Solid-state manufacturing offers alternatives to processes that rely on melting materials or applying substantial external heat. For industrial automation engineers, system integrators and manufacturing leaders, these approaches are relevant to several persistent challenges: forming high-performance materials, joining dissimilar materials, and repairing or protecting components. Pacific Northwest National Laboratory (PNNL) has developed a suite of processes addressing these needs, with several available for licensing or research and development partnerships.
The technologies span extrusion, joining and surface deposition. Their uses and levels of development differ, so evaluating them starts with understanding how each process works and which production problem it is intended to solve.
Solid-state manufacturing for forming advanced materials
Shear Assisted Processing and Extrusion
Shear Assisted Processing and Extrusion, or ShAPE, is a method for producing wire, rods, tubes and other profiles from metal powder, flake, machining waste or solid billet. A canister containing the feedstock is forced into a rotating die. Friction at the material-die interface generates heat, softening the material being extruded without requiring feedstock preheating or external heat. Spiral grooves on the die face move material toward the extrusion opening and reduce the force needed to form it.
The process can consolidate feedstocks into finished forms, including material that would otherwise require additional powder-processing steps. In one example described by PNNL, nanostructured aluminum powder was extruded directly into round bars using 50 times less force and lower power consumption than conventional extrusion, while achieving twice the ductility. These figures apply to that example, rather than representing a universal result for every material or part.
ShAPE has also demonstrated a 200:1 extrusion ratio for magnesium in a single pass. The process can influence grain refinement and microstructure orientation, and magnesium extrusions have shown improved ductility and energy absorption. Potential applications under investigation include high-strength aluminum rods for aerospace, creep-resistant steels for power-industry heat exchangers, and materials for electric motors and thermoelectric devices.
Joining dissimilar materials without fusion
Friction Stir Scribe
Conventional friction stir welding can join materials of different thicknesses, but joining materials with substantially different melting points—such as steel and aluminum—presents challenges. Friction Stir Scribe modifies the process with a small cutting tool, or scribe, that cuts into the harder material. This helps create a chemical bond, a mechanical interlock, or both with the softer material placed above it.
The resulting continuous joint does not require filler or fusion material. The process is intended for combinations that can be difficult to join by conventional welding, including steel and aluminum. PNNL also identifies possible applications involving polymers and metals or composites, including in transportation, energy and consumer electronics. For manufacturers already using friction stir welding equipment, the technology is described as a retrofit option.
Friction Stir Dovetailing
Friction Stir Dovetailing is designed to join thicker aluminum sections to steel. A specially shaped tool deforms aluminum into a dovetail groove in the steel, creating a mechanical interlock. During the same operation, the tool forms a thin metallurgical bond at the bottom of the groove.
Combining these mechanisms is intended to produce a strong, ductile joint while limiting growth of the intermetallic compound that can make dissimilar-metal joints brittle. The technique has been demonstrated for military vehicle applications and may also be relevant to marine, offshore oil and gas, and other large structures. Other material pairings under consideration include aluminum with copper or magnesium, and magnesium with steel.
Friction Stir Interlocking
Friction Stir Interlocking targets joints between lightweight metals and non-metallic materials such as composites, thermoset plastics and ceramics. One approach embeds metal inserts in the non-metal, then friction stir welds a metal sheet or plate to the insert. Another uses metal pins through the non-metal as mechanical fasteners that are joined to the metal sheet or plate.
The process is intended to create multiple interlocks in a single pass. PNNL identifies potential uses in automotive lightweighting and other applications requiring robust joints between aluminum or magnesium and non-metals. The process may also reduce galvanic and pitting corrosion between metal fasteners and carbon fibers by forming corrosion barriers during friction stir processing.
Cold spray for coatings and component repair
Cold spray is a solid-phase deposition process rather than a joining or extrusion method. Metal particles are accelerated to supersonic velocities and impact a surface with enough energy to bond. Because the process uses low heat input, it produces highly cold-worked microstructures associated with hardness, wear resistance and corrosion resistance.
PNNL is developing cold spray applications for hydropower, nuclear and automotive uses, building on technical advances developed primarily for defense applications. A project team demonstrated a material with three times the cavitation erosion resistance of stainless steel plate or filler metal, and about eight times that of heat-affected-zone carbon steels common in hydroturbines. These results are specific to the demonstrated material and comparison. PNNL’s next-generation high-pressure system is intended to support process development for both automated factory production and manual field repair. Cold spray is not currently available for licensing.
Assessing fit for production
Each process addresses a different manufacturing requirement. ShAPE focuses on converting diverse feedstocks into consolidated extrusions. The friction stir processes create solid-state joints across challenging material combinations, using different strategies for thin sheets, thicker sections or metal-to-non-metal connections. Cold spray deposits material onto a surface for applications such as wear protection or repair.
For engineering and operations teams assessing these options, relevant questions include:
- What materials, feedstocks, geometries and joint configurations does the part require?
- Does the production challenge involve forming, joining or surface protection?
- What equipment changes, process development or partnership work would be needed for evaluation?
- Which performance requirements—such as ductility, energy absorption, corrosion resistance or wear resistance—must the component meet?
Several PNNL technologies are available through exclusive or non-exclusive licensing options. An exploratory license is also described as a six-month evaluation opportunity for $1,000, with the right to reserve the technology. Availability varies by process; cold spray is still under development and is not yet available for licensing.
Conclusion
These solid-state manufacturing processes offer distinct routes to material forming, dissimilar-material joining and durable surface deposition. Their practical value depends on matching the process to the component, material combination and production requirement—not on treating them as interchangeable solutions. For manufacturers exploring advanced materials or new component designs, reviewing the relevant process and its licensing or development status is a useful first step toward assessing production fit.