Access Official Technical PDF

Share Summary:LinkedInEmail

R290 (propane) and R600a (isobutane) are flammable refrigerants used in freezer and chest-freezer production. Managing them safely requires more than selecting a charging machine: the production setup must also account for leak detection, ventilation, appropriate connection tools, and equipment documentation. A procurement specification for these systems can help engineering and purchasing teams assess whether the required components are covered and identify details that need clarification before ordering.

Flammable refrigerant safety depends on the whole work area

A gas charging station, alarm system, and ventilation equipment serve different but complementary roles. The charging station supports refrigerant handling during production; gas detectors monitor for combustible gases; and ventilation helps limit gas accumulation in production premises. Treating these as one coordinated installation makes it easier to review interfaces, placement, and operating requirements rather than evaluating each item in isolation.

Equipment specifications should also distinguish between what a device does and what it is certified for. For example, a listed explosion-protection certificate is not a substitute for checking that the offered model, installation, and intended operating conditions match the project requirements. The procurement document calls for ATEX or IECEx certification for relevant equipment, but buyers should confirm the applicable certification and supporting documents for each offered item.

Choosing an R290 charging station

The specified charging station is intended for production using both propane and isobutane. Its listed components include a two-stage vacuum pump, an electronic vacuum gauge, electronic scales, a control module, and hoses and connections for refrigerant cylinders. The requested pump capacity is at least 45 litres per minute, with a vacuum level of at least 25 microns; the scale capacity is at least 10 kilograms with stated accuracy of ±2 grams.

These details provide a basis for comparing quotations, but the complete configuration matters. Confirm that the proposed connections and hoses suit the planned workflow and that the station includes the specified hose for removing propane from the working area. The requested unit is mounted in a robust metal frame on wheels and uses single-phase 220–230 V power at 50–60 Hz. Check electrical compatibility and the intended location as part of installation planning.

Because the equipment handles flammable refrigerants, certification is a central purchasing check. The specification requests ATEX conformity under Directive 2014/34/EU for the charging station. Buyers should request technical documentation for the exact model offered rather than relying only on a general product brochure or a supplier’s description.

Leak detection and ventilation requirements

The specified alarm system includes a two-channel controller, two semiconductor gas sensors intended to detect propane and isobutane, and audible and visual alarms. Its stated concentration range is 0–30 ppm, with a single-phase 220 V, 50 Hz supply. When reviewing an offer, confirm that the proposed sensors are suitable for the target gases and that the controller, alarms, and sensors are included as a complete set.

Detection is only useful when the system’s arrangement and operating requirements are understood. Confirm sensor and alarm locations, installation responsibilities, and how the equipment will be checked and maintained. The specification lists environmental operating conditions as “10–450 C,” which is ambiguous as written. The buyer should clarify the intended range with the supplier before using it as an acceptance criterion.

For ventilation, the requested supply-extract system comprises two explosion-proof centrifugal fans, each with a stated capacity of 600 cubic metres per hour and low or medium pressure up to 3 kPa. The specification also calls for a compact design, direct connection to an explosion-proof motor, single-phase 220 V, 50 Hz power, and operation at temperatures of at least +40°C. Verify that the offered equipment meets the required ATEX or IECEx certification and that its configuration fits the site’s ventilation design. The stated fan capacity alone does not establish how a system will perform in a particular room.

Connection tools and procurement checks

The listed LOKRING kit supports mechanical connections in hard-to-reach locations. It includes manual mounting pliers, interchangeable nozzles for sizes from 1/4 to 1 3/8 inches, anaerobic sealant, and specified couplings and adapters. Confirm the delivered kit contents, connection sizes, and documentation against the production requirements before acceptance.

Across all equipment categories, a disciplined quotation review should check:

  • Certification: Request the applicable ATEX or IECEx evidence and verify it against the model offered.
  • Quality documentation: Confirm the manufacturer’s ISO 9001 quality-system documentation or accepted equivalent.
  • Manuals and language: Ensure operating, maintenance, and troubleshooting materials will be supplied in the required language. The specification requests Russian documentation with delivery, while allowing English or Russian for evaluation.
  • Warranty and support: Check for the requested minimum 12-month warranty after acceptance and clarify its coverage.
  • Delivery and commissioning: Confirm whether transport, installation, testing, and commissioning are included where applicable.
  • Model-specific details: Review brochures and technical data for the exact products proposed, and resolve unclear or conflicting requirements before award.

Procurement terms can also affect project planning. The cited request, for example, sets a delivery period of 60 days from contract signing and specifies delivery terms, payment conditions, and potential liquidated damages. These are commercial requirements rather than equipment characteristics, but engineering and operations teams should understand them because they influence scheduling, acceptance, and readiness for production.

Conclusion: specify and verify the complete installation

For R290 and R600a production, flammable refrigerant safety depends on coordinated charging, detection, ventilation, and connection equipment, supported by clear certification and operating documentation. Engineering teams should review the complete system and intended work area, while procurement teams verify model-specific compliance, delivery scope, warranty, and unresolved specification details. Clarifying ambiguities before purchase helps ensure that the supplied equipment can be properly evaluated, installed, and accepted.

Access Official Technical PDF

About The Author