Access Official Technical PDF

Share Summary:LinkedInEmail

3D printed batteries offer a way to design energy storage alongside the products they power, rather than adapting product layouts to standard cell shapes. For industrial automation engineers and product teams, the opportunity is not simply to print a battery in a custom form. The printing method, feed material and device architecture must work together to meet electrical, mechanical and chemical requirements.

Additive manufacturing builds structures layer by layer from a computer-aided design (CAD) model. Applied to batteries and supercapacitors, it can support complex electrode geometries, integrated components and compact formats for devices with limited space. However, a printable material is not automatically a useful energy-storage material: conductivity, porosity, electrolyte compatibility and interface quality all affect how a finished device performs.

Why consider additive manufacturing for energy storage?

Conventional batteries and supercapacitors are generally available in established shapes, such as cylindrical, prismatic and coin cells. Additive manufacturing could make it possible to develop alternative geometries as part of the product design process. This is relevant to small or low-power applications, including sensors, connected devices and wearable or healthcare technologies, where integrating the power source into the product may be valuable.

CAD-based design also makes complex structures easier to specify than they may be with conventional assembly approaches. In principle, electrodes, current collectors, electrolytes and casings can be designed as parts of a coordinated device. Multi-material printing may help create those structures, although a single printing process may not suit every component. A multi-printer workflow may be more appropriate when different materials require different fabrication conditions.

3D printing methods for batteries and supercapacitors

Printing processes differ in their feed materials, how they form each layer, and the resolution, speed and material options they can provide. These distinctions matter when selecting a process for a particular cell component.

  • Material extrusion deposits material through a nozzle, using either a filament or a liquid feed. Fused filament fabrication and direct ink writing are examples. The process can be accessible and adaptable to composites, but printed parts may have rough surfaces, pores and direction-dependent properties.
  • Material jetting deposits droplets of liquid ink. Inkjet approaches can place different materials in defined patterns, which can support interdigitated electrode layouts. The ink’s properties must allow stable droplet formation and deposition.
  • Vat photopolymerization uses light to cure liquid resin in successive layers. Stereolithography and digital light processing can produce detailed, comparatively uniform structures. Printing multiple resins can be challenging because each material may require a separate vat and additional handling.
  • Powder-based methods fuse powder with a laser or electron beam, or bind powder using a liquid binder. A powder bed can support complex shapes during fabrication, but porosity may require additional processing or material infiltration.

No process is best across all measures. Resolution, build speed, build volume, porosity and multi-material capability must be considered alongside the properties of the intended device.

Match materials to the role of each component

Conductive structures and casings

Current collectors provide an electronic pathway where an electrode’s active material does not conduct well enough on its own. Printed metal structures can offer conductive, mechanically robust geometries, but metal additive manufacturing may require demanding processing conditions and costly equipment. An alternative is to add metal particles or conductive carbon to a polymer. The loading must be high enough to form conductive pathways without making the composite too brittle or difficult to print.

Carbon materials, including graphite, graphene-based materials, carbon nanotubes and activated carbon, are used in printable conductive formulations. Their performance depends on dispersion, loading and the structure of the printed part. Abrasive fillers can also wear printer nozzles. Extrusion-printed composites may be anisotropic: conductivity can differ by direction because electrical pathways and layer bonding are not identical throughout the part.

Casings have different needs from electrodes. A battery enclosure may need to be airtight, nonporous and resistant to the electrolyte and operating environment. An electrode, by contrast, may benefit from accessible surface area and porosity. Selecting one process or material for both roles can therefore create a design conflict.

Electrolytes and separators

Electrolytes transport ions between electrodes, while separators help prevent electrical contact in cells that use liquid electrolyte. Low-viscosity liquid electrolytes are generally introduced after printing rather than printed as three-dimensional structures. Solid and gel electrolytes are more suitable candidates for direct printing and can, in some designs, also serve as separators.

Electrolyte selection depends on the device. Aqueous gels can be processable and conductive, but water limits their operating voltage and makes them unsuitable for some high-voltage battery systems. Organic gel electrolytes can support wider voltage windows, while ionic-liquid-based gels offer properties such as low volatility and nonflammability. For every formulation, compatibility with printer components and electrode materials must be considered. Solid electrolytes may improve mechanical stability, but their contact with electrodes is important because interfacial resistance can affect cell operation.

Electrode geometry and performance trade-offs

Three-dimensional and porous electrodes can increase the interface between active material and electrolyte and provide shorter pathways for ion transport. Common layouts include stacked, sandwich-type layers and in-plane interdigitated arrangements. In-plane designs can support compact integration, but require a process capable of placing different materials accurately within the same plane.

Polymer-based filaments illustrate a central trade-off. Adding more graphite or active material can improve electronic conductivity or increase active-material content, yet high filler loading may make a filament brittle. The polymer can also isolate particles from one another and restrict ion access to material inside the printed structure. These limitations can reduce usable capacity and rate performance. Increasing porosity or using a different printing process may help, but greater electrode surface area can also increase contact with the electrolyte and contribute to unwanted reactions during battery cycling.

Material jetting can deposit active-material inks directly, avoiding some insulating-polymer limitations associated with filament composites. Extrusion, however, can be suited to building multiple device components in sequence. Photopolymerization offers another route where fine feature definition and uniform interfaces are priorities, though material selection and multi-material processing remain important constraints.

Practical implications for design teams

Before choosing a process, define the required function of each printed part. A useful design review should consider:

  • Whether the component needs to be conductive, ionically conductive, insulating or structurally protective.
  • How much porosity is beneficial, and where it could compromise sealing or mechanical integrity.
  • Whether the process can print the required materials and geometry, including any multi-material interfaces.
  • How the feed material’s rheology, filler loading and solvent compatibility affect print quality and device stability.
  • Whether layer orientation and contact between components could introduce anisotropy or interfacial resistance.

3D printed batteries and supercapacitors are best approached as co-designed systems: device architecture, material formulation and printing process must be developed together. Additive manufacturing can enable alternative form factors and intricate electrode structures, but practical performance depends on resolving trade-offs between conductivity, printability, porosity, durability and electrolyte compatibility. Matching each component to a suitable process is the essential step toward useful, product-integrated energy storage.

Access Official Technical PDF

About The Author