Screen printing for energy devices offers manufacturers a way to pattern functional materials using a process already established in technical printing. Its wide choice of printable materials and controllable ink-film thickness make it relevant to devices that need more than thin electronic coatings. Research into printed thermoelectric generators, supercapacitors, and batteries illustrates both the process’s potential and the engineering work required to turn a printable concept into a practical device.
For automation and manufacturing teams, the central question is not simply whether a material can pass through a screen. It is whether the complete layer stack can be printed with suitable geometry, electrical or ionic function, adhesion, and registration—without damaging the layers beneath it.
Why screen printing suits energy-device layers
Screen printing is used in printed electronics because it can accommodate diverse functional inks and deposit films across a broad thickness range. Depending on ink viscosity and the printing setup, layers may range from hundreds of nanometres to hundreds of micrometres. That flexibility is significant for energy devices, which often require comparatively thick active materials rather than the very thin films used in some optoelectronic applications.
Layer thickness and lateral resolution are linked to the printing form and process settings. Mesh selection affects the volume of ink transferred, while stencil thickness also contributes to the deposited film. A coarser mesh can support a higher ink volume, but may make fine features harder to reproduce. Multiple print passes can build thickness, provided each layer can be dried or cured in time and alignment is maintained.
Screen printing also involves a substantial set of adjustable parameters, including mesh, stencil, squeegee properties, and print speed. These can be matched to ink rheology, substrate characteristics, and pattern requirements. That adaptability is useful, but it makes process development an essential part of device design.
Printed thermoelectric generators: geometry and materials
A thermoelectric generator (TEG) converts a temperature difference directly into electrical potential through the Seebeck effect. A conventional thermoelectric module connects multiple n-type and p-type legs electrically in series and thermally in parallel. In a vertically structured printed design, thermoelectric materials are placed between top and bottom electrodes, with an insulating layer helping define the structure.
Printing makes it possible to form these components as a sequence of functional layers. The vertical arrangement was explored because it can be applied at a heat source, while the length and cross-section of the thermoelectric legs influence the device’s electrical and thermal behaviour. Printing cavities in an insulating layer and filling them with thermoelectric ink is one approach. It brings its own challenges: the ink must fill the openings, and the resulting features must retain the intended geometry.
Feasibility has been demonstrated for screen-printed, vertically aligned TEGs, but practical use depends on further optimisation of thermoelectric materials. Work described in the thesis also optimised a nickel-containing model ink for filling insulator cavities and developed a model to estimate generator performance from a set of design parameters. These examples highlight the connection between printability, device geometry, and functional performance.
Energy storage: supercapacitors and printed cells
Energy harvesters can provide intermittent or variable output, so storage may be needed to supply energy when generation is insufficient. Printed supercapacitors and batteries are relevant to this broader system-level challenge, including power supplies for sensor devices. They store energy differently: supercapacitors can deliver and accept power quickly, while batteries are used where stored energy and cell chemistry suit the application.
A printed supercapacitor typically includes electrodes, an electrolyte, and a separator. The separator must keep the electrodes electrically apart while allowing ions to move through the electrolyte. In a stacked layout, these layers are arranged vertically; a coplanar layout places key elements beside one another. In either case, layer thickness, material compatibility, and registration affect whether the assembled structure works as intended.
The research examined a printable separator based on cornstarch modified with citric acid for a supercapacitor, reporting electrochemical performance described as competitive with printed supercapacitors reported elsewhere. It also investigated printed primary zinc/manganese dioxide cells and tested a cornstarch-and-lactic-acid separator. These are specific demonstrations, not evidence that a single formulation will suit every production line or device design.
Manufacturing considerations for functional screen printing
Match the printing form to the pattern
Screen printing uses mesh to carry the stencil image, while stencil printing uses a patterned sheet without mesh. The choice affects ink transfer and the handling of internal pattern features. For screen printing, mesh material, opening, and thread dimensions influence both deposited volume and achievable detail. Stencil thickness and aperture geometry also matter, particularly when filling cavities or printing thick films.
Design around ink behaviour and drying
Ink rheology must support transfer through the openings and formation of the intended layer. The ink must also wet and adhere to the substrate. Drying is a process-design variable: solvent evaporation, UV curing, or elevated-temperature treatment may be needed depending on the formulation. When conductive particle inks are used, drying and subsequent processing affect particle contact and therefore the formation of conductive pathways. Fast solvent evaporation can improve contact between particles but may increase mechanical stress, so electrical and mechanical requirements must be balanced.
Protect earlier layers in the stack
Multilayer devices require each new printing and curing step to be compatible with the underlying material. Potential concerns include layer damage, poor adhesion, cracking, delamination, and registration error. These are not solved by screen resolution alone. Ink formulation, layer sequence, drying conditions, and printing-machine configuration all need to be considered together.
Conclusion: treat printability as part of device engineering
Screen printing for energy devices is most useful when manufacturing constraints are considered from the start of the design process. The technique can deposit thick, patterned functional layers and has been used to demonstrate printed thermoelectric generators, supercapacitors, and primary cells. However, a printable material is only one part of a viable device. Engineers and integrators must also evaluate feature geometry, ink transfer, substrate wetting, curing, layer compatibility, and electrical or electrochemical behaviour. Coordinating those factors is the practical route from a printed layer to a functional energy component.