An automotive picture generation unit (PGU) is a core element in a head-up display development setup: it creates the image that the HUD optics present to the driver. The DLP3030PGUQ1EVM from Texas Instruments is an evaluation module built around the DLP3030-Q1 chipset, designed to support development of wide-field-of-view automotive HUDs and evaluation with existing HUD designs. Its integrated PGU, diffuser screen, optics, and LED light sources provide a platform for assessing display behavior and configuration.
For automation and electronics teams evaluating display subsystems, the EVM also illustrates a practical integration workflow: connect the display hardware, provide an appropriate supply and HDMI signal, then use a USB-to-SPI control path to adjust supported settings.
What the DLP3030-Q1 EVM provides
The EVM accepts video over HDMI and operates from a nominal 12-V supply. Its specified battery input range is 6 to 18 V. The documented performance specifications include WVGA resolution of 864 × 480, more than 70 PGU lumens, a contrast ratio greater than 1,000:1 (FoFo), a 125% NTSC color gamut, and a dimming range greater than 5,000:1. The system specifications were calibrated at 25°C with a 12-V battery input, so those conditions matter when interpreting the figures.
Power consumption depends on operating conditions. The guide lists a nominal value of 5.6 W and a range from 2 W to 13.9 W for the stated RGB LED operating condition. With the LEDs off, power consumption drops to 1.44 W. The specified ambient operating and storage temperature ranges are both −40°C to 105°C.
Automotive picture generation unit setup and assembly
Before assembly, prepare an M3 Allen wrench, an M4 Allen wrench, a Phillips screwdriver, and a 12-V, 3-A power supply. The kit includes the DMD interface and formatter controller boards, the PGU, ribbon cables, LED power and thermistor wiring, a photodiode cable, a Cheetah USB-to-SPI adapter and cable, an HDMI cable, and mounting screws.
Begin by connecting the DMD ribbon cable between the DMD interface board and formatter board. Lift the connector latch, insert the cable evenly across the connector, and clamp the latch to secure it. Then connect the LED power cable, LED thermistor cable, and photodiode cable to their corresponding formatter-board connectors.
Correct cable placement is important: the guide warns that installing the LED power and thermistor cables in the wrong connectors may damage the LEDs. At the PGU end, connect each LED cable to its matching color—red to red, green to green, and blue to blue—and attach the photodiode cable near the red LED. Complete the hardware connections with the HDMI cable and power input cable.
Power-up and video input
Use a 12-V, 3-A supply for the documented first-power-up procedure. With the supply off, connect the power cable’s red lead to V+ and its black lead to V−, then turn on the supply. A green indicator on the formatter board signals that the system is powered, and the connected computer should detect an additional display named DLP_WVGA.
If the computer mirrors its image on both the EVM and its monitor, change the external display setting to “Extend.” Once the HDMI connection is active, the EVM can display video content. The default external input resolution at power-up is 864 × 480. ACP Lite also supports a list of other external resolutions, as well as internal splash images and test patterns.
Configuring display behavior with ACP Lite
The Automotive Control Program (ACP) Lite provides settings for brightness or dimming, image orientation, and display mode. Control communication uses the Cheetah USB-to-SPI adapter: connect the adapter to the PC by USB and connect its SPI cable to the formatter board. The HDMI cable carries video; the SPI connection provides access to configuration controls.
ACP Lite and the Cheetah drivers must be installed for this control workflow. The setup process also requires the Cheetah library file, cheetah.dll, to be placed in the ACP Lite installation directory. The guide notes that the Cheetah drivers and library are obtained from Total Phase rather than distributed by TI, and that an account is required to download the software.
After connecting in ACP Lite, select the Dimming and Display Mode page. From there, choose an external video resolution, internal splash image, or test pattern. Brightness is adjusted through the Backlight parameter, which accepts values from 0 to 65535; the guide recommends a range of 700 to 1000 for indoor settings. These are configuration recommendations for the EVM, not universal settings for every HUD installation.
Practical considerations for evaluation
The EVM brings several interfaces and subsystems together, so careful setup is as important as software configuration. Verify ribbon-cable alignment and connector latches, confirm the LED and thermistor cable positions, and observe the specified input-voltage range. For system control or board-level integration, the module also exposes connections including SPI, photodiode, LED power, LED thermistor, and MCU JTAG.
As with any evaluation hardware, its documented characteristics describe the module under stated conditions; they do not by themselves establish suitability for a finished vehicle or a particular application. Application-level design, testing, safeguards, and regulatory compliance remain the responsibility of the team integrating the technology.
Conclusion
The DLP3030-Q1 automotive picture generation unit EVM offers a defined path for evaluating a wide-field-of-view HUD display subsystem. Engineers can assess HDMI video, select supported display modes, and adjust brightness through ACP Lite, while the module’s board connections support its LED, photodiode, and control functions. Following the assembly sequence, checking the power requirements, and separating the video and SPI control paths helps make evaluation more straightforward and repeatable.