Stretchable transistor arrays could help bring electronics onto curved, moving surfaces without relying on rigid components or complex transfer steps. In a demonstrated approach, every functional layer is deposited by inkjet printing: stretchable electrodes and interconnects, a semiconducting carbon nanotube channel, and an ionic polymer gate dielectric. The result is a low-voltage transistor platform designed for wearable and skin-like electronics, with an additional capability: its electrical response can mimic aspects of synaptic behavior.
For automation engineers and technical decision-makers, the work is notable less as a ready-made industrial product than as a manufacturing and device-design example. It shows how additive patterning, soft materials and transistor functions can be combined, while also making clear the trade-offs that matter when considering such devices for practical systems.
How inkjet printing enables stretchable transistor arrays
Conventional microelectronics processes can be difficult to apply to mechanically soft materials. Photolithography, evaporation and other established techniques may involve masks, alignment steps or transfers that complicate fabrication over large areas. Inkjet printing offers a different route: it deposits material only where required, without physical contact or a mask, and digital layouts can be changed by updating the print file.
The reported array uses three principal materials. Conductive PEDOT:PSS forms the source, drain and gate electrodes, along with interconnects. A network of semiconducting single-walled carbon nanotubes (SC-SWCNTs) provides the transistor channel. A printed PVDF-HFP polymer acts as the gate dielectric. Elastomer layers provide encapsulation and a stretchable support.
Printing the layers in sequence requires attention to material compatibility. Solvents used for one layer must not damage previously deposited films, and the process must control the surface so that subsequent inks spread and form reliable features. The fabrication sequence also includes local encapsulation, openings for electrical connections, and transfer from a rigid silicon handling wafer onto a stretchable substrate. A water-soluble sacrificial layer enables that release step.
Why the ionic gate dielectric supports low-voltage operation
In a field-effect transistor, the gate voltage controls current through the channel. The printed PVDF-HFP dielectric has an ionic character that produces electric double-layer capacitance at the interface. This high interfacial capacitance allows the channel to be controlled at low voltage, without depending on an extremely thin, uniform dielectric film.
The devices operated with gate and drain voltages around 1 V and showed an on-to-off current ratio greater than 104. The reported average mobility was 27 ± 5 cm2 V-1 s-1, and maximum transconductance averaged 47 ± 9 μS. The gate leakage current was negligible in the reported measurements, and the devices remained functional after several days in ambient conditions.
These values describe the demonstrated devices, not a general guarantee for printed transistor arrays. The researchers also observed hysteresis associated with the slow movement of ions in the dielectric. That behavior affects how transistor parameters are extracted and can make the threshold voltage depend on the history of applied voltages.
Mechanical performance and integration considerations
Because the channel, electrodes and supporting layers use intrinsically stretchable materials, the transistors were tested under mechanical strain. Electrical performance was maintained at strains up to 20% in tests along directions both parallel and perpendicular to the channel. Some current degradation occurred during stretching parallel to current flow, which the authors attributed mainly to contact damage; the current returned after the device was relaxed.
The demonstrated architecture also had clear limits. Beyond 20% strain, devices failed mainly because the gate electrode and interconnects cracked. Yield decreased beyond 10% strain during testing, reflecting the handling involved as well as the vulnerability of these features. Printing direction contributed to anisotropy in the layers, and the researchers identified improved print uniformity, electrode geometry and encapsulation as possible ways to address reliability.
Array layout was digitally configurable, and the study demonstrated arrays ranging from 2 × 3 to 3 × 20 devices. These were proof-of-concept structures rather than densely integrated production circuits. The process highlights a potential advantage of digital printing for soft substrates: features can be remeasured and layouts adjusted when thermal or mechanical processing changes their dimensions.
Synaptic response—and the switching-speed trade-off
The ionic dielectric also gives the transistors a time-dependent response. When voltage pulses are applied to the gate, ions move toward the dielectric interface and alter the channel current. After the pulses stop, the ions gradually relax, and the current returns toward its initial state. This short-term memory effect resembles short-term synaptic plasticity.
In the reported tests, trains of negative gate pulses produced an excitatory postsynaptic-current-like response, while positive pulses produced an inhibitory response. Increasing pulse number, amplitude or frequency increased the current change and extended the time needed for recovery. For example, 32 pulses at 25 Hz produced a larger response and longer relaxation than a single pulse. This behavior points to potential uses in wearable bioelectronics, neural interfaces and neuromorphic systems, where temporal response can be useful rather than undesirable.
That same ionic response limits switching speed. Applications requiring rapid, conventional transistor switching may not suit this design without changes to the device architecture or materials. Its strongest fit is where softness, conformability, low operating voltage or synaptic-like behavior is more important than fast switching.
Practical implications
Inkjet-printed stretchable transistor arrays demonstrate how additive manufacturing can combine soft materials and active electronics in a fully printed device stack. The approach offers digital patterning and low-voltage operation, while the carbon nanotube channel and elastomeric structure support mechanical compliance. At the same time, ionic hysteresis, slow response and cracking in gates and interconnects remain significant engineering considerations.
For system designers, the practical takeaway is to match the device behavior to the application. These transistors are promising for exploratory wearable, skin-like and bioelectronic systems that can use slow, history-dependent responses. Moving toward robust integrated products will require addressing interconnection reliability, strain tolerance and switching requirements alongside the benefits of maskless, solution-based fabrication.