Access Official Technical PDF

Share Summary:LinkedInEmail

III-nitride VCSELs offer a route to compact, vertically emitting lasers in the blue-to-green wavelength range, with potential relevance to displays, optical communications, sensing and other photonic systems. Their development, however, involves a materials challenge: creating highly reflective cavity mirrors without adding excessive complexity or optical loss. Recent research illustrates two approaches—curved mirrors for lateral optical confinement and nanoporous GaN for reflective, electrically conducting layers.

Why III-nitride VCSELs need different reflector strategies

A vertical-cavity surface-emitting laser (VCSEL) emits light perpendicular to the active region, unlike an edge-emitting laser, whose cavity runs parallel to that region. The vertical geometry can support multiple devices on a chip and is associated with advantages such as low threshold current, high-frequency operation, efficiency and compact integration.

VCSELs commonly rely on distributed Bragg reflectors (DBRs): alternating layers with different refractive indices that reflect light at the intended wavelength. In III-arsenide devices, AlGaAs compositions can provide substantial refractive-index contrast, enabling relatively compact reflector stacks. The AlGaN alloy range has a narrower index range, so a reflector made from alternating AlGaN layers would need many more pairs to achieve strong reflectivity. Dielectric DBRs are another option, but they add process complexity.

Short emission wavelengths also affect cavity design. III-nitride lasers generally need short cavities to limit diffraction-related effects, placing additional demands on how the optical field and current are confined.

Curved mirrors improve confinement in GaInN devices

One approach, investigated by Sony researchers, combines dielectric reflectors with a curved mirror to confine light laterally. In an earlier device, epitaxial lateral overgrowth helped form a short cavity: dielectric material was deposited on a GaN substrate, openings were made in the reflector, and metal-organic chemical vapor deposition was used to continue epitaxial growth from the exposed regions. A device with a 4.5-micrometer cavity produced single-longitudinal-mode emission at 453.9 nm at 20 mA.

In later work, the researchers used a curved back mirror to reduce the beam waist at the planar top mirror. The structure included a GaInN quantum-well active region between n- and p-type GaN, a transparent indium tin oxide (ITO) contact, and dielectric Ta2O5/SiO2 reflectors. Boron implantation defined a 3-micrometer current aperture, while etching the thinned substrate formed the curved mirror.

The device reached continuous-wave lasing at a threshold current of 0.25 mA, with a reported current density of 3.5 kA/cm2. Its dominant emission peak was at 445.3 nm. The researchers attributed the low threshold to the mirror’s lateral optical confinement, alongside changes to the device structure. These included reducing the ITO thickness from 30 nm to 20 nm and reducing the number of quantum wells from four to three. The results show why mirror geometry, current aperture and optical losses need to be considered together when engineering a VCSEL cavity.

Nanoporous GaN creates a conducting DBR

A team from the University of New Mexico and Sandia National Laboratories explored a different way to increase refractive-index contrast: selectively porosifying n+-GaN layers within a lattice-matched GaN DBR. Removing material to form nanopores lowers the effective refractive index of those layers, creating contrast with the undoped GaN layers while retaining an electrically conducting reflector structure.

The researchers demonstrated electrically injected, non-polar m-plane GaN VCSELs with a nanoporous bottom DBR. The reflector comprised 16 pairs of 41 nm undoped GaN and 60 nm n+-doped GaN layers. Electrochemical etching through exposed DBR sidewalls porosified the doped layers. A dielectric SiO2/SiNx DBR formed the top reflector, and the cavity was designed with an optical thickness of eight wavelengths.

Careful positioning of the active region and ITO contact within the standing-wave pattern was intended to maximize optical gain and limit contact-related loss. In pulsed testing, a device with a 20-micrometer aperture had a threshold current density of about 20 kA/cm2 at 9.6 V. The top reflector’s measured reflectivity was 99.7%; the bottom reflector’s reflectivity was estimated at 99.9%. Maximum output power was about 1.5 mW, and emission at twice threshold was centered at 408.7 nm.

Uniformity remains a practical design concern

The nanoporous devices also highlight a challenge that matters beyond reflector performance: cavity uniformity. The emission included a secondary spectral peak that the researchers did not attribute to a higher-order mode. They proposed that local differences in effective refractive index, caused by non-uniform nanoporous layers, could produce regions with different wavelengths despite sharing the same longitudinal mode number.

Near-field images showed emission spots, or filaments, and a divide across the aperture. The team associated the divide with opposing pore-etch fronts meeting within the aperture and suggested that changing the aperture position or etch direction could address the issue. Such observations underline that a high-reflectivity DBR is only one part of the engineering problem: the cavity must also support consistent optical and electrical behavior across its active area.

Implications for VCSEL development

The two approaches address distinct bottlenecks. Curved mirrors provide a means of shaping the optical field and improving lateral confinement in GaInN devices. Nanoporous GaN offers a path to high-index-contrast, conducting bottom reflectors in m-plane structures. Neither result removes the need to manage fabrication complexity, current injection, optical losses and material uniformity.

For engineers and technical decision-makers evaluating III-nitride VCSELs, the practical takeaway is to assess the reflector, cavity geometry and current aperture as an integrated system. Progress in these areas could support more capable short-wavelength laser structures, but repeatable cavity formation and uniform emission remain essential considerations as the technology develops.

Access Official Technical PDF

About The Author