Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor gas sensors, also known as metal oxide (MOX) sensors, offer a compact way to detect a broad range of gases for environmental, industrial, and building monitoring. Their small size and potential for low-power operation make them relevant to applications ranging from safety systems and food production to air conditioning, medicine, and connected manufacturing. For automation engineers and system integrators, understanding how MOX sensing works—and what influences its performance—is essential when assessing it for a monitoring task.

How semiconductor gas sensors detect gases

A MOX sensor measures the electrical conductivity of a gas-sensitive metal oxide layer. When the target gas contacts the active layer, its electrical resistance changes. The resulting signal can be used to indicate the presence or concentration of a gas, with sensor response depending on the gas and the sensing material.

MOX materials can respond to many reducing and oxidizing gases. Relevant targets include carbon monoxide (CO), nitrogen oxides (NOx), ammonia (NH3), sulfur-containing gases such as hydrogen sulfide (H2S) and sulfur dioxide (SO2), and hydrocarbons. They can also be used to analyze complex aromas, including volatile organic compounds (VOCs). This broad responsiveness is useful where a monitoring system must address more than one gas type, but it also makes material selection and sensor configuration important for achieving the required selectivity.

A suitable chemical coating can improve selectivity. Operating temperature is another key factor: depending on the sensing material and target gas, temperatures from 300 °C to 900 °C may be needed to provide the sensor’s intrinsic conductivity. Sensitivity and detection limits vary by gas and gas-sensitive material; the detectable range described for MOX sensors extends from a few parts per billion to percentage concentrations.

Low-power design with micro-hotplates

Power demand depends strongly on sensor construction because the active layer must be heated. A sensor built on a silicon bulk substrate can require around 1 watt at 400 °C. By contrast, micromechanical structures called micro-hotplates thermally isolate the sensing element from its housing, reducing heat loss and power consumption.

In one optimized design approach, gas-sensitive areas measuring 45 × 45 µm² are arranged within a sensor array with an overall area of 1.6 × 1.6 mm². At an operating temperature of 400 °C, this construction can use less than 15 milliwatts, making battery operation possible in principle. The exact power requirement depends on the design: the described sensor configurations range from up to 1,300 milliwatts for a sensor on a silicon bulk substrate to less than 100 milliwatts for a sensor on a silicon hotplate or membrane. These figures reflect different constructions and should not be treated as interchangeable specifications.

Micro-hotplates can also support rapid temperature cycling. The heating times for the described construction are in the range of a few milliseconds. Separately heating sensor elements in an array can provide another way to vary their response and support gas selectivity. The array can combine multiple metal oxide materials, allowing a broader range of relevant gases to be detected.

Materials and manufacturing choices

Gas-sensitive metal oxide layers may be deposited on non-conducting substrates such as ceramic or silicon, as well as on customer-specific materials. Thick-film and thin-film techniques are among the available approaches. Coating methods include sputtering, evaporation, and printing gas-sensitive inks.

For low-power sensor production, printable metal oxide inks can be deposited without a photolithographic process. The resulting porous layers provide a favorable surface-to-volume ratio, which can contribute to higher sensitivity. Materials used in MOX sensors include tin oxide with platinum or palladium additions, lanthanum-indium oxide, tungsten oxide, and chromium-titanium oxide. The choice of material and sensor layout must be matched to the intended gases and application requirements.

Manufacturing considerations matter alongside sensing performance. Tailoring the material, substrate, and sensor geometry can help align a design with a specific use case, while production concepts need to account for the intended manufacturing process and volume.

Characterizing sensors for an application

Before integrating a sensor into a control or monitoring system, its response needs to be characterized against the gases and conditions relevant to the application. A gas measurement setup can assess sensor signals while regulating variables such as temperature, gas flow, and humidity. The described test arrangement can apply up to eight test gases simultaneously and record the resulting signal paths. Nitrogen, oxygen, or different test gases can be used during testing.

Gas-specific characterization and benchmarking help establish how a sensor behaves under defined test conditions. For an engineering team, this information is useful when comparing candidate materials or configurations and deciding whether a sensor is appropriate for a particular monitoring objective. It does not remove the need to assess the sensor in the context of the complete system and its operating conditions.

Practical implications for automation teams

MOX sensors combine small sensing elements with a broad range of potential gas responses. Their suitability for a project depends on more than footprint: engineers should consider target gases, selectivity, operating temperature, power budget, substrate and heater construction, and the characterization needed to verify sensor behavior.

Micro-hotplate designs can significantly reduce power use compared with bulk-substrate constructions, while material and geometry choices enable application-specific configurations. For plant managers, operations leaders, and system integrators evaluating gas monitoring, the practical next step is to define the gases and operating conditions of interest, then compare sensor materials and designs through gas-specific characterization. That approach helps connect the advantages of compact MOX technology with the actual requirements of an industrial monitoring system.

Access Official Technical PDF

About The Author