Access Official Technical PDF

Share Summary:LinkedInEmail

VLSI design support is more than access to electronic design automation software or a route to fabrication. It also depends on design-flow guidance, practical training, test capability and facilities that researchers can share. The University of Tokyo’s VLSI Design and Education Center (VDEC) brought these elements together to support chip-design research and education across Japanese universities and colleges of technology.

VDEC’s 2018 annual report describes an infrastructure developed over more than two decades. Its model is relevant to technical organizations working with complex hardware: providing tools is only part of the job. Users also need help learning the tools, preparing designs for fabrication, evaluating results and sharing expertise across institutions.

VLSI design support built around shared resources

Established in 1996, VDEC organized its work around three core activities: distributing information and education related to LSI design, providing CAD software for design education, and supporting VLSI chip prototyping. The center also maintained shared equipment and supported research connecting design with test.

In 2018, the center director reported that roughly 300 research laboratories used VDEC’s chip-prototyping services and design tools annually. Nearly 200 laboratories used cleanroom facilities and equipment for device prototyping. These figures illustrate the scale of the shared-resource approach described in the report, rather than a model built around each laboratory acquiring and maintaining every capability independently.

For engineers and technical decision-makers, the key point is organizational: access to specialized infrastructure can be paired with processes that help users apply it. This is especially important when work spans design software, fabrication processes, measurement equipment and specialist knowledge.

CAD tools need training and design-flow guidance

VDEC provided tools from multiple vendors for tasks including HDL-based design, simulation, logic synthesis, test generation, layout, verification and analog or RF circuit work. Software was made available to eligible university and college users through a network of regional license servers. Use required registration, and access was limited to education and research purposes.

Providing software, however, does not ensure that users can operate a complete design flow. Tool environments are complex, and a design may depend on several applications working together. VDEC therefore held vendor-led CAD seminars and sessions on practical design flows. Courses addressed topics such as analog, RF and MEMS design, alongside process-specific transistor-level and digital design methods.

Training was structured for different audiences. Introductory sessions helped users learn tools and workflows, while advanced sessions served experienced designers. The center also offered refreshers for working professionals, combining instruction with exercises. Remote video delivery to regional sites widened access beyond the Tokyo venue.

Peer support complemented formal instruction. VDEC users could join mailing lists to ask questions about CAD software or prototyping. The accumulated discussions were made available to registered users as a reference resource. A designer forum provided another setting to exchange design experiences, including difficulties, unsuccessful approaches and solutions—practical knowledge that may not appear in conventional technical presentations.

Chip prototyping connects design to verification

VDEC coordinated prototype runs across a range of CMOS processes and other technologies. The 2018 report lists offerings that included 0.18-micrometer and 0.8-micrometer CMOS, SOTB 65-nanometer CMOS and FD-SOI 28-nanometer CMOS. Process availability changed over time as services ended, new options were introduced and design activity shifted toward finer process technologies.

That transition affects more than the nominal dimensions of a chip. The report notes that the total fabricated chip area declined as processes became finer, while area normalized to process feature size continued to increase. It suggests that growing design effort associated with finer processes contributed to changes in the number and area of prototypes. In practical terms, access to a fabrication route must be supported by suitable libraries, design rules and flows—not simply by a process name on a menu.

VDEC developed libraries and design kits to help users prepare designs, including a process design kit for analog design using a 0.18-micrometer CMOS process. Shared facilities also supported evaluation after fabrication. Equipment included LSI test systems, probing and measurement tools, focused ion beam (FIB) equipment and electron-beam lithography systems. Some equipment was available through user qualification or with technical support, reflecting the specialized nature of its operation.

Design for test and cross-disciplinary research

The center’s Design To Test (D2T) research unit addressed the connection between chip design and test. Its stated purpose was to provide an environment for education and research spanning design through testing, and to develop expertise in test engineering. This perspective matters because a prototype is not an endpoint: researchers also need ways to assess circuit behavior and investigate the causes of errors or performance differences.

Reported research topics included power-supply integrity during testing, test-data analysis, analog-to-digital conversion and measurement techniques. One project examined how differences between the power environments of automated test equipment and a customer board could affect test outcomes. Other work considered methods for modeling and controlling power-supply behavior. These examples show how test research can inform both design decisions and the methods used to evaluate devices.

VDEC also supported device fabrication and nanotechnology facilities, with equipment made available to academic, industrial and public-sector users. Its activities included work across VLSI and post-processing, reflecting a wider interest in combining semiconductor fabrication with other technologies and research disciplines.

Practical implications for engineering organizations

VDEC’s 2018 activities point to several considerations for organizations building or using shared semiconductor development infrastructure:

  • Pair tool access with enablement. Training, design-flow instruction and peer knowledge can help users make effective use of complex CAD environments.
  • Connect design and fabrication. Process-specific libraries and design kits help translate design intent into a manufacturable prototype.
  • Plan for evaluation. Test and measurement capabilities are part of the development environment, not an afterthought.
  • Support different levels of expertise. Introductory courses, advanced training and professional refreshers address distinct user needs.
  • Coordinate specialist equipment. Shared facilities can broaden access, while qualification and technical assistance help manage equipment use.

VDEC’s stated direction was to extend beyond chip and device prototyping toward broader support for electronic-system research and development. The practical lesson is that effective VLSI design support depends on an integrated ecosystem: software, process access, training, test expertise and shared facilities must work together. For industrial automation and electronics teams, that model underscores the value of planning development resources across the full path from design through prototype evaluation.

Access Official Technical PDF

About The Author