Access Official Technical PDF

Share Summary:LinkedInEmail

Scanning probe microscopy (SPM) brings nanoscale surface analysis into reach by using a sharp probe to measure interactions with a material as it scans. Its value extends beyond research: with suitable instrumentation, structured exercises and close supervision, SPM can also help students and technical teams connect instrument operation with the physical principles behind nanoscale measurement and patterning.

A 2007 undergraduate laboratory program at the University of Washington demonstrated this educational approach through a week-long workshop. Small groups worked with scanning force microscopy (SFM), also known as atomic force microscopy (AFM), and explored applications ranging from nanolithography to polymer mechanics and surface forces. The program offers a useful framework for understanding what hands-on SPM training involves and how imaging and manipulation can be taught together.

Scanning probe microscopy as an educational tool

SPM is based on a straightforward idea: move a sharp probe across a surface and record a signal that reveals information about the material. The signal depends on the technique. A scanning tunneling microscope measures tunneling current and is used with conductive surfaces. SFM instead measures forces between a probe and a sample, enabling examination of both conductive and nonconductive materials.

This combination of a clear operating principle and varied applications makes SPM well suited to practical instruction. Students can work directly with a measurement system, then relate the instrument’s response to surface features, material behavior and probe-sample interactions. The workshop’s curriculum reflected this breadth, including contact mechanics, electrostatic force microscopy, force spectroscopy, polymer relaxation and scanning tunneling microscopy.

The program brought together university researchers, community-college educators and instrumentation partners to develop a replicable model for a sustainable undergraduate SPM laboratory. Its design emphasized small groups per instrument, pre-lab preparation, guided experimental work and written analysis—not simply instrument demonstrations.

How contact mode AFM creates a surface image

In contact mode AFM, a sharp tip mounted on a flexible cantilever remains in contact with the sample while the probe scans across it. When the tip encounters a change in surface height, the cantilever deflects. A laser reflected from the cantilever onto a photodiode can detect this movement.

For topographic imaging, a feedback loop adjusts the probe’s vertical position to maintain a set cantilever deflection as the tip moves across the sample. The instrument records the vertical adjustments across the scan area to construct a map of surface topography. This is different from simply recording cantilever deflection while scanning: feedback-controlled height adjustment helps maintain a more consistent tip-sample force.

Understanding that distinction is important for interpreting measurements. The image is not a direct photograph of the surface. It is produced from the instrument’s response as the probe tracks the sample. Tip geometry, cantilever behavior, scan settings and feedback adjustment all contribute to how the resulting data should be understood.

Dip-pen nanolithography connects writing and imaging

One workshop exercise used the AFM probe in two roles: first as a writing tool, then as an imaging probe. In dip-pen nanolithography (DPN), a chemical “ink” is delivered from the tip to a surface, much like material transferred by a very small pen. The exercise used 16-mercaptohexadecanoic acid patterns on a gold film.

Those molecular patterns acted as etch resists. After the patterned substrate was exposed to an etchant, unpatterned gold was removed more readily than the protected regions, leaving nanoscale structures. Students then used contact mode AFM to examine the resulting features.

The assignment linked several stages of experimental reasoning:

  • Prepare the probe and write patterns with selected dwell times.
  • Use the patterns as a mask during wet chemical etching.
  • Image the resulting structures and obtain topographic data.
  • Analyze cross-sections to estimate feature dimensions and compare dot size with dwell time.

This sequence helps learners see how process conditions and surface chemistry relate to measured geometry. It also reinforces the need to distinguish between creating a feature and validating it through measurement.

Building capability through structured lab work

The workshop format paired background reading and theoretical questions with experimental assignments and reports. Participants worked in small teams, prepared for each lab unit in advance and discussed results at the end of the day. This structure made instrument time part of a broader learning process that included preparation, safe operation, data analysis and communication.

For organizations planning SPM training, the instructional model highlights several practical considerations:

  • Match exercises to learning goals. A lab can focus on instrument fundamentals while also showing how SPM applies to materials and surface processes.
  • Allocate time for analysis. Imaging is only one part of the work; cross-sections, feature measurements and interpretation help turn scans into useful results.
  • Build safety into the workflow. Chemical handling, waste disposal and instrument precautions need explicit attention before experimental work begins.
  • Keep groups small enough for hands-on participation. The workshop organized 16 students in groups of four per instrument.

Such considerations apply beyond undergraduate teaching. In industrial settings, technical training also benefits when operators and engineers learn not only the steps for running an instrument, but how measurement signals are generated and what can affect their interpretation.

Practical implications for SPM users

Scanning probe microscopy is both a measurement approach and, in some applications, a means of manipulating material at the nanoscale. Combining AFM imaging with DPN in one learning sequence makes that dual role tangible: the probe can pattern a surface, and the same general class of instrument can then help characterize the result.

The workshop’s broader lesson is that effective SPM capability depends on more than access to an instrument. A strong program connects operating principles, experimental design, safe practices and data analysis. For engineers, educators and technical decision-makers, this offers a practical basis for developing training that supports informed use of nanoscale instrumentation rather than treating it as a black box.

Access Official Technical PDF

About The Author