An industrial gas transmitter is more than a sensor at the edge of a process. It is part of a safety and control chain that must detect the gases of interest, provide a usable measurement and communicate reliably with equipment in a safe area. The ADOS GTR 210 illustrates how sensor choice, installation conditions and output configuration shape that chain across industrial environments.
The transmitter is intended for continuous gas measurement in both normal locations and areas with explosion risks. Its sensor options address combustible, toxic and non-combustible gases and vapours, while its display presents measured concentration and adjustable alarm thresholds. A current signal proportional to concentration can be sent to an evaluation unit located away from explosion hazards.
Industrial gas transmitter design starts with the measurement principle
Different gases and measurement objectives call for different sensing methods. The GTR 210 product family offers sensor elements based on semiconductor, catalytic, thermal-conductivity, electrochemical, infrared and photo-ionisation principles. Oxygen measurement is also listed with an electrochemical cell. These methods do not respond to gas in the same way, so choosing the sensor requires identifying the target gas and the required measurement range.
Combustible and reducing gases
The TGS semiconductor sensor uses a tin oxide (SnO2) sintered substrate. When combustible or reducing gas is absorbed at the sensor surface, its electrical conductivity changes. The transmitter uses that change to determine gas concentration.
The VQ sensor uses catalytic heat reaction. Combustible or reducing gases and vapours contact a measuring element and undergo catalytic combustion, raising its temperature and changing its resistance. An inert element compensates for temperature and the conductivity of the test gas. The specified applications include poisonous, combustible and explosive gases in the lower explosive limit (LEL) region.
Other gases and measurement ranges
A GOW sensor measures thermal conductivity. It compares a measuring element exposed to the test gas with a reference element exposed to ambient air. Differences in gas concentration affect heat transfer and, in turn, the measuring element’s resistance. This method is intended for gases whose thermal conductivity differs substantially from air.
Electrochemical TOX sensors measure sampled gas by diffusion through a cell. The product information lists toxic-gas applications including CO, NH3, NO2, SO2 and H2S, among others. For oxygen, the electrochemical process produces a current proportional to oxygen concentration at constant air pressure.
For infrared measurement, gas passes through a chamber illuminated by an IR source. The detector measures the reduction in radiation intensity at a wavelength absorbed by the target gas. Comparing that response with a wavelength not absorbed by the gas helps compensate for interference from factors such as dust and ageing, according to the product description.
The PID measuring head uses ultraviolet radiation to ionise gas molecules. It can measure volatile organic compounds whose ionisation potential is below the UV source energy of 10.6 eV. Listed examples include toluene, xylene and trichloroethylene; detection of phosphine is also identified as possible. The transmitter’s sensor table provides ranges that vary by sensor and target gas, from ppm ranges to volume-percent and LEL measurements.
Match the transmitter to the installation environment
Hazardous-area suitability is a central selection factor. The GTR 210 Ex version is listed for equipment group/category II 2G and II 2D, with protection marking Ex db e ia mb IIC T4 Gb and Ex tb IIIC 135° Db. The stated ATEX and IECEx certificates apply to the explosion-protected version. The product information also lists EN 60079-29-1:2016 and EN 50104:2010, and a SIL 1 functional-test certificate. These approvals should be checked against the requirements of the specific installation and the applicable device configuration.
Environmental limits and enclosure protection also affect placement. The listed operating temperature range is -25°C to +60°C, subject to possible limitations from the sensor element used. The Ex version has IP66/IP67 protection; standard and Comfort versions are listed as IP54 or IP66/IP67. Confirm the required protection class, sensor temperature limits and mounting orientation during project specification. The sensor table permits mounting up to 90 degrees from the vertical position, subject to the stated configuration.
For marine installations, an MED option is described for use in applications such as gas tankers, container ships and offshore platforms. The product information states that the option is suitable for installation under deck and on deck in weather-zone conditions, with compliance and saltwater durability verified as described in the documentation. The option is intended for harsh marine and aggressive environments.
Plan signal integration and maintenance
Sensor outputs connect to the transmitter’s central unit through a multicore cable for processing. The Ex and standard versions are specified with a three-wire 4–20 mA output. The Comfort version is listed with one 4–20 mA output, four potential-free changeover contacts for alarm or failure, and a digital input for alarm cancellation. The listed supplies are 24 V DC for the Ex and standard versions, and 230 V AC for Comfort, with 115 V AC available as an option.
These details help define how the transmitter fits into a distributed control system, safety-related evaluation unit or alarm architecture. The display and adjustable alarm thresholds provide local information, while the current output supports remote evaluation. During design, verify that the selected version’s outputs, supply and alarm interfaces match the receiving equipment and site wiring practices.
Sensor service life and response time vary by measurement method and gas. The published response times range from approximately 30 seconds to 120 seconds, while expected sensor life ranges from about 12 months to several years, depending on the sensor and exposure conditions. Some sensor life estimates exclude gases that cause catalytic poisoning or attack sensor materials. Maintenance planning should therefore be based on the selected sensor and the gases present, rather than on a single family-wide assumption. The product information describes the sensor elements as plug-in types, making them replaceable.
Practical implications for gas-monitoring projects
Specifying an industrial gas transmitter begins with the hazard and the measurement task: identify the gas, concentration range and required detection method. Then check hazardous-area certification, ambient conditions, enclosure protection, installation orientation, power supply and the interface to the evaluation system. Finally, account for response time and sensor replacement needs in the operating plan.
The GTR 210’s range of sensing principles and configurations supports applications across chemical processing, paint and plastics production, wastewater facilities, refineries, laboratories, boiler systems and other listed environments. The practical value of that flexibility depends on selecting the right sensor and version for the actual installation. A well-matched transmitter provides a defined measurement path from gas detection to the control or alarm equipment responsible for acting on it.