Wireless communication above 100 GHz is being explored for more than faster data transfer. The sub-THz and terahertz (THz) bands offer wide swaths of spectrum and short wavelengths that could support high-capacity links, environmental sensing, imaging and precise positioning. For industrial automation, these capabilities suggest ways to connect machines and move data-intensive applications closer to real time. But turning that potential into practical systems requires careful attention to propagation, radio hardware, antenna arrays and power consumption.
Why consider wireless communication above 100 GHz?
As wireless systems support more devices and demanding applications, spectrum below 6 GHz alone may not meet every future capacity requirement. Millimeter-wave systems already make use of higher frequencies, while moving above 100 GHz opens access to even broader bandwidths. The research describes 100 GHz to 3 THz as the THz band, while noting that the 100–300 GHz range is also commonly called sub-THz.
Wide bandwidth can enable very high data rates without requiring extremely high spectral efficiency. Short wavelengths also allow many antenna elements to fit into a small physical area. With suitable arrays, systems can form narrow, directional beams and exploit spatial multiplexing. Potential applications discussed include wireless backhaul and fronthaul, high-speed data distribution, robotic control, and links that move substantial computing tasks to a remote base station or edge server.
For automation teams, the important point is not that every control link needs the highest possible throughput. Rather, these bands may offer options for applications that combine substantial data transfer with sensing or imaging. Their suitability will depend on the link distance, environment, required availability and the capabilities of the equipment.
Terahertz wireless for sensing and imaging
Above 100 GHz, a wireless signal can provide information about its surroundings as well as carry data. Sensing methods can examine how a signal changes after interacting with materials, while frequency-selective absorption and resonances may help distinguish certain materials or substances. The source identifies possible uses including gas sensing, air-quality detection, security scanning and personal monitoring; these are research opportunities, not guarantees of performance in a particular deployment.
Imaging is another promising application. Wide bandwidth and short wavelengths can support fine spatial resolution, while beam scanning can collect measurements from different angles to build a picture of an environment. THz signals may also reflect from building surfaces, creating paths that could help reveal objects outside a direct line of sight. Interpreting those reflections is important: multiple bounces can distort an image, even when the reflected signal provides useful information about hidden areas.
These concepts could be relevant wherever automation requires more than a conventional communications link—for example, when a system must combine data exchange with mapping or environmental observation. However, the article’s findings describe developing techniques; they do not establish that THz imaging is a drop-in replacement for existing industrial sensors.
Positioning beyond a line of sight
Large bandwidths can help systems estimate signal timing, while antenna arrays can estimate the direction from which a signal arrives. Combining time-of-arrival and angle-of-arrival measurements with an image or map of the surroundings offers a way to estimate device location, including in some non-line-of-sight conditions.
The research reports an experimental demonstration in which an imaging-and-communication method localized a user within a 2 cm radius over 2.8 m, despite a path involving two reflections. This illustrates a possible approach, not a general accuracy specification for commercial equipment. The broader implication is that communication, imaging and positioning might share measurements and infrastructure rather than operate as entirely separate functions.
Engineering challenges: propagation and hardware
Atmospheric loss and directional links
Propagation above 100 GHz is frequency-dependent. Atmospheric gases absorb energy strongly at certain bands, including around 183, 325, 380, 450, 550 and 760 GHz, adding loss beyond free-space propagation. Those bands may suit very short-range links, while other regions can have substantially lower atmospheric absorption. Link planning therefore needs to account for operating frequency and distance rather than treating the THz band as a single, uniform channel.
Directional antenna arrays can help compensate for path loss because antenna gain rises with frequency for a fixed physical aperture. Narrow beams, however, make alignment and channel knowledge important. A narrow beam also does not guarantee protection from interception; the research notes that physical-layer security measures remain necessary.
Transceiver efficiency and array processing
Radio-frequency components become more difficult to implement as operating frequency rises. The cited research highlights limitations in amplifier output power, efficiency, noise and linearity, alongside phase noise and the physical challenge of placing electronics behind densely spaced antenna elements.
One proposed response is spatial oversampling combined with noise shaping. In this approach, an array uses closely spaced elements and processes signals so that much of the noise and distortion falls outside the region occupied by propagating waves. The authors describe potential improvements to receiver noise, linearity and effective converter resolution, while noting that mutual coupling limits the benefits as element spacing becomes very small. This is a research direction, not a universal design recipe.
Wideband beam steering presents another design choice. Conventional phase-based steering can experience beam squint across wide bandwidths, whereas true-time-delay beamformers can maintain frequency-independent beam direction. Their computational complexity and power use remain important implementation considerations.
What this means for industrial automation
Wireless communication above 100 GHz could eventually support high-capacity links alongside sensing, imaging and positioning functions. For automation decision-makers, the practical task is to match each potential use to its operating conditions: required data rate, link range, obstructions, frequency-dependent atmospheric loss, beam alignment and available power. Equipment must also meet the demands of the intended environment, which the research does not specify.
The technology’s promise rests on more than abundant spectrum. It depends on progress in transceivers, antenna arrays, signal processing, channel modeling and system integration. Treating propagation and hardware constraints as core design inputs—not afterthoughts—will be essential when evaluating whether a sub-THz or THz link is appropriate for a particular application.
Conclusion
Frequencies above 100 GHz offer a compelling combination of bandwidth, compact arrays and potential sensing capability. They could enable high-speed wireless links, detailed imaging and precise positioning, including in some non-line-of-sight scenarios. At the same time, atmospheric absorption, directional beam management, transceiver limitations and power-efficient processing remain significant engineering challenges. Industrial teams should view these bands as an emerging set of communication and sensing options whose value will depend on the requirements and conditions of each deployment.