Vibration measurement equipment rentals can help engineering and operations teams equip a test for a specific task without relying on a single sensor type or measurement setup. The Modal Shop’s March 2026 rental price list highlights new and expanded options for vibration, acoustics, environmental monitoring and dynamic pressure. For industrial teams, the practical takeaway is a broader set of tools for connecting sensors, working in challenging electrical environments and collecting measurements in the field.
Digital sensing simplifies test setup
Two additions focus on making vibration and sound measurements easier to connect to common computing devices. The DigiDAQ Series 485B39 provides two channels for ICP/IEPE or voltage sensors and connects to a phone, tablet or computer without requiring a driver. The Digiducer Series 333D takes a different approach: it combines a vibration sensor with digital output, so a separate external accelerometer is not needed. Both product families are available in kits that include a system controller and preinstalled software, with USB or USB-C connections.
These options may suit teams that want a compact measurement setup for troubleshooting, field checks or other tests where a conventional analyzer arrangement is not required. Before selecting a digital system, confirm that its channel count and sensor connection options fit the measurement plan.
Choosing accelerometers for the measurement environment
Accelerometer selection begins with the motion and frequency range a test needs to capture. Other considerations include sensor mass, mounting method, temperature, cable configuration and the electrical conditions around the measurement point. The expanded rental range addresses several specialized requirements.
- Low-amplitude and seismic measurements: The uniaxial 393C31 is identified for seismic and low-amplitude testing. The price list states that its noise floor and survivability each improve by at least five times compared with its predecessor.
- High-voltage testing: The HV356A03 triaxial accelerometer is intended for high-voltage environments up to 2,000 V.
- Electrically noisy locations: Case-isolated triaxial models 354B04 and 354B05 are offered for conditions such as EMI and ground-loop problems. Shield-grounded triaxial cables are also listed to help mitigate EMI effects.
- Shock and pyroshock: The 350B4x triaxial line combines mechanical isolation with electrical filtering, with models covering ranges from 5,000 g to 100,000 g.
For miniature measurement points, the list also compares 1-gram triaxial accelerometers spanning 500 g to 20,000 g. Connector and attached-cable configurations are available, and TEDS is offered on some models. That range is relevant when sensor size and mass are important constraints, but the appropriate model still depends on the required range and test conditions.
Match mounting and cabling to the test
A sensor’s stated measurement range is only one part of a reliable setup. Mounting affects how well vibration is transferred to the sensor, while cable choice needs to suit the environment and sensor connection. The rental catalogue includes mounting accessories, adaptors and cable types for different applications, including industrial use, lightweight sensors and charge-mode sensors.
Installation details also matter. Miniature accelerometers may require an appropriate removal tool to avoid damage, and magnetic bases need careful handling because installation forces can shock a sensor. For tests in wet, moist or dusty environments, the price list points to hermetically sealed sensor options, including fully submersible models. Confirm the environmental requirements and compatible accessories when specifying a rental.
Acoustic and environmental monitoring options
The expanded portfolio extends beyond vibration. The Larson Davis Model 821 sound level meter is a Class 1 instrument with available options for sound recording, one-third-octave measurement, NC/RC curve testing and unattended outdoor monitoring kits. Environmental Monitoring Systems offer unattended sound monitoring with cloud access to data and notifications.
Remote vibration and dust measurement systems from Syscom ROCK and Sonitus can be rented as standalone systems with remote access or incorporated into EMS sound-monitoring solutions. For locating noise sources or investigating leaks, the CAE SoundCam 3 acoustic camera is also listed. A miniature 1/4-inch microphone and preamplifier combination is available for field acoustic situations including free-field, diffuse-field and pressure measurements.
These options allow teams to consider sound, vibration and dust as related parts of an environmental monitoring plan. The right configuration depends on what must be measured, whether monitoring is attended or unattended, and how data needs to be accessed.
Additional tools for excitation and pressure testing
For structural and modal work, larger K2500E500 and K2500E-HT shaker kits are listed for testing up to 500 lbf (2,224 N peak force), with a matching 288M34 impedance head. A 2000X15 Modal-Pod fixture accessory for the 2500E shaker is designed for standardized testing of 1U, 2U and 3U CubeSats.
Dynamic pressure options have also expanded, including additional PCB 113 Series high-frequency transducers and 137 Series free-field blast pencil probes. The Hi-Techniques Echelon Series is a ruggedized data acquisition system listed at 1 Ms/s for ultra-high-frequency pressure and shock or pyroshock testing in laboratory or field settings.
Plan the rental around the test
Equipment selection and logistics both affect readiness. The rental program generally has minimum periods of seven or 15 days, depending on the product; longer initial periods have lower daily rates, and long-term rentals may be available. Rental equipment is functionally checked before shipment and after return. Where applicable, units arrive with NIST-traceable calibration certificates. The renter remains responsible for setting calibration intervals according to its own quality-system requirements.
Allow time for equipment preparation and testing: two to three days is typically requested, with larger systems potentially taking longer. A signed rental agreement is required before shipment. North American rental periods begin the calendar day after equipment leaves The Modal Shop and end when it is received back; international rental periods begin on receipt and end when returned to The Modal Shop or its distributor.
Practical implications for automation teams
The March 2026 updates offer more ways to configure temporary measurement systems for industrial troubleshooting, qualification and monitoring. Start with the measurement objective, then check sensor range, frequency response, mounting, electrical isolation and environmental suitability. For sound or remote monitoring, also define whether unattended operation and remote data access are needed. Confirming those requirements early helps align the rental equipment, accessories and schedule with the test plan.