A solid state power substation (SSPS) uses strategically integrated high-voltage power electronic converters to add control capabilities at critical grid nodes. For utilities and the engineers who design, operate and integrate power infrastructure, the concept offers a potential response to changing generation and load patterns: instead of relying only on conventional equipment, a substation could actively manage how power moves between sources and loads.
The technology is a development pathway, not a universal replacement for conventional substations. Its value depends on whether the functions enabled by converters justify their cost in a particular application—and on resolving technical, operational and institutional challenges.
Why substations need more flexibility
Conventional substations connect parts of the power system, transform voltage, and provide switching, monitoring and protection. Their designs are often customized to local electrical conditions and operating requirements. That customization can add engineering and integration complexity, particularly when equipment must work with legacy assets or meet changing requirements.
Grid conditions are also evolving. Distributed energy resources (DERs), variable renewable generation, energy storage and new electrically intensive loads can change the direction and variability of power flows. For example, distribution systems designed around power flowing from transmission toward customers may also experience reverse flows as local generation increases. This can complicate protection coordination, voltage regulation and equipment operation.
Other pressures include aging infrastructure, cybersecurity concerns, severe weather and changing system dynamics. Sensors, communications and analytics can improve visibility, but the roadmap notes that digital upgrades alone do not address every limitation in the underlying electrical hardware. More controllable substation equipment may help manage power flow and voltage as system conditions change.
What a solid state power substation does
Power electronic converters switch and convert electrical power—for example, between alternating current (AC) and direct current (DC). In an SSPS, converters are envisioned as modular, scalable components that can act as power routers or hubs. Depending on their design and application, they could control bidirectional power flow, provide electrical isolation, and connect systems with different voltages, frequencies or current types.
Potential functions include active and reactive power control, voltage and frequency management, and support for hybrid AC/DC networks. The roadmap also identifies possible roles in managing harmonics and voltage transients, coordinating with energy storage, supporting islanded operation, and facilitating energy dispatch or black starts. These are potential capabilities, not automatic outcomes: converter architecture, controls, protection and grid integration determine what a deployment can deliver.
Three stages of SSPS development
The roadmap describes three classifications that mark increasing application scale and functionality. Each stage builds on capabilities identified for the previous one.
- SSPS 1.0: Envisioned for applications up to 34.5 kV and 10 MVA. Functions include bidirectional power flow with isolation, active and reactive power control, and support for hybrid or multi-frequency systems. The classification also includes fault ride-through, local intelligence and cyber-physical security features.
- SSPS 2.0: Extends the concept up to 138 kV and 100 MVA. Added capabilities include serving as a secure communications node, coordinating fault current and protection in AC and DC distribution systems, and controlling power exchange between transmission and distribution while buffering their interactions.
- SSPS 3.0: Represents a longer-term vision spanning all voltage and power levels. It includes coordination among multiple converters, autonomous plug-and-play operation, automated recovery and restoration, and the possibility of asynchronous, decoupled grid segments.
The proposed progression begins with distinct grid nodes and local applications, such as facilities or community generation and storage. Later stages extend toward distribution substations and broader system coordination. The final stage is a vision for how the grid might be designed and operated—not a description of current, widely deployed capability.
Engineering challenges to address
Making SSPS practical requires advances across the converter, the substation and the wider grid. The roadmap groups the work into several connected areas:
- Converter architecture and protection: Engineers need architectures suited to multiple applications, along with dependable fault detection, isolation and protection coordination.
- Components and thermal management: Power semiconductors, gate drivers, sensors, magnetic and dielectric components, packaging and cooling all affect converter cost and performance. The roadmap calls for research into wide-bandgap devices and advanced thermal management.
- Controls and communications: Converter controls must coordinate with substation equipment and, where applicable, utility energy and distribution management systems. Secure, interoperable communications are also important as functionality expands.
- Grid models and testing: Better system models, simulation methods, hardware-in-the-loop testing and performance benchmarks are needed to evaluate operation from the converter level through the wider power system.
- Deployment and acceptance: Cost-benefit analysis, standards, regulations, testing practices and workforce education all influence whether utilities and other operators can adopt the technology.
These issues are interdependent. A converter’s technical capability has limited value if protection schemes cannot accommodate it, models cannot represent its behavior, or its benefits cannot be evaluated against deployment and operating costs.
What the roadmap means for grid stakeholders
The roadmap sets out near-, mid- and long-term work rather than a single installation recipe. Early priorities include establishing multidisciplinary research, developing and testing converter modules, creating baseline characterization methods, improving grid models and engaging utilities and standards organizations. Midterm activities include advancing hardware-in-the-loop testing, developing adaptive protection and controls, and demonstrating converters that use newer components. Longer-term work explores system-wide coordination, advanced controls and broader substation applications.
Utilities, system integrators and plant or facility operators assessing the concept should start with the application. Identify the power-flow, voltage, protection or AC/DC integration need, then determine which converter functions are necessary and how they would interact with existing equipment. Evaluation also needs to account for testing, cybersecurity, communications, maintainability and the evidence required to establish a credible cost-benefit case.
Conclusion
Solid state power substations offer a way to place more active power-flow and voltage control at grid nodes. Their potential relevance grows as DERs, variable generation and changing loads create operating conditions that conventional substation designs may not address easily. Realizing that potential will require more than converter hardware: protection, controls, thermal management, modeling, standards and deployment economics must advance together. For technical decision-makers, the practical first step is to match a clearly defined grid need with the SSPS capabilities that can be tested and justified for that application.