Access Official Technical PDF

Share Summary:LinkedInEmail

CMOS technology is the dominant choice across much of the image-sensor market, but that does not make CCD image sensors obsolete. For industrial and scientific imaging, sensor selection depends on the requirements of the instrument—not simply on which technology is most widely used. In applications such as near-infrared imaging, microscopy, spectroscopy, astronomy, and space science, CCD characteristics can still make them the better fit.

Understanding the differences between CCD and CMOS architectures helps engineers assess image quality, signal levels, integration needs, mission risk, and long-term availability before committing to a detector.

CCD image sensors and CMOS: different readout architectures

Both CCD and CMOS sensors use silicon detector arrays to convert incoming light into electrical signals. Their key architectural difference is how pixel charge is converted and read out.

In a CCD, charge from pixels is transferred through a limited number of output nodes, often a single node. That charge is converted to voltage and sent off the sensor as an analog signal. Since the pixels can be dedicated largely to capturing light, this approach supports high output uniformity, an important factor in image quality.

In a CMOS sensor, each pixel has its own charge-to-voltage conversion. The device may also include amplification, noise correction, and digitization circuitry, producing digital output. Parallel readout enables high bandwidth and flexibility, but pixel-to-pixel conversion can result in lower uniformity than in a CCD.

Neither architecture wins on every measure. CMOS generally offers higher readout speed, greater flexibility, simpler interfacing, and lower susceptibility to some radiation effects. CCDs can offer advantages in dynamic range, near-infrared performance, uniformity, electron multiplication, and time-delay integration. The appropriate choice depends on which of these characteristics matter most to the application.

Where CCDs retain an industrial imaging advantage

Near-infrared sensitivity

Near-infrared imaging, typically covering wavelengths of 700 to 1,000 nanometers, is one area where CCD design can be advantageous. Infrared photons are absorbed deeper in silicon than visible photons, so effective detection requires a thicker photon-absorption region. CCDs designed for this purpose can use thicker epitaxial layers while retaining the ability to resolve fine spatial detail. The source describes some near-infrared CCD layers as more than 100 microns thick, compared with the 5-to-10-micron layers common in most CMOS imagers.

For system designers, this means detector selection should account for the wavelength range and the sensor’s construction, rather than relying on a general comparison of CCD and CMOS performance. A CCD designed for near-infrared sensitivity may be preferable when that spectral response is a central requirement.

Very low-light measurement

Electron-multiplying CCDs, or EMCCDs, multiply the signal charge packet before readout. This can improve the signal-to-noise ratio for extremely faint signals and make it possible to detect signals that would otherwise fall below the sensor’s noise floor. EMCCDs are therefore used in scientific applications where individual photons may need to be counted.

These capabilities are relevant to measurement systems in which collecting a strong signal is difficult or the light level is inherently low. They are not a universal replacement for other sensor types: their value depends on whether the application needs this low-signal performance.

Why space imaging still uses CCD technology

Space instruments must meet demanding requirements for electro-optical performance, reliability, radiation behavior, and long-term stability. CCDs have a long history in space missions, and established flight heritage can be an important consideration when the sensor is a critical component and replacing it in service is impractical.

Performance priorities vary by mission, but may include quantum efficiency, noise, dynamic range, dark signal, uniformity, and repeatability. CCDs offer advantages in some of these areas, including uniformity, dynamic range, and response at longer wavelengths. Large-format or wafer-scale detectors are also relevant to space-based astronomy; CCDs have been used for such applications, although CMOS wafer-scale devices are also being produced for some ground-based X-ray applications.

Radiation effects require a more nuanced comparison. Both CCDs and CMOS sensors can suffer gradual performance degradation from radiation damage. CMOS is described as more resistant to proton radiation, while its logic circuitry can also be vulnerable to transient effects such as single-event upsets and functional interrupts, and to latch-up events that may permanently damage a sensor. CCDs avoid those particular logic-circuit effects because they do not use the same CMOS logic structures. Radiation qualification remains a specialized, time-consuming part of sensor selection and mission design.

Manufacturing continuity and product assurance

For long-duration programs, the manufacturing process matters alongside detector specifications. Space and scientific projects can span many years, while commercial semiconductor processes continue to evolve. Changes between production runs may create qualification challenges when a project needs the same detector design to be manufactured again after a substantial interval.

A vertically integrated, dedicated CCD production facility can provide control over detector design and manufacturing processes, as well as process stability and repeatability. Such control can support quality and product assurance activities. By contrast, CMOS devices are commonly designed by fabless companies and manufactured in commercial foundries that serve many products and customers. The commercial model supports high volumes, but evolving processes may need to be considered when planning repeat production and requalification.

Availability is also a practical design concern. A sensor chosen for a long-life instrument must remain obtainable, or have a credible supply plan, for the program’s duration. The lowest initial cost or strongest single performance metric may not be sufficient if the required device or manufacturing process cannot be maintained.

Making the CCD-versus-CMOS decision

System integrators and instrument designers can compare candidate sensors against the actual requirements of the application:

  • Optical performance: Consider wavelength range, sensitivity, noise, dynamic range, and pixel uniformity.
  • Readout and integration: Assess required speed, interface complexity, and whether functions such as time-delay integration or electron multiplication are needed.
  • Environmental demands: Include radiation exposure, power requirements, reliability, and long-term stability where relevant.
  • Program lifecycle: Evaluate flight or application heritage, manufacturing continuity, customization needs, qualification effort, and expected production volume.

Commercially, an existing sensor is generally less costly than developing a fully custom device. For custom adaptations, CCD development may be less costly than CMOS development in many cases, while higher-volume production can help offset CMOS development costs. These trade-offs depend on the specific design and production requirements, so they should be evaluated early rather than treated as an afterthought.

Conclusion: match the detector to the application

CMOS is the right choice for many imaging systems, particularly where speed, flexibility, and integration are priorities. But CCDs remain relevant where their combination of uniformity, dynamic range, near-infrared response, electron multiplication, or established space heritage aligns with the task. For automation and scientific instrument teams, the practical lesson is to compare technologies against the complete system requirement—including manufacturing continuity and qualification—rather than assume CMOS is a direct replacement for every CCD application.

Access Official Technical PDF

About The Author