Access Official Technical PDF

Share Summary:LinkedInEmail

3D-printed flexible supercapacitors bring additive manufacturing into the design of compact energy storage devices. For industrial automation engineers and product developers, the approach is notable because it can deposit functional materials in defined patterns without relying on separate masks or extensive substrate preparation. Research into printed electric double-layer capacitors (EDLCs) demonstrates both the potential of this method and the practical trade-offs involved in developing a flexible device.

An EDLC stores charge through the separation of ions at the interface between an electrode and an electrolyte. Compared with batteries, supercapacitors are suited to applications that need rapid charge and discharge or high power delivery, although EDLCs generally have lower energy density. Flexibility adds another design requirement: the substrate, current collectors, electrodes and electrolyte must work together while the device is bent.

Why use 3D printing for flexible supercapacitors?

Conventional fabrication routes for flexible capacitors may involve coating, spraying, screen printing or roll-to-roll processing. Some methods require patterned masks or surface treatments to improve adhesion. These steps can complicate prototyping, particularly when a design calls for multiple materials or a non-flat structure.

Additive manufacturing builds a part from digital design data, depositing material layer by layer. In the reported work, a modified 3D printing process was used to deposit electrode pastes and gel electrolyte, with fused deposition modelling also used in some designs to form a flexible supporting structure. Paste extrusion is especially relevant because activated carbon mixtures are too viscous for some printing methods, such as inkjet printing.

The aim is not simply to print a finished device in one operation. The process must place each material accurately, maintain separation between electrodes and produce layers that adhere to one another. Paste flow, print paths and layer thickness all affect whether the deposited structure is consistent enough for testing.

Key materials and design considerations

Activated carbon electrodes

Activated carbon (AC) is used as the active electrode material in the EDLC designs. Its high surface area supports ion adsorption, while its powder form can be prepared as a printable paste. The research included milling the AC powder to improve paste deposition and examine its effect on electrochemical behaviour. The paste must be formulated and deposited so it can form a usable electrode without compromising the flexibility of the finished device.

Current collectors and substrate

Current collectors conduct charge to and from the electrodes. Their conductivity, adhesion and mechanical properties matter, particularly when the device is intended to bend. A flexible substrate provides structural support, but it must also be compatible with the deposited materials. This makes material selection a system-level decision: a printable electrode is not sufficient if it separates from its support or cannot maintain electrical contact.

Gel electrolyte and electrode separation

The electrolyte enables ion movement between the electrodes, while also helping prevent an electrical short circuit. In the designs described, a polymer gel electrolyte was used. Its thickness and composition influence the distance between electrodes and the movement of ions, so they must be considered alongside electrode thickness. A thicker layer may affect device dimensions and electrochemical response; a thinner one must still provide reliable separation.

Print structure influences device performance

Print geometry can affect both mechanical flexibility and the amount of active material in a device. The work explored different deposition strategies, including dual extrusion and a single paste-extrusion process, as well as designed infill structures. A single-process approach can reduce reliance on a separate thermoplastic support, while a dual-head setup allows different material types to be deposited as part of the build.

There is no single print setting that can be selected independently of the material. Extrusion behaviour, layer height, path layout and the geometry of the supporting structure need to be matched to the paste and the intended device. Design changes can therefore have consequences beyond appearance: they may alter material use, electrode contact and the way a printed capacitor responds when bent.

Electrical configuration is another design lever. Individual EDLCs can be connected in series or parallel to change the combined circuit behaviour. The research tested these arrangements, illustrating that a printed device can be considered as part of a larger energy-storage assembly rather than only as a standalone component.

Testing printed EDLCs

Electrochemical measurements provide complementary views of performance. Cyclic voltammetry examines the current response as voltage is swept, galvanostatic charge-discharge measures voltage change under a set current, and electrochemical impedance spectroscopy helps assess electrical resistance and related response. Mechanical bending tests then examine whether the device retains electrochemical behaviour under deformation.

One reported AC-based device achieved an area-specific capacitance of 1.48 F/cm² at a scan rate of 20 mV/s. The flexible EDLC had a coulombic efficiency of 59.91%, and cycling stability was reported as 56% after 500 cycles. These are results for the tested design and conditions, not universal benchmarks for 3D-printed capacitors. They show why device evaluation should include multiple measures: a capacitance result alone does not describe charge-discharge efficiency, cycle retention or performance while bent.

Practical implications for engineering teams

For engineers considering printed energy storage, the central lesson is to develop the material system and print process together. A useful development workflow should account for:

  • Material compatibility: confirm that the substrate, current collector, AC paste and gel electrolyte can be integrated in the intended build.
  • Deposition control: tune extrusion and layer parameters for consistent material placement and electrode separation.
  • Structural design: assess how the chosen geometry balances flexibility with electrical and mechanical continuity.
  • Representative testing: evaluate electrochemical performance, cycling and bending rather than relying on a single measurement.

3D printing provides a route to prototyping flexible EDLC architectures and depositing multiple functional materials with controlled geometry. The reported results indicate that printed devices can retain electrochemical performance during bending, while also revealing the importance of efficiency and cycle stability. For industrial automation and electronics teams, the practical opportunity is design flexibility; realizing it depends on careful coordination of materials, process parameters and validation.

Access Official Technical PDF

About The Author