Access Official Technical PDF

Share Summary:LinkedInEmail

WSe2 quantum emitters offer a route to nanoscale single-photon sources, but placing emitters at predictable locations and integrating them with optical structures remain important engineering challenges. A demonstrated approach uses patterned gold nanopillars beneath a WSe2 monolayer to address both: the structures locally strain the atomically thin material, helping form emitters at defined sites, while also supporting plasmonic resonances that interact with the emitted light.

The results show regularly positioned emission sites, evidence of single-photon emission, and polarization behavior linked to nanopillar geometry. Together, these findings illustrate how a single patterned surface can serve as both an emitter-positioning template and an optical resonator.

Why position control matters for quantum photonics

Solid-state quantum emitters are considered building blocks for applications such as single-photon sources, spin-photon interfaces, quantum sensing and quantum information systems. For practical device architectures, however, finding an emitter is not enough: it must also be positioned and coupled to a suitable photonic structure.

In atomically thin semiconductors such as WSe2, localized emission can arise where excitons—bound pairs of electrons and holes—are confined. Local strain can create these confinement sites. Patterning the surface before transferring the monolayer provides a way to encourage emitters to form at selected positions rather than relying only on naturally occurring or randomly located sites.

Plasmonic structures add another function. Their resonances can concentrate optical fields near a metal surface, creating conditions for enhanced interaction between light and a nearby emitter. Combining strain-based localization with plasmonic coupling therefore brings emitter formation and optical control into the same nanoscale design.

How nanopillars define emitter locations

The demonstrated structures were fabricated on a silicon substrate topped with a 200-nanometer silicon dioxide layer. Electron-beam lithography defined rectangular features, followed by deposition and lift-off of an 80-nanometer gold layer. The resulting nanopillars ranged from 20 to 240 nanometers in size and were arranged in arrays with micrometer-scale spacing. Some samples also received a thin, 5-nanometer aluminum oxide coating.

Exfoliated WSe2 monolayers were then transferred onto the patterned surfaces. The layer conformed to the topography: some pillars pierced it, while many locally strained it into a tent-like shape. This deformation is important because strain can confine excitons and create sharply localized emission centers near the patterned features.

Spatially resolved photoluminescence measurements found bright emission sites arranged in a regular pattern that matched the nanopillar positions. The researchers also observed narrow emission lines below the energy of the WSe2 free exciton, consistent with tightly localized excitons. At pillar locations, luminescence was up to 100% higher than at off-pillar positions, an observation associated with resonant optical coupling to plasmonic modes.

Evidence of single-photon emission and optical control

To test whether an individual localized emitter produced single photons, the researchers measured its second-order intensity correlation using a Hanbury Brown and Twiss setup. The measured value at zero time delay was g2(0) = 0.17 ± 0.15. The pronounced antibunching signal supports the identification of the selected emission feature as a single-photon source.

The emission also showed a strong linear polarization. Measurements on rectangular pillars oriented at right angles found that emitter polarization corresponded closely to each pillar’s long axis. This behavior is consistent with coupling to plasmonic excitations that are stronger along the extended direction of the rod-like structure. The way the monolayer bends around a pillar can also affect the observed polarization.

These observations suggest that pillar dimensions and orientation can be used to influence optical behavior, rather than treating the metal structure solely as a support for the monolayer. In this design, geometry helps determine both where localized emission occurs and how that emission is polarized.

What simulations reveal about plasmonic coupling

Finite-difference time-domain simulations examined square and rod-like pillars. For a 140-by-140-nanometer square pillar, the modeled electric field was strongly enhanced at two opposing edges, with a calculated maximum enhancement of 20 relative to the incident field. The calculated plasmon resonance shifted toward shorter wavelengths as the square pillar size decreased.

For a 90-by-30-nanometer rod, the simulated response depended on incident polarization. A pronounced resonance appeared for light polarized along the rod’s long axis, while the orthogonal polarization did not show a significant resonance. This provides a physical explanation for the measured alignment between emitter polarization and pillar orientation.

The simulations help connect the experimental observations to resonator geometry. They do not, by themselves, establish a complete device performance profile; rather, they show how local fields and spectral resonances can support the observed coupling behavior.

Practical implications for integrated quantum devices

For engineers working on quantum photonic architectures, the key design idea is multifunctional patterning: a metal feature can help define the location of an emitter while also acting as a plasmonic cavity. Regular arrays offer a framework for arranging these coupled components, and elongated features provide a means of introducing directional polarization behavior.

The reported work is an important step toward scalable emitter-resonator systems, not a demonstration that all manufacturing or integration challenges have been solved. The observed pillar-to-pillar variation, including whether a feature pierces or strains the monolayer, underscores the need to control material transfer and local geometry when developing reproducible structures.

Overall, patterned gold nanopillars show how strain engineering and plasmonics can be combined to position WSe2 quantum emitters and shape their interaction with light. Confirmed single-photon emission and geometry-linked polarization make this approach relevant to the development of integrated quantum photonic devices, where predictable emitter placement and controlled optical coupling are central design requirements.

Access Official Technical PDF

About The Author