Access Official Technical PDF

Share Summary:LinkedInEmail

Solar thermal concentrators use mirrors, lenses or combined optical elements to focus solar beam radiation from a broad aperture onto a smaller receiver. The resulting increase in solar flux can produce higher delivery temperatures than a conventional flat-plate collector, making these systems relevant to process heat, solar cooking and power generation. For engineers and project decision-makers, the central design question is not simply how much sunlight a concentrator gathers, but how its optical principle, tracking needs and receiver configuration fit the intended application.

How solar thermal concentrators work

A concentrator collects radiation over an aperture area and directs it toward a receiver. The relationship between those areas is commonly described by the geometrical concentration ratio: aperture area divided by receiver area. A higher ratio can concentrate energy onto a smaller absorber, but it also makes optical performance and heat loss important considerations.

Concentrators primarily use beam radiation. Reflective designs redirect incoming rays toward a focal point or line; refractive designs bend them through a lens; and hybrid designs combine reflection and refraction. Luminescent concentrators work differently: materials such as quantum dots absorb and re-emit light, which is guided toward attached solar cells by total internal reflection.

Performance is considered through several measures. Optical efficiency describes how effectively incoming radiation reaches the receiver. Thermal efficiency concerns useful heat output relative to solar input, while exergy analysis considers the quality of the energy delivered. These measures describe different aspects of system behavior and should not be treated as interchangeable.

Solar concentrator types and tracking requirements

Concentrators can be classified by design, optical principle, tracking approach and whether they focus to a point or line. The main design families include parabolic dishes, parabolic troughs, compound parabolic concentrators (CPCs), Fresnel lens systems, linear Fresnel reflectors, fixed-mirror systems, dielectric concentrators and quantum-dot solar concentrators.

Reflective and refractive designs

Parabolic dishes focus radiation onto a point receiver, while cylindrical parabolic troughs focus it along a line. In a dish system, the receiver sits at the parabola’s focal point. A heat-transfer fluid can be heated there and used with an engine, or the system can support solar cooking. Trough systems place a receiver tube along the focal line, with fluid flowing through the tube to collect heat.

Fresnel lens solar concentrators use a grooved refracting surface to direct radiation toward a receiver. They are used in concentrating photovoltaic applications as well as thermal designs. Linear Fresnel reflectors instead use rows of long, narrow mirrors to direct radiation toward a fixed receiver. The receiver transfers the captured heat to a working fluid, which can then supply a power-generation process.

Non-imaging and non-tracking options

A CPC is a non-imaging reflector designed to collect radiation across an acceptance angle and direct it toward a receiver. Its relatively broad acceptance angle can reduce the need for continuous sun tracking, although some designs are turned intermittently to improve collection. CPCs can be used for water or air heating and can also be integrated with photovoltaic modules in photovoltaic-thermal systems.

Tracking requirements vary across designs. One-axis systems follow the sun along a single axis; examples include linear concentrators and some CPC arrangements. Two-axis tracking accommodates daily and seasonal solar movement and is used with point-focusing systems such as parabolic dishes. By contrast, quantum-dot solar concentrators are non-tracking devices that can guide both direct and diffuse solar energy toward attached cells.

Matching concentrator design to the application

High-temperature applications place particular importance on receiver design and thermal losses. In parabolic dish systems, radiative losses at the receiver can be significant; reducing receiver area can help reduce those losses, but the receiver must still intercept the focused beam. In trough systems, the receiver tube and its heat-transfer fluid determine how collected energy is carried away. Evacuated space between the receiver and its surrounding glass tube is one described approach to limiting convective heat loss.

Linear Fresnel reflectors offer a different arrangement: multiple mirror rows direct radiation to a shared, fixed receiver. This layout is suited to supplying heat to a working fluid, but receiver heat losses and fluid-flow requirements remain part of the system analysis. Pressure drop and the pumping power needed to move fluid through the receiver are also considered in thermal and exergy assessments.

Hybrid photovoltaic-thermal configurations combine electricity generation with useful heat collection. In a PVT-CPC system, a photovoltaic module is integrated with a CPC and a fluid channel. The fluid can remove heat from the module and absorber while providing heated water or air. Designs may be partially or fully covered with photovoltaic cells, or use a conventional glazed absorber; the configuration affects the balance between electrical output and thermal collection.

For project evaluation, useful questions include:

  • Is the target application high-temperature process heat, lower-temperature heating, cooking or electricity generation?
  • Can the site accommodate the tracking approach required by the selected design?
  • How will receiver area, optical losses and heat losses affect useful output?
  • Does the system need to deliver heat, electricity or both?
  • Are fluid flow and associated pressure drop included in the performance assessment?

Practical implications for system selection

Solar thermal concentrators are not a single technology but a family of optical systems with different focusing geometries, tracking requirements and receiver arrangements. Point-focusing dishes can supply high-temperature heat, while troughs and linear Fresnel reflectors focus energy along a line. CPCs and photovoltaic-thermal designs offer other ways to collect and use solar energy, including configurations that combine heat and electricity.

For industrial and energy projects, selection should begin with the required output and operating conditions, then account for optical efficiency, receiver losses, tracking and fluid-side performance. Comparing those factors together gives engineers and decision-makers a more practical basis for matching a concentrator architecture to its intended thermal or electrical application.

Access Official Technical PDF

About The Author