Access Official Technical PDF

Share Summary:LinkedInEmail

Roots vacuum pumps are used to move large volumes of gas in low and medium vacuum systems, supporting processes from coating and metallurgy to semiconductor production and research. Selecting a pump is not simply a matter of matching nominal pumping speed to a process: engineers must also consider pressure conditions, gas characteristics, leakage requirements, installation and the backing pump. The OktaLine portfolio spans pumping speeds from 250 to 25,000 m3/h and includes configurations for standard service, pressure surges and potentially explosive environments.

How Roots pumps fit into vacuum systems

A Roots pump is typically used as part of a pumping arrangement rather than viewed in isolation. In the documented performance data, smaller models are paired with two-stage backing pumps, while larger models are paired with single-stage backing pumps. The combination affects the system’s evacuation performance, so pump selection should account for the complete vacuum train and its operating range.

The portfolio’s stated applications include thin-film technology, load-locks, freeze-drying, electron beam welding, industrial leak detection, steel degassing and chemistry and process technology. It also covers semiconductor processes such as chemical vapor deposition (CVD), physical vapor deposition (PVD) and ion implantation, along with research chambers, accelerators and fusion reactors. These processes differ substantially, making application conditions—not just the broad industry category—central to specifying a pump.

Roots vacuum pumps: design features and operating considerations

The pump’s gear box and bearing area are separated from the gas-pumping chamber. Its rotors operate without contact, supporting dry operation in the pumping chamber. The design also uses an integral overflow valve. The manufacturer describes this valve as supporting fast evacuation, preventing thermal overload and allowing the pump to accommodate differential pressure within the model’s specified limits.

Air cooling is another design feature. The portfolio presents it as a way to reduce operating costs compared with water cooling. The stated benefits also include a rugged, compact design, long service intervals and on-site maintenance. These points may help operations teams assess utility requirements and maintainability, but final suitability still depends on the process, installation and operating conditions.

Choosing between shaft seals and magnetic coupling

Standard A and pressure-surge-resistant AD pumps use shaft seals. AM and ADM models use an integral magnetic coupling to provide hermetic sealing. The catalog lists a leak rate of 1 × 10-2 mbar l/s for pumps with shaft sealing and 1 × 10-5 mbar l/s for magnetic-coupled pumps. Where process containment or gas leakage is an important design criterion, this difference is a relevant selection point.

The magnetic coupling transmits drive through a sealed can, separating the motor shaft from the pump’s internal rotor shaft. This avoids a conventional shaft penetration into the pumping chamber. For processes involving toxic or aggressive gases, a sealed configuration may be appropriate to evaluate, while compatibility with the gas and the full system design must also be confirmed.

Matching the pump series to process conditions

The OktaLine families distinguish between pressure rating, sealing approach and hazardous-area requirements:

  • A Series: Standard pumps rated for 1 bar, with pumping speeds from 250 to 25,000 m3/h and shaft seals.
  • AD Series: Pressure-surge-resistant pumps rated for 16 bar, offered from 500 to 6,000 m3/h with shaft seals.
  • AM Series: Standard 1 bar pumps from 250 to 6,000 m3/h with magnetic coupling for hermetic sealing.
  • ADM Series: Pressure-surge-resistant, magnetically coupled models from 500 to 6,000 m3/h.
  • ADx and ADEx Series: ATEX-configured options for specified explosive-atmosphere applications, with the series differing in protection details and zone suitability.

The ADx range is described for Zone 2 outside the pump, while ADEx is specified for Zone 1 inside and outside. Both are listed with pumping speeds from 500 to 4,000 m3/h and pressure-surge-resistant construction. ADEx models include PTFE sealing and an integrated ATEX-certified temperature sensor; the brochure also states that they can be switched on at 800 mbar without a bypass. Hazardous-area equipment must be selected against the applicable process and installation requirements, not by series name alone.

Practical questions for system design

Before specifying a Roots pump, engineering and operations teams can clarify several requirements:

  • What pumping speed is required across the intended pressure range, and what backing pump will be used?
  • Does the process involve pressure surges that call for a 16 bar pressure-surge-resistant model?
  • Are leakage limits or gas containment requirements a reason to consider magnetic coupling?
  • Does the atmosphere or gas require an ATEX-configured pump, and what zone applies inside and outside the equipment?
  • Will the process form deposits or expose pump components to aggressive media?
  • What connection sizes, installation space, utilities and maintenance access are available?

Accessories can also be part of the specification. Options described for the portfolio include splinter shields, sealing-gas supply kits to protect operating fluid and oil-chamber components, gear-chamber evacuation kits, and flushing kits for processes prone to deposits. PTFE sealing material is identified for resistance to aggressive media. The flushing-kit design is application-specific, and the standard-pump arrangement requires sealing gas to prevent fluids from reaching the oil chambers.

Building a complete vacuum solution

A pump’s nominal capacity is only one element of system performance. Backing-pump pairing, process gas, pressure conditions, sealing, hazardous-area classification, connections and accessories all influence the final configuration. Standard pumping stations and customized solutions are also available through the CombiLine concept described in the portfolio, providing a route to specify the pump as part of a complete vacuum system.

For engineers and plant decision-makers, the practical lesson is to define process and safety requirements before narrowing the model range. The OktaLine portfolio offers multiple paths across low and medium vacuum duties, from standard shaft-sealed pumps to magnetically coupled and ATEX-configured versions. A selection based on the full operating envelope can help align pumping capacity, containment, pressure resistance and maintainability with the needs of the application.

Access Official Technical PDF

About The Author