Access Official Technical PDF

Share Summary:LinkedInEmail

For a multi-megawatt photovoltaic plant, battery energy storage can help bridge the gap between variable solar generation and changing electricity demand. A battery energy storage system (BESS) combines electrochemical storage with power conversion and control equipment, allowing stored energy to be managed alongside the PV plant and, where applicable, the electrical grid. Its performance depends not just on battery capacity, but on how the complete system is selected, integrated and operated.

What a BESS contributes to a solar plant

Solar generation does not necessarily coincide with periods of highest demand. A BESS can store some available energy and release it later, supporting a more flexible relationship between production and consumption. In grid-connected applications, storage may also support functions such as balancing generation and demand, responding to changes in power, and helping manage voltage or frequency. For off-grid sites and islands, batteries can complement renewable generation and reduce reliance on diesel generation.

These possible functions are not automatic: the system’s role depends on its design, operating strategy and connection requirements. Engineers must determine which service the plant needs to provide and size the storage system accordingly.

Battery energy storage system components

A BESS is more than a collection of cells. Its main elements work together to store energy, convert electrical power and supervise safe operation:

  • Battery cells and modules: Connected into packs or larger assemblies to provide the required energy and power capacity.
  • Power conversion system (PCS): The interface between the batteries’ DC power and the AC network. It manages conversion and supports battery charging and discharging.
  • Battery management system (BMS): Monitors battery conditions and helps protect and balance the cells during operation.
  • Energy management system (EMS): Coordinates system operation and schedules charging and discharging in line with the plant’s requirements. Supervisory control and data acquisition (SCADA) may support monitoring and remote control.
  • Thermal management: Helps control operating temperatures, which can affect battery performance and ageing.

Inverters, transformers and grounding arrangements also affect how a PV-plus-storage plant connects to loads or the grid. The electrical configuration must account for conversion stages, protection, power quality and the requirements at the point of connection.

Choosing a battery technology

Battery technologies differ in energy and power density, efficiency, service life, response time, cost and operating requirements. There is no single characteristic that determines the best choice: the appropriate technology depends on the application and how the system will be used.

Lithium-ion

Lithium-ion batteries have become a prominent option for large-scale storage. The source review identifies their energy density, power capability and charging and discharging performance as advantages. However, temperature affects their operation and lifetime, and they require protective controls. A BMS is particularly important for monitoring operating conditions and managing charging and discharging.

Lead-acid

Lead-acid batteries are a mature technology and have been used in power-system backup applications. Their lower initial cost can be attractive, but their usable energy is affected by depth of discharge and discharge rate. The review also notes limitations in energy density, cycle life and recharge time compared with some alternatives. These considerations can affect replacement needs and the overall economics of a project.

Flow and high-temperature batteries

Redox-flow batteries store energy in liquid electrolytes held in external tanks. Their power and energy capacity can be configured in ways that suit some stationary applications, and the review highlights their potential for large-scale use. Their costs and performance remain important selection factors. Sodium-sulphur batteries are another stationary option, but operate at high temperatures, bringing additional requirements for thermal control and safe operation.

Design factors that influence usable storage

Nominal capacity alone does not tell operators how much energy a battery can reliably deliver. Depth of discharge (DoD) describes how much of the battery’s capacity is used. Operating at greater DoD can increase the energy available in a given cycle, but the source notes that deeper discharge can shorten battery cycle life. Design therefore involves balancing usable energy against lifetime.

Discharge rate matters as well. A battery may provide less usable capacity when asked to discharge more quickly. The source describes this effect for lead-acid batteries and notes that higher loads can also influence voltage. System sizing should reflect the required power and discharge duration, rather than relying on capacity figures alone.

Temperature is another essential operating condition. High temperatures can accelerate battery ageing, while very low temperatures can affect performance and may create freezing concerns for batteries with liquid electrolytes. Thermal management and site conditions should therefore be considered during BESS design.

Efficiency should be assessed across the charging and discharging cycle, alongside the system’s other operating demands. The source review notes that charging the final portion of a lead-acid battery can be slower and less efficient than charging a lithium-ion battery. Actual system performance will depend on the selected technology and operating conditions.

Integrating storage into plant controls

The PCS, BMS and EMS have distinct but connected responsibilities. The BMS monitors battery conditions; the PCS manages the electrical interface and power conversion; and the EMS coordinates when the system charges or discharges. Clear coordination among these functions helps ensure that operating commands respect battery limits and grid or plant requirements.

Project teams should define the intended operating use before finalizing system capacity and control strategies. They should also consider the required discharge duration, expected depth of discharge, temperature conditions, power conversion topology and protection requirements. These factors influence both the battery selection and the supporting electrical and control infrastructure.

Conclusion

Battery energy storage can make a multi-megawatt PV plant more flexible, but its value depends on a well-integrated system rather than battery capacity in isolation. Engineers and decision-makers should compare technologies against the plant’s required power and duration, usable depth of discharge, efficiency, lifetime, temperature conditions and control needs. Matching the battery, PCS, BMS and EMS to the intended application is central to designing storage that can operate safely and meet the plant’s practical requirements.

Access Official Technical PDF

About The Author