Access Official Technical PDF

Share Summary:LinkedInEmail

Enclosure heaters help protect electrical, electronic, pneumatic and mechanical equipment from low temperatures, condensation and corrosion. For automation engineers and plant teams, selecting an appropriate heater means considering more than wattage: heating method, enclosure environment, available supply voltage, installation location and applicable hazardous-area requirements all matter. Understanding the differences among common enclosure heaters can help ensure the chosen approach fits the equipment and operating conditions.

Why electrical enclosures need heating

Temperature changes inside an enclosure can contribute to condensation, while low ambient temperatures can expose installed equipment to conditions it is not intended to tolerate. An enclosure heater raises or maintains the internal temperature to help address these risks. The product range described here includes compact heaters that warm air through natural convection, PTC semiconductor models, fan-driven heaters with adjustable thermostats, and dedicated hazardous-location options.

These types are not interchangeable. A heater intended for a standard enclosed cabinet, for example, should not be assumed suitable for a dusty, corrosive or hazardous environment. The installation context and equipment requirements should guide the selection.

Enclosure heaters: comparing the main types

Touch-safe and PTC semiconductor heaters

Touch-safe models use a temperature-limiting PTC resistor and natural convection to circulate warm air. They are double insulated and mount vertically on a 35 mm DIN rail. The listed models operate at 110/120 V AC or DC and provide 10, 20 or 50 W. Their compact housings and low power ratings make them distinct from the larger, fan-driven options in the range.

Semiconductor heaters also use a positive temperature coefficient (PTC) heating element and mount on a DIN rail. The listed 10, 30 and 60 W models are designed to maintain a stable enclosure temperature and are specified with IP54 protection. Depending on the model, rated voltage is AC/DC 110/120 V or AC/DC 110/250 V. Their documented starting nominal current ranges from 0.8 to 2.5 A.

In a PTC heater, the heating element’s resistance changes with temperature, providing a temperature-limiting characteristic. The exact electrical and environmental ratings remain model-specific, so check the relevant product data rather than treating all PTC heaters as equivalent.

Fan-driven electric heaters

For applications using higher heat outputs, fan-driven electric heaters are available in 100, 200, 400, 800 and 1,300 W versions. A fan draws cooler air from the bottom of the enclosure, moves it past the thermostat and heating element, then discharges warmed air from the top. This forced-air circulation differs from the natural convection used by the smaller DIN-rail models.

These heaters are offered in 115 or 230 V versions, with the specified nominal current varying by wattage and voltage. Their adjustable thermostat range is 0 to 100°F (-18 to 38°C). Installation details are important: the manufacturer states that these models are not designed for dusty, dirty, corrosive or hazardous locations and recommends installation only in a totally enclosed metal enclosure. Hot surfaces and warm discharge air also require attention.

Heaters for hazardous locations

Where equipment is installed in a hazardous location, use a heater specifically certified for the applicable environment. The listed hazardous-location range includes conductive 50 and 80 W models and convection models rated at 200, 300, 400 and 600 W. These products have ATEX, IECEx, CE and cCSAus approvals identified in the product data, with certification details varying among models.

The 50 and 80 W versions are described as conductive heaters and can be mounted directly to items such as manifolds, measuring or analyzing instruments, and control valves. The higher-wattage finned models transfer heat to surrounding air and create a convection current. Separate hazardous-location thermostats are available with nominal switch-on temperatures of 50°F (10°C) or 68°F (20°C). A thermostat is required for the listed 400 and 600 W models.

Selection factors for automation teams

Before specifying a heater, review the enclosure and the conditions in which it will operate. Key checks include:

  • Location classification: Confirm whether the installation is a standard or hazardous location and verify the exact certification required for the site.
  • Heating method: Determine whether natural convection, fan-driven air circulation, or direct conductive heating best matches the equipment and installation.
  • Power and supply: Match the heater’s wattage and rated voltage to the application and available electrical supply. Review nominal or starting current as applicable.
  • Mounting and orientation: Check DIN-rail compatibility, specified mounting orientation, dimensions and available clearance.
  • Thermal conditions: Consider thermostat requirements and keep heat-sensitive components away from warm discharge areas where specified.
  • Environmental limits: Do not apply a standard heater in dusty, corrosive or hazardous conditions when its stated application excludes those environments.

Installation and safety considerations

Heater placement affects both safe operation and the temperature experienced by nearby components. For fan-driven models, the manufacturer calls for clearance around the heater and cautions that discharged air can be quite warm. The heater’s dimensions and clearance drawing should be consulted during cabinet layout. The instructions also explicitly state not to install these heaters on wood panels.

For hazardous-area installations, the heater’s certification, operating voltage, temperature classification and any thermostat requirements should be checked against the intended application. A product described for hazardous locations is not automatically suitable for every classified area; the specific model approvals and installation requirements need to match.

Conclusion

Choosing enclosure heaters starts with the operating environment and the equipment that needs protection. PTC DIN-rail heaters provide compact, low-wattage options; fan-driven models offer higher outputs with thermostatic control; and certified hazardous-location heaters address applications where standard models are unsuitable. By checking ratings, heating method, mounting, clearances and certifications before installation, engineering and operations teams can select a heater that aligns with the enclosure’s practical requirements.

Access Official Technical PDF

About The Author