Semiconductor testing is becoming more closely connected to design, manufacturing, system reliability, and post-silicon validation. The technical program at the 2020 International Test Conference highlighted how engineers are responding to increasingly complex devices, new packaging approaches, and demands for dependable operation. For automation and semiconductor professionals, the themes point to a practical shift: test must provide useful information throughout a product’s lifecycle, not only identify manufacturing defects at the end of a process.
Semiconductor testing must keep pace with device complexity
Conventional test methods remain essential, but advanced technologies introduce failure mechanisms that may not be well represented by broad, simplified fault models. As defects become more granular or dependent on physical layout, test teams need ways to connect likely defect locations with appropriate test patterns.
Automatic test pattern generation (ATPG) has traditionally relied on models such as stuck-at faults and timing-related faults. These approaches make test generation practical, but they can miss some defects inside cells or between them. Defect-oriented methods aim to address that gap by targeting specific defect types and locations. Techniques discussed at ITC included cell-aware testing, gate or cell exhaustive testing, and methods that account for timing when targeting small-delay defects.
The engineering challenge is to improve defect detection without making test application prohibitively long or costly. That requires balancing fault-model detail, pattern quality, test time, and the capabilities of design-for-test (DFT) tools and hardware.
AI and data analytics extend test and diagnosis
Machine learning featured across the conference program, including applications in failure analysis, prediction, yield improvement, and semiconductor manufacturing. The underlying opportunity is to make better use of data already generated during design, process characterization, production test, and diagnosis.
These data sources can help engineers identify patterns associated with failures or reliability concerns. However, applying a model in a practical engineering environment involves more than selecting an algorithm. Teams must consider whether the data is suitable, how analytical results fit existing workflows, and where human expertise is needed to interpret findings. One tutorial described an intelligent engineering assistant that incorporates human perception into analysis, reflecting the importance of combining automated methods with practitioner judgment.
AI also creates test challenges of its own. Specialized AI chips require DFT approaches suited to their hardware, while the use of machine learning in test and debug raises questions about how to make analytical methods useful and deployable in real engineering settings. For operations and engineering leaders, the takeaway is to treat data analytics as part of a wider test strategy, connected to established processes and engineering decisions.
Chiplets and 3D integration add test-access requirements
Chiplets and 2.5D and 3D-stacked integrated circuits can help address the demands of emerging workloads, but they change how engineers approach test access and test flow. In a stacked device, test equipment must reach individual dies, and the design needs suitable test-access architectures across the stack.
Through-silicon vias and other interconnects introduce additional structures and potential fault locations to consider. Test planning must account for probe access, the organization of DFT across multiple dies, and the sequence in which components are tested. These choices also affect the overall cost of testing the assembled stack. Standards such as IEEE 1838 were identified as relevant to test-access architectures for 3D-stacked ICs.
For system integrators and product teams, early coordination is important: decisions about packaging, die interfaces, and test access influence what can be observed and diagnosed later. Testability is therefore a design and integration consideration, not simply a production-floor activity.
Automotive reliability calls for lifecycle-wide test
Automotive semiconductor testing must address quality, functional safety, and reliability across multiple stages, from design and silicon bring-up to volume production and in-system operation. The program covered test approaches for safety-critical systems, including power-on and power-off self-test, periodic in-field self-test, repair, and error correction.
Standards including ISO 26262 provide a framework for functional safety requirements. The related engineering work involves considering how test and diagnostic mechanisms support the required safety objectives across the product lifecycle. As devices operate in applications where dependable behavior matters, test planning must extend beyond screening at manufacture and consider how faults may be detected during operation.
Mixed-signal and analog devices bring their own DFT considerations. The conference tutorials addressed analog fault simulation, built-in self-test (BIST) for functions such as converters and phase-locked loops, and methods for improving test access and defect coverage. These approaches are relevant where traditional digital test methods alone are not sufficient to assess circuit behavior.
Connect test, validation, and manufacturing data
Post-silicon validation and production test have different objectives, but they can share infrastructure and information. Validation may examine functionality, software compatibility, electrical characteristics, or speed paths. DFT features such as scan, tracing, triggering, and array access can also support bring-up and debug when designed with those uses in mind.
Across the lifecycle, a coordinated approach can help engineering teams use available data more effectively. It also highlights the need to plan instrumentation, observability, and test access early, while considering trade-offs involving power management, security, and physical design.
Practical implications for engineering teams
The themes from ITC 2020 suggest several priorities for semiconductor and automation organizations:
- Review fault-model coverage. Assess whether conventional ATPG methods address the defect types and locations relevant to the technology.
- Plan DFT alongside architecture. Consider AI hardware, mixed-signal blocks, chiplets, and stacked dies when defining test access and observability.
- Connect analytics to engineering workflows. Use manufacturing and test data with clear attention to data quality, interpretation, and practitioner input.
- Address reliability across the lifecycle. For safety-critical applications, consider test and diagnostic needs from design through in-system operation.
- Coordinate test and validation. Identify where infrastructure and information can support both production screening and post-silicon debug.
Conclusion
Semiconductor testing is broadening to meet the demands of more complex devices and applications. Defect-oriented ATPG, machine-learning-assisted analysis, test strategies for chiplets and 3D integration, and lifecycle-focused automotive reliability all reinforce the need to treat testability as a system-level engineering concern. For technical decision-makers, the practical priority is to align design, test, manufacturing, and validation teams early so that devices can be tested, diagnosed, and supported with the access and information their applications require.