Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor reliability testing is under pressure to keep pace with increasingly complex integrated circuits and demanding applications. A test strategy that relies only on conventional screening can leave manufacturers with limited insight into why failures occur, while adding time and cost to development and production. A design-level approach links test engineering with device design, using embedded functions and coordinated data to help identify weaknesses earlier and guide corrective action.

Why semiconductor reliability testing needs to evolve

Defects can be introduced at different stages of semiconductor manufacturing, and failures may appear immediately or after a device has operated for an extended period. Testing therefore serves more than a pass-or-fail function: it helps manufacturers screen devices, assess reliability under stress and understand variation that can point to process or design issues.

Traditional test methods can become harder to apply as device complexity increases. Manufacturers must balance coverage and reliability requirements with test time, cost and time to market. When qualification, burn-in and production data are handled in separate workflows, useful evidence about failure mechanisms can also be harder to connect.

These challenges matter particularly for safety-critical electronics, where reliability is central to applications such as automotive systems and aerospace and defence equipment. The practical objective is not simply to collect more test data, but to obtain dependable information that teams can use to improve the device and its manufacturing process.

Design-level testing connects engineering and production

A design-level test strategy brings reliability considerations into the development phase rather than treating them as a final inspection task. Early co-engineering between a test provider and a semiconductor manufacturer can align test methods with the device’s architecture and intended use. This creates an opportunity to consider test coverage, stress conditions and data needs while design decisions are still being made.

Design for testability (DFT) and built-in self-test (BiST) are important elements of this approach. DFT adds features that make a device easier to test, while BiST uses functions within the device to support testing. By shifting some test activity closer to the device itself, manufacturers can simplify communication with the device under test (DUT) and support more consistent data capture.

Embedded functions need not be extensive to contribute useful information. Device identification can support traceability, while temperature sensing can help teams interpret test conditions. More complex devices may offer greater scope to study key parameters and tailor test coverage or stress levels.

Link qualification, burn-in and failure analysis

Burn-in testing screens devices under accelerated stress conditions, commonly involving elevated temperature and voltage, to identify early failures. It complements other test stages rather than replacing them. Data from qualification testing and burn-in is most useful when it can be considered together, allowing engineering and production teams to trace observed behaviour across phases.

A coordinated reliability test flow can support several connected activities:

  • Capture relevant parameters: Record device behaviour under defined test and stress conditions.
  • Investigate failures: Use reliable data to examine differences between lots, temperature conditions and stress levels.
  • Inform corrective action: Connect findings with design, quality and production teams so possible causes can be assessed.
  • Refine test execution: Use what is learned to adjust coverage and improve the efficiency of subsequent testing.

Ease of use and test duration also influence how effectively teams can investigate failures. If data is accessible and dependable, and testing can be completed in a practical timeframe, engineers have a stronger basis for examining variations and deciding where further analysis is warranted. The value comes from the quality and usability of information, not simply its volume.

Automated test equipment and flexible platforms

Automated test equipment (ATE) applies electrical signals to a DUT and compares its responses with expected results. Semiconductor ATE can support different device types and test stages, while burn-in systems apply stress to screen for reliability issues. The choice and configuration of equipment depend on the device, test requirements and production context.

A modular, broadly applicable test platform can help accommodate different device families and changing requirements. In the approach described by ELES, a universal platform is used for qualification testing and burn-in, with the intention of supporting activity from design validation through production. Modular hardware and device-specific test libraries can help adapt the system to different DUTs and stress needs.

Platform flexibility does not remove the need for appropriate test engineering. Teams still need to define meaningful coverage, set suitable stress conditions and ensure data can be interpreted consistently. The aim is to make test methods adaptable while keeping the connection between design intent, reliability screening and production evidence intact.

Putting a reliability strategy into practice

For engineering and operations teams, a design-level approach is most useful when it is treated as a cross-functional process. Device designers, test engineers, quality teams and production staff need to agree on what information matters and how results will inform decisions. That coordination helps prevent qualification and production testing from becoming isolated activities.

When assessing a semiconductor test strategy, decision-makers can consider whether it:

  • addresses reliability requirements early in the design process;
  • uses DFT or embedded functions where appropriate to improve test access;
  • connects qualification, burn-in and production data for failure investigation;
  • supports the device types and stress conditions required; and
  • produces reliable, usable information for corrective action.

Semiconductor reliability testing cannot eliminate every source of risk, and the semiconductor equipment market remains exposed to changing demand and order timing. Nevertheless, integrating design, test and production knowledge gives teams a clearer basis for improving reliability and understanding failures. The practical implication is straightforward: treat testing as an engineering feedback loop, not just a final screening step, and use connected, trustworthy data to guide improvements toward zero-defect goals.

Access Official Technical PDF

About The Author