Low-flow Coriolis mass flow meters help automation teams measure small quantities of liquids and gases without relying on fluid properties to calculate mass flow. In the mini CORI-FLOW™ range, meter and controller models cover overlapping ranges from 0.1 g/h to 300 kg/h, with certain models specified for flows as low as 0.03 g/h. The range combines direct mass measurement with options for control, batch dosing and digital integration—capabilities relevant to analytical equipment, pilot plants and process skids.
Choosing an instrument involves more than matching a nominal flow rate. Engineers also need to consider whether the application requires measurement or closed-loop control, the fluid and pressure conditions, hazardous-area classification, communication requirements and mechanical installation.
How low-flow Coriolis mass flow meters measure fluid
The instrument uses a single-loop sensor tube that forms part of an oscillating system. As fluid moves through the tube, Coriolis forces produce a phase shift. Sensors detect this change, and the instrument’s electronics use it to generate a signal proportional to the actual mass flow rate.
Because the measurement is based on mass flow, it is independent of fluid properties used by other measurement approaches. The instruments also provide density and temperature as secondary outputs. Coriolis measurement is inherently bidirectional, which can be useful where flow direction is part of the process measurement.
The sensor design is intended for low flow rates, and the range includes both meters and controllers. The compact format and small internal volume can support installations where space and fluid hold-up matter, such as dosing assemblies or analytical systems.
Multi-range calibration and model selection
Models are available across overlapping flow ranges. The stated overall range extends from 0.1 g/h to 300 kg/h, while individual model specifications vary. For example, listed options include meter ranges from 0.05–5 g/h at the low end, and an M15 meter covering 0.2–5 kg/h through 3–300 kg/h. These ranges are model-specific, so selection should be based on the required operating range rather than the family-wide maximum.
The instruments offer multi-range functionality: a factory-calibrated range can be rescaled by the user while maintaining the instrument’s original accuracy specifications. This can allow a facility to use fewer instrument variants across applications with different flow requirements. The practical benefit depends on whether the available ranges and process conditions fit the intended duties.
When specifying a model, confirm the required minimum and maximum flow, pressure rating, protection class and whether the application calls for a meter or controller. The published options include distinct pressure ratings for different models and configurations; ratings should not be assumed to apply across the entire product family.
From measurement to closed-loop flow control
For applications that need active regulation, selected models include integrated PID control and can be paired closely with control valves or pumps. The controller uses measured flow as feedback to adjust the control element, supporting fast, stable regulation in a compact assembly. Depending on the configuration, options include liquid flow controllers, gas flow controllers and meter-and-valve combinations.
Batch and filling tasks have a different control requirement: deliver a defined amount, then stop or complete the cycle. CORI-FILL™ adds an integrated batch counter and can directly control shut-off valves, proportional valves or gear pumps. Combining a Coriolis instrument with an appropriate valve or pump can create a compact dosing assembly for repetitive delivery of precursors, additives, solvents or other process fluids.
Examples of application areas identified for the range include:
- Analytical systems and pilot plants
- Additive dosing in food, beverage and pharmaceutical processes
- Petrochemical installations
- CVD and coating systems
- Semiconductor processing
Communication, hazardous areas and installation
Interface options include analog signals such as 0–5 V, 0–10 V, 0–20 mA and 4–20 mA, as well as RS232 and optional fieldbus interfaces. Listed options include PROFIBUS DP, DeviceNet, Modbus RTU/ASCII and FLOW-BUS; the ML120 series can also be equipped with EtherCAT or PROFINET. Digital functions include totalization and alarms, and configuration can be carried out through the RS232 or fieldbus interface using available software tools.
Housing and certification choices depend on where the instrument will be installed. Certain models offer an industrial housing with optional ATEX approval for Zone 2 applications. The XM12, XM13 and XM14 models are described as explosion-proof instruments for IECEx and ATEX Zone 1 hazardous areas, with approval II 2 G Ex d e IIB T6 Gb. Confirm the certification and suitability of the exact model and configuration against the area classification and project requirements.
Mechanical installation also matters at very low flow rates. To support zero stability, the instruments need to be rigidly bolted to a stiff, heavy mass or construction. Mounting blocks and vibration dampeners are available. Skid designers should therefore consider the mounting structure, nearby vibration sources and the arrangement of connected valves, pumps and piping as part of the instrument installation.
Practical implications for system design
Low-flow Coriolis instruments can bring measurement, control and dosing functions together, but those functions are not identical across all models. Start by defining the operating flow range and whether the process needs continuous control or repeatable batch delivery. Then verify pressure, materials, enclosure protection, hazardous-area requirements and communications with the selected model’s specifications.
For automation engineers and integrators, the main design opportunity is to select a configuration that fits the process without adding unnecessary instrumentation variants or control hardware. Correct range selection, appropriate mounting and a clear understanding of the required interface and control function help translate direct mass measurement into a dependable part of the process system.