Access Official Technical PDF

Share Summary:LinkedInEmail

Large wind farms can contain many turbines, each with mechanical components, a doubly-fed induction generator (DFIG), power converters, filters, and control systems. Representing every turbine individually can make power-system dynamic studies computationally demanding. A wind farm aggregate model offers a way to represent the farm with a single equivalent turbine while retaining the nonlinear electromechanical dynamics of the individual units—provided the farm fits a defined set of assumptions.

The reduced-order approach discussed here is designed for identical, parallel-connected Type-3 wind turbines experiencing the same wind speed. Its central idea is structure preservation: scale selected turbine parameters according to the number of units so that the aggregate model follows the behavior of the full collection. The result has the same state dimension as one turbine, rather than a separate set of states for every turbine.

Why aggregate wind farm dynamics?

Wind farm models are used to examine how generation assets interact dynamically with the bulk power system. A simplified representation that treats a farm only as a current injection may omit the turbine and converter dynamics needed to study electrical or mechanical behavior. Modeling each turbine in full detail retains those dynamics, but increases the size of the system being simulated.

The aggregate model aims to address both needs: preserve the key dynamics represented in the individual-turbine model and reduce the number of modeled states. For the Type-3 turbine considered, the individual model has 27 states. The aggregate model also has 27 states, regardless of the number of turbines represented.

What the Type-3 turbine model includes

The single-turbine model combines subsystems that convert wind energy into electrical power and regulate its delivery to the grid:

  • Aerodynamic and drivetrain dynamics: A turbine performance model relates wind speed, rotor speed, blade-pitch angle, and aerodynamic torque. A two-mass drivetrain represents turbine and generator speeds, along with shaft twist.
  • DFIG dynamics: The doubly-fed induction generator model represents stator currents and rotor transient voltages, and supports calculation of electromagnetic torque and electrical power.
  • Rotor-side converter: Its controllers regulate reactive power and electromagnetic torque, with current control generating rotor-voltage references.
  • Grid-side converter and filter: A phase-locked loop synchronizes the model with the grid. An LCL filter and associated controllers represent the converter’s electrical interface and power regulation.
  • DC-link capacitor: Its energy state captures the balance between rotor-side power and filtered grid-side power.

Keeping these nonlinearities matters because turbine behavior depends on operating conditions, including wind speed. A model linearized around a fixed condition may not represent the same dynamics as wind conditions change.

How the wind farm aggregate model works

For a collection of N identical turbines connected in parallel, the aggregate representation scales selected mechanical, electrical, and control parameters. It also scales the reactive-power input and the current- and power-related states. In broad terms, aggregate currents and power-related quantities are N times their single-turbine counterparts, while turbine speeds, relevant voltages, and phase-locked-loop states remain the same.

This scaling reflects the parallel connection: the turbines share the same terminal voltage, while their contributions to current and power add. Mechanical parameters are also scaled so the single equivalent turbine represents the combined farm. The aggregate is therefore a mathematical equivalent, not a claim that the farm physically contains one larger turbine.

The model’s stated equivalence depends on matching initial conditions and inputs as well as parameter scaling. In the analyzed setup, turbines have identical parameters, experience the same incident wind speed, and use the same zero reactive-power setpoint for their rotor-side converters. Under these conditions, the aggregate model reproduces the collection’s input-output behavior over time.

Validation and computational implications

Numerical simulations compared one aggregate model for eight turbines with eight instances of the individual-turbine model. The simulations applied a changing wind-speed profile and a step change in grid voltage. The results showed the expected relationships: turbine and generator speeds and voltages aligned, while aggregate currents and powers reflected the eight-turbine scaling.

In the reported simulation environment, running the eight individual models took 75.38 seconds, compared with 9.42 seconds for the aggregate model. These figures describe that particular simulation, rather than a universal runtime guarantee. The broader benefit is structural: one 27-state model can replace repeated copies of the 27-state turbine model when the assumptions for aggregation hold.

For engineers and system integrators, this can make it more practical to include turbine and converter dynamics in farm-level power-system studies. The model can support investigation of interactions involving both electrical and mechanical behavior without requiring a full set of states for every identical turbine.

Assumptions and possible extensions

The equivalence should not be applied without checking how a real wind farm differs from the modeled arrangement. The approach abstracts away variation in wind speeds across turbines, differences in turbine hardware or control parameters, and impedances within the farm’s electrical distribution network. Those conditions can affect whether one aggregate unit adequately represents farm behavior.

The model also provides a basis for further extensions. For example, combining turbine electromechanical dynamics with wake models could help represent how aerodynamic interactions and changing energy extraction affect farm power production over time. Time-scale separation may also be used to focus on faster electrical or slower mechanical phenomena, though that involves an additional modeling reduction.

Practical takeaway

A structure-preserving wind farm aggregate model can reduce simulation complexity without discarding the nonlinear turbine, generator, and converter dynamics represented in the individual model. Its value depends on matching the model’s assumptions: identical parallel-connected Type-3 turbines, common wind input, and compatible initial conditions and control setpoints. For farms that meet those conditions, parameter scaling offers a rigorous route to a compact equivalent model for dynamic power-system analysis. Where wind, hardware, controls, or network connections vary, those differences need to be considered before relying on a single equivalent turbine.

Access Official Technical PDF

About The Author