelling-wave electrodes and approaches intended to balance efficiency, speed and insertion loss. Thermo-optic phase shifters provide a way to tune phase in interferometric circuits, with device geometry and thermal isolation affecting power use and switching behavior.

Filtering and detection

Ring resonators can form compact, narrowband optical filters, while arrayed waveguide gratings (AWGs) can separate signals into wavelength channels. The work highlighted AWGs for RF spectral sensing because they are non-resonant and can handle higher optical power than the resonant ring example described. Accurate phase control is important to AWG performance, particularly when designing channelized systems.

At the receiver, germanium photodiodes convert optical signals back into electrical ones. Different detector structures address different requirements: low-capacitance devices can support digital receivers, distributed absorption designs can support higher optical power handling, and silicon avalanche regions can provide a gain mechanism for avalanche photodiodes.

From individual devices to system integration

These building blocks demonstrate why RF silicon photonics is a systems engineering challenge. A practical design must account for optical loss, electrical interfaces, tuning and feedback, detector characteristics and integration with driver or receiver electronics. Sandia’s reported work included flip-chip integration of CMOS electronics with silicon photonics, as well as investigations of resonator control and optical timing circuits. Such examples connect component design to the requirements of a complete photonic link or sensing architecture.

For technical teams assessing an RF photonic approach, the key questions include which functions need to be integrated, what material and process options support them, and how the resulting devices will be controlled and tested. A research-foundry platform can help explore specialized combinations, while design guidelines and calibrated models can make collaboration and circuit development more systematic.

Conclusion

RF silicon photonics combines optical transmission and processing with electronic interfaces to address demanding signal applications. The Sandia work shows the importance of pairing a controlled fabrication process with a broad set of components: modulators, phase shifters, filters, waveguides and photodetectors. For automation and systems teams, the practical implication is to evaluate the complete signal chain—not just an individual photonic device—and consider process compatibility, stabilization, integration and testing from the start.

Access Official Technical PDF

About The Author