Access Official Technical PDF

Share Summary:LinkedInEmail

Military microcircuit emulation offers a way to address component obsolescence while preserving the operation of established defense systems. For industrial and defense electronics teams, the challenge is not simply to find a similar part: a replacement must meet the applicable form, fit, function, and interface requirements, and satisfy the relevant procurement and quality expectations. Emulation programs can support this work at the component or board level, helping sustain systems without requiring a redesign.

Military microcircuit emulation and lifecycle support

Diminishing manufacturing sources and material shortages (DMSMS) make it increasingly difficult to obtain certain legacy microcircuits. This is especially challenging for complex digital functions operating below +5 V and at high speeds. A component may be essential to a weapon system even after its original manufacturer has stopped producing it or the device is no longer procurable.

The Generalized Emulation of Microcircuits (GEM) program, conducted through a government-industry partnership with the Defense Logistics Agency, focuses on form, fit, function, and interface (F3I) replacements for legacy Department of Defense systems. Emulation can provide sustainment options across phases of a weapon system’s life cycle, while supporting readiness and avoiding the need for system-level redesign where a suitable replacement can meet the required specification.

Developing emulation for 3.3 V devices

As digital devices have evolved, some legacy parts have become harder to replace because their voltage and performance requirements differ from older, more common technologies. The Advanced Microcircuit Emulation (AME) program addresses this need by developing a base technology intended to support emulation designs for low-voltage components, including ASICs and programmed FPGAs that use a +3.3 V supply.

The development approach described for the program uses 0.35 µm bulk CMOS gate arrays in multiple package configurations. The planned technology parameters include five metal levels, density up to one million gates, and a stated speed of 200 ps per gate. In addition to supporting non-procurable 3.3 V devices, the gate-array platform is intended to provide a foundation for large-density SRAM implementations at 5 V or below.

This kind of development is relevant to engineers assessing long-term support for custom digital functions: the replacement technology must be designed around the device’s electrical and interface requirements, not selected solely because it is functionally similar. The AME program’s longer-term direction is to increase design complexity and reduce feature size as system needs evolve.

MIL-STD-883 testing: screening and qualification

Replacement design is only part of the sustainment process. Military-grade microcircuits are subject to defined test and quality requirements. MIL-STD-883 sets out test methods for microcircuits, covering environmental, mechanical, electrical, and procedural testing. The methods specify equipment, test setup, and measurement techniques; device-specific conditions and limits are established in the applicable acquisition or procurement document.

Not every test method applies to every device. The acquisition document identifies which tests are required and provides details such as test temperature, supply voltage, input levels, forcing current, and acceptance limits where needed. Two procedural methods have particular importance for military-quality parts:

  • Method 5004, Screening Procedures: Defines screening steps applied to individual parts. For class B devices, these include wafer-lot acceptance testing, internal and external visual inspection, temperature cycling, constant acceleration, high-temperature burn-in, percent defective allowable calculations, electrical testing at high, low, and room temperatures, and hermetic package seal testing.
  • Method 5005, Qualification and Quality Conformance Requirements: Defines quality conformance inspection (QCI) using sample groups selected from a production lot. Group tests include electrical, destructive mechanical and environmental, life, and package-related tests. Some are performed on each lot; others are conducted periodically on representative samples.

These requirements mean that emulated parts must be evaluated not only for their intended electrical behavior, but also through the screening and lot-level quality processes specified for their class and application. The source describes GEM devices as screened and certified to quality class B.

Applying emulation to B-1B sustainment

The B-1B Lancer illustrates how component obsolescence can affect established aircraft systems. The aircraft’s avionics and radar systems contain legacy microcircuits, and the GEM program has supplied replacement microcircuits for use across circuit card assemblies (CCAs) and line replaceable units (LRUs).

One example involved a 54LS193 device used on a Cover Pulse Generator CCA. The CCA contained eight of these ICs, and the next higher assembly used approximately twelve CCAs. The replacement effort began with the applicable military specification and sample units. The devices were reverse engineered to understand their behavior and requirements, including differences in performance among generic devices from different manufacturers. A production replacement was then designed and manufactured to meet the program requirements.

The reported outcome was continued sustainment without a system redesign, with the Air Force estimating $4.4 million in cost avoidance. Further replacement work was also described for a circuit card in the B-1B radar video signal processor LRU. These examples show why detailed application understanding and specification-based design are central to a replacement program.

Practical considerations for engineering teams

When evaluating an emulation path for an obsolete microcircuit, technical decision-makers should focus on several connected questions:

  • Which device specification or source control drawing governs the replacement?
  • What electrical, timing, package, and interface requirements must be preserved in the target application?
  • Which MIL-STD-883 methods and quality class requirements apply, as defined by the acquisition document?
  • What screening and quality conformance evidence is needed before parts can be accepted for production use?

Catalogs and general device references can help identify candidate parts, but they do not replace the procurement specification for a particular application. In the described program, emulated devices are targeted to specific military drawings or user specifications and shipped with a certificate of conformance.

Conclusion

Military microcircuit emulation is a practical sustainment approach when legacy components become unavailable but the surrounding system must remain in service. Low-voltage technologies such as +3.3 V gate arrays can expand the range of devices that can be considered for emulation, while MIL-STD-883 screening and quality conformance processes provide a structured basis for evaluating military-grade parts. For engineering and operations teams, successful obsolescence planning depends on matching the replacement to the actual application requirements and defining the required qualification and acceptance evidence up front.

Access Official Technical PDF

About The Author