Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor technology scaling has become a system-level engineering challenge, not just a matter of making transistors smaller. The International Technology Roadmap for Semiconductors (ITRS) 2015 More Moore chapter describes the growing interaction between device performance, power, area, cost, memory, interconnects, and manufacturing. For industrial automation, these factors matter because computing, sensing, and control systems depend on semiconductor devices that balance processing capability with energy use, reliability, and integration demands.

The roadmap frames scaling around applications including high-performance computing, mobile devices, and connected sensing. Each creates a different combination of requirements: more throughput under thermal limits, more functionality within a battery budget, or lower leakage and variability for autonomous sensing. Meeting these needs requires coordinated changes across the semiconductor process flow and the devices it produces.

Why semiconductor technology scaling is more than transistor shrink

Historically, dimensional scaling helped improve speed, density, and power together. The roadmap notes that this relationship has become harder to sustain. Interconnect bandwidth, power availability, thermal constraints, and the cost and complexity of integration increasingly influence what a chip can deliver. More transistors on a die do not automatically translate into a proportional increase in usable system performance when the power budget remains constrained.

The ITRS describes node-to-node goals through PPAC: performance, power, area, and cost. These objectives can conflict. Reducing supply voltage can lower energy use, but voltage scaling is limited by transistor behavior and circuit margins. Increasing device density can raise the demands on wiring and thermal management. A practical scaling strategy therefore has to consider the whole chip and its manufacturing requirements, rather than optimizing transistor dimensions in isolation.

Advanced CMOS devices bring new process challenges

As planar MOSFET scaling becomes more difficult, the roadmap considers fully depleted silicon-on-insulator (FDSOI) and multi-gate devices, including FinFETs and potential gate-all-around nanowire structures. These architectures offer ways to maintain control of transistor behavior as dimensions shrink. But their three-dimensional geometries introduce difficult requirements for fabrication, measurement, and integration.

One central issue is threshold-voltage control. In lightly doped channels, manufacturers cannot rely on channel doping to set threshold voltage in the same way. Gate materials and high-κ dielectric stacks must provide the required electrical behavior, while their interfaces must limit defects that can degrade mobility and reliability. Device body thickness and its variation also become critical, particularly in very thin structures.

Source/drain series resistance is another concern. As device dimensions shrink, maintaining low resistance becomes more difficult, especially in thin-body and multi-gate designs. Strain engineering can improve carrier transport, but applying established techniques to non-planar structures adds process complexity. The roadmap also discusses high-mobility channel materials, while highlighting challenges such as interface quality, material integration on silicon, variability, and compatibility with thermal budgets.

Memory scaling depends on architecture and materials

DRAM and SRAM

DRAM scaling depends on preserving adequate storage capacitance as cell area decreases, while keeping leakage low enough to retain data. High-κ dielectrics, vertical transistor structures, and lower-resistance word and bit lines are among the approaches discussed. Moving toward a compact 4F² cell footprint also creates demanding lithography, etch, and high-aspect-ratio integration requirements.

For SRAM, scaling must preserve noise margin while managing variability, leakage, and instability. These concerns are important because SRAM is used as fast on-chip memory. In both memory types, smaller dimensions do not remove circuit-level requirements: cells still have to operate with adequate margins and acceptable reliability.

Flash and emerging non-volatile memory

Conventional Flash faces limits related to dielectric scaling, charge storage, interference between cells, and the small number of electrons involved in setting a cell’s threshold voltage. Three-dimensional NAND addresses density through vertically stacked structures, but the roadmap identifies cost-effective fabrication, layer count, and reliable operation as significant challenges. The stack itself adds process and integration demands.

Other non-volatile memory approaches—including FeRAM, MRAM, phase-change memory, and ReRAM—are considered as possible routes beyond charge-storage Flash. Their potential does not eliminate implementation hurdles. Density, endurance, latency, cost, and the need for effective cell selection or isolation all influence whether an architecture can be integrated at scale.

Interconnect, metrology, yield, and reliability are linked

Transistors are only part of the scaling equation. Interconnects distribute signals, clocks, power, and ground across a chip, and their resistance and capacitance affect delay and performance. The roadmap also describes reliability concerns in copper and low-κ dielectric systems, including electromigration, mechanical weakness, interface issues, and sensitivity to heat and moisture.

At the manufacturing level, increasingly small features make defect detection and process control more demanding. Complex three-dimensional structures call for measurements that capture more than a single critical dimension; relevant characteristics can include feature height, sidewall angle, roughness, and film thickness. The roadmap points to hybrid metrology, in which information from different instruments contributes to a more complete measurement model.

Yield learning also depends on connecting information across facilities, design, process, electrical testing, and work in progress. As the roadmap emphasizes, combining measurements and analysis can support root-cause investigation. This is especially important when multiple patterning and other complex process steps create additional sources of variation.

Reliability requires similar cross-functional attention. New materials and structures may enter manufacturing faster than long-term failure data can be gathered. Gate-dielectric breakdown, threshold-voltage shifts, interconnect degradation, and statistical variation all affect how devices behave over time. Reliability assessment must account for failure distributions and the uncertainty in lifetime projections, not merely whether a device passes initial testing.

Practical implications for engineering decision-makers

The More Moore roadmap’s central lesson is that scaling progress depends on coordinated decisions across device design and manufacturing. For engineers and technical leaders evaluating semiconductor-based systems, the practical considerations include:

  • Balance performance with power: More processing capability must fit within thermal, battery, or system power limits.
  • Account for integration complexity: New device materials and three-dimensional structures affect process compatibility, metrology, and yield.
  • Evaluate memory and interconnect together: Storage density alone does not determine system performance; latency, wiring, and reliability also matter.
  • Include reliability early: Material and structural changes can introduce failure mechanisms that need characterization and modeling.

Semiconductor technology scaling remains a multidimensional engineering problem. Shrinking devices can contribute to greater density and capability, but progress also depends on controlling power, integrating memory and interconnects, measuring complex structures, improving yield, and establishing reliability. For organizations that depend on semiconductor-based automation and computing, understanding these trade-offs helps frame technology choices around system requirements—not transistor dimensions alone.

Access Official Technical PDF

About The Author