Access Official Technical PDF

Share Summary:LinkedInEmail

Solar water splitting offers a way to use sunlight to produce hydrogen, but practical systems must balance conversion efficiency, materials cost and the electrical requirements of the water-splitting reactions. One approach combines a perovskite-silicon tandem photovoltaic cell with an electrolyser and non-precious-metal catalysts. This integrated configuration can provide the voltage needed to drive hydrogen and oxygen production without an external electrical bias.

For engineers and technical decision-makers, the central design challenge is not simply choosing an efficient solar cell. The photovoltaic device, catalysts and electrolyser must work together as a system. Tandem cells can broaden the portion of the solar spectrum used, while cell architecture and interconnection affect how effectively the generated voltage and current meet the requirements of the reactions.

Why tandem cells matter for solar water splitting

Water splitting requires sufficient energy to drive the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In practice, losses associated with the reaction mechanism mean a single light-absorbing semiconductor needs a relatively wide bandgap. That limits how much of the solar spectrum it can use and constrains the potential efficiency of a single-absorber system.

A tandem structure addresses this limitation by combining light absorbers with different bandgaps. The top and bottom cells can capture different parts of the solar spectrum, making more effective use of incoming sunlight. The whitepaper notes that mechanically stacked tandems with a silicon bottom cell have theoretical solar-to-hydrogen (STH) efficiency limits above 30%, while a perovskite top cell paired with silicon has been identified as a promising route to STH efficiency above 20%. These are potential efficiencies, not guaranteed operating results for every system.

High-efficiency demonstrations have often used III-V semiconductor materials, which can increase system cost. Perovskite-silicon tandems offer an alternative direction: the perovskite top cell can be designed with a bandgap around 1.73 eV, while silicon acts as the bottom cell. The tandem approach aims to retain strong light conversion while supporting a lower-cost system design.

Matching photovoltaic output to the electrolyser

In a photovoltaic-electrolysis system, the solar cell is electrically connected to an electrolyser. For operation without external bias, the photovoltaic device must supply adequate photovoltage to drive the reactions. Its output also needs to be compatible with the current and voltage demands of the electrochemical components.

This makes system integration a key engineering task. A photovoltaic cell’s headline conversion efficiency alone does not establish how well it will perform in a solar hydrogen configuration. Designers must consider the operating point of the integrated system and how the photovoltaic output aligns with the electrolyser and reaction requirements.

The described system combines perovskite-silicon tandem cells with nickel-iron-based catalysts to demonstrate bias-free solar hydrogen production. The tandem’s high open-circuit voltage is used to help meet the photovoltage requirement. The architecture also gives designers flexibility to configure cells around the voltage needs of water splitting, rather than relying on an external power source to provide the required bias.

Choosing between two-terminal and four-terminal tandems

Two-terminal (2-T) and four-terminal (4-T) tandem designs differ in how their sub-cells are electrically and structurally integrated. That distinction affects fabrication choices and the constraints designers face when coordinating the outputs of the top and bottom cells.

Two-terminal architecture

A 2-T tandem electrically connects the sub-cells as part of a more integrated structure. This arrangement brings current matching into the design: the combined device’s operation depends on the relationship between the current produced by each sub-cell. That requirement can limit flexibility in cell selection and assembly.

Mechanically stacked four-terminal architecture

A mechanically stacked 4-T tandem provides separate electrical connections for its sub-cells. According to the whitepaper, this approach places fewer restrictions on fabrication and current matching than the 2-T architecture, giving designers more flexibility in assembling each sub-cell. That flexibility can help when selecting a configuration to meet the photovoltage and current requirements of water splitting.

The choice between architectures is therefore a system-level decision. It involves not only photovoltaic performance, but also manufacturing approach and the electrical matching needed for the intended electrochemical load.

Reducing catalyst cost with earth-abundant materials

Electrochemical water splitting depends on catalysts for both HER and OER. Platinum is identified as a standard catalyst for hydrogen evolution, while iridium oxide and ruthenium oxide are used for oxygen evolution. Their cost can restrict large-scale implementation, motivating the search for catalysts made from more abundant materials.

The described system uses nickel-iron-based catalysts as a lower-cost alternative. The source also points to research indicating that non-precious-metal catalysts can offer competitive performance relative to established precious-metal catalysts. Catalyst selection remains part of the overall system design: lowering material cost must be considered alongside the electrochemical performance required for the application.

Assessing an integrated system

Evaluating solar hydrogen equipment requires measurements that address the complete process rather than photovoltaic output alone. The described work assesses system performance using gas chromatography and photoelectrochemical characterisation. These methods support evaluation of gas production and electrochemical behaviour, helping establish how the integrated components operate together.

For system integrators and plant decision-makers, this emphasis on integrated assessment is important. Relevant questions include whether the tandem provides the required photovoltage, how the chosen interconnection affects cell matching, and whether the catalyst and electrolyser operate effectively with the photovoltaic source. The answers depend on the complete configuration, not on any single component in isolation.

Practical implications

Perovskite-silicon tandem photovoltaics paired with earth-abundant catalysts offer a promising design pathway for solar hydrogen production. Tandem cells can use a larger share of the solar spectrum, while four-terminal layouts can provide greater flexibility in cell assembly and current matching. Nickel-iron-based catalysts address the cost challenge associated with precious metals, and bias-free operation focuses attention on matching photovoltaic output to reaction requirements.

The practical takeaway is to treat solar water splitting as an integrated engineering problem. Cell architecture, photovoltage, current matching, catalyst choice and system-level testing all influence whether a design can meet its intended operating needs. Evaluating these factors together is essential when moving from promising component technologies toward a practical hydrogen-production system.

Access Official Technical PDF

About The Author