A 12V dual power supply system can add energy-management functions to a conventional vehicle architecture while keeping a low-voltage electrical system. In a mild hybrid or micro hybrid application, it coordinates a lead-acid battery, a separate energy-storage device, a DC-DC converter and switching devices. The goal is to manage engine starting, auxiliary loads and stored energy according to vehicle operating conditions, while supporting fuel-efficiency improvements.
Why use a dual power supply system?
Fuel-consumption and CO2-emission requirements have encouraged automakers to consider electrification alongside improvements to combustion engines. Full hybrid and electric-vehicle architectures can deliver substantial fuel-consumption benefits, but require high-voltage designs and their associated system costs. A low-voltage dual power supply can offer another approach: it is designed to be added to a conventional vehicle and supports engine assistance without making the vehicle capable of electric-only driving.
The approach builds on the needs of start-stop operation. When an engine shuts down at a stop, it must restart promptly, while lighting, navigation and other auxiliary equipment continue to require power. Relying on one battery for both engine starting and accessories can create competing demands; a voltage drop during starting, for example, may affect auxiliary equipment. A second energy-storage device allows power to be managed according to the task.
How a 12V dual power supply system works
A typical system comprises a lead-acid battery, a storage device such as a lithium-ion battery (LiB) or electric double-layer capacitor (EDLC), a semiconductor relay and a DC-DC converter. The relay changes the electrical connections, while the converter adjusts voltage between the lead-acid battery and the storage device. This matters because the storage device’s output voltage varies with its charging condition.
When the LiB voltage is higher than the lead-acid battery voltage, the converter can step it down to supply the required auxiliary voltage. This helps direct current to accessories rather than allowing unnecessary current to flow from the LiB. When the LiB has less remaining capacity and its voltage is lower, the converter can step the voltage up. The system can therefore make use of stored energy across changing battery conditions.
In a mild hybrid configuration, an integrated starter generator (ISG) combines generator and motor functions. It can recover energy during deceleration and use stored electrical energy to assist the engine. Unlike a regenerative-braking-only arrangement, which captures deceleration energy to reduce generator load on the engine, the mild hybrid system can also drive the ISG to provide engine assistance.
Coordinating power with vehicle operating state
The control strategy changes the relay and converter states as driving conditions change. The principal operating modes described for this type of system are:
- Parking and initial start: The lead-acid battery supplies the starter motor, supporting engine starting, including under low-temperature conditions.
- Normal driving: The LiB supplies only the current needed by auxiliary equipment through the DC-DC converter. This limits the load placed on the lead-acid battery and the engine-driven generation system.
- Deceleration: The ISG is connected to the storage system to maximize charging from recovered energy.
- Idling stop: The engine is stopped when appropriate, while the LiB and converter continue supplying the auxiliary load.
- Restart: The ISG restarts the engine using LiB power. Separating the lead-acid battery side helps prevent its voltage from dropping during the restart.
- Acceleration: The ISG assists the engine using stored energy, while the converter continues to supply auxiliary equipment.
These modes illustrate why the system depends on coordinated control rather than simply adding another battery. Switching and voltage conversion must follow vehicle state so that starting, accessory supply, energy recovery and engine assistance can be handled appropriately.
Digital DC-DC conversion for higher-current designs
In a conventional analog DC-DC converter, voltage and current feedback are processed as analog signals to determine switching timing. A digital design instead uses a microcomputer to process control information and command the converter’s power switches. One practical distinction is how changes are implemented: adjusting an analog control design can require changes to the IC or circuit, while a digital controller can accommodate control changes through software.
Digital control can also support multiphase conversion. Rather than building one converter circuit to handle the entire output current, several smaller converter circuits can operate in parallel with phase-shifted switching. This can distribute current and reduce losses, heat generation and ripple-current demands compared with concentrating the load in one circuit. The number of phases involves trade-offs in component cost and physical size, so the appropriate arrangement depends on design priorities.
Other techniques under consideration include selecting MOSFETs according to their switching and on-resistance characteristics for step-up or step-down operation, and soft switching to reduce overlap between device voltage and current during switching. These approaches aim to reduce converter losses and associated heat. Their implementation requires suitable control logic and careful attention to the converter’s operating conditions.
Why use semiconductor relays?
Frequent switching can make mechanical relay wear a concern. Mechanical devices have moving parts and contacts that can deteriorate through friction and electrical arcing; they can also be relatively large and heavy in high-current applications. A semiconductor relay uses switching devices such as MOSFETs instead of mechanical contacts, avoiding physical contact wear and enabling a smaller, lighter assembly.
Semiconductor switching still requires careful management. Turning off a large current can generate a voltage surge. One approach described for limiting that surge is to extend the transition duration, reducing the rate of current change. The design must balance surge control against switching losses and keep operation within the semiconductor’s safe operating area.
When MOSFETs are connected in parallel, differences in their turn-off threshold voltages can also affect current sharing. If one device turns off before another, the remaining device may briefly carry more current than intended. Measuring device characteristics and adjusting the controller’s turn-off timing can help compensate for those differences.
Practical implications for system design
A dual power supply architecture brings together energy storage, conversion and switching to manage distinct vehicle loads and operating states. For engineers and integrators, the central design consideration is the interaction among these elements: battery voltage changes, auxiliary demand, ISG operation and relay timing all influence how power is routed.
Digital DC-DC control and semiconductor relays provide design options for managing higher currents and frequent switching, but they also introduce control, thermal and protection considerations. A carefully coordinated 12V dual power supply system can support start-stop functions, regenerative energy use and engine assistance while retaining a low-voltage basis. Its practical value depends on matching the power electronics and control strategy to the vehicle’s operating requirements.