Deep-ultraviolet (DUV) LEDs based on AlGaN are being developed for applications including sterilization, water purification, surface disinfection and UV curing. For industrial automation teams considering UV sources in equipment or process systems, the technology’s potential must be weighed against a central engineering challenge: AlGaN DUV LED efficiency depends on several losses occurring inside and around the semiconductor device. Progress has come from improving crystal quality, controlling carrier flow and extracting more generated light.
AlGaN can emit across a broad ultraviolet range, approximately 200–360 nm. Light in the 260–280 nm range is of particular interest for sterilization and water treatment because it aligns with the reported germicidal effectiveness range. Yet achieving useful ultraviolet output is not simply a matter of selecting an emission wavelength. Internal quantum efficiency (IQE), electron injection efficiency (EIE) and light extraction efficiency (LEE) all influence how much electrical input becomes light available outside the LED.
Why AlGaN DUV LED efficiency is difficult to improve
IQE describes how effectively injected carriers generate photons inside the quantum wells. EIE concerns whether electrons reach those wells rather than leaking into other layers. LEE is the proportion of generated light that escapes the device. Together, these factors help explain why a high-quality emitting region alone does not guarantee high external quantum efficiency (EQE), the share of injected electrons that result in photons emitted from the device.
AlGaN quantum-well performance is sensitive to threading dislocations—crystal defects that can provide paths for non-radiative recombination. In addition, p-type AlGaN has low hole concentrations, which can make carrier injection difficult and contribute to electron overflow. Conventional p-GaN contact layers create another problem: they absorb DUV light, limiting the amount that can escape. These interconnected constraints mean device improvements must address the material, electrical and optical design together.
Improving internal quantum efficiency with AlN templates
One approach to raising IQE is to reduce the defect density in the AlN crystal template on which AlGaN layers are grown. A reported metal-organic chemical vapor deposition method combines ammonia pulsed-flow and continuous-flow growth in a multilayer sequence. Pulsed flow supports initial AlN growth on sapphire, while continuous flow helps smooth the surface. Repeating the modes can produce thick, crack-free AlN with an atomically flat surface.
Lower threading-dislocation density in the template supports better-performing AlGaN quantum wells. In room-temperature photoluminescence measurements, emission intensity increased substantially as the X-ray rocking-curve width narrowed, an indicator associated with improved crystal quality. The underlying device principle is that fewer nearby defects can reduce non-radiative carrier losses. AlN epitaxial lateral overgrowth on patterned sapphire substrates was also used to reduce dislocation density further.
Quantum-well structure matters as well. Very thin wells with smooth interfaces can help manage polarization effects in AlGaN. The same growth platform was used to demonstrate AlGaN and InAlGaN LEDs spanning 222–351 nm, showing that changes in alloy composition and layer design can support different UV wavelengths.
Using multi-quantum barriers to control electron flow
In short-wavelength LEDs, a conventional single electron-blocking layer may not provide a sufficient barrier against electrons escaping the quantum wells. The issue is compounded by low hole concentrations in p-type AlGaN. A multi-quantum barrier (MQB) electron-blocking layer offers an alternative: alternating barrier and well layers can reflect electrons through repeated interactions, increasing the effective barrier compared with a single layer.
In reported 250 nm devices, replacing a single-barrier layer with an MQB increased output power and EQE; the estimated EIE rose from approximately 25% to more than 80%. The size of the improvement varied with wavelength and device structure. This illustrates why carrier confinement is an important design consideration, particularly for LEDs operating below 260 nm, where electron leakage can be pronounced.
Extracting more light from the device
DUV photons can be lost through absorption in contact layers or trapped within the device. Improving LEE therefore involves both choosing materials that transmit ultraviolet light and directing reflected or trapped light toward an escape surface. Demonstrated approaches include:
- Transparent p-AlGaN contact layers: These reduce absorption compared with p-GaN, although contact resistance can increase and raise operating voltage.
- Reflective p-type electrodes: Reflective metals can return light toward the extraction side. A thin nickel layer over aluminium was reported as one electrode approach, balancing contact formation and reflectivity.
- Patterned sapphire substrates: An AlN template grown on a patterned substrate can scatter light and support extraction.
- Flip-chip mounting and encapsulation: These structures can help light escape, including through a lens-like resin encapsulant.
In a reported 275 nm LED, combining a transparent p-AlGaN contact, a reflective rhodium electrode, a patterned sapphire substrate and encapsulation raised EQE to 20.3% at 50 mA. The study also found that the transparent contact layer increased driving voltage, highlighting a practical trade-off: optical gains must be considered alongside electrical input when evaluating wall-plug efficiency (WPE).
Photonic crystals and the next design trade-offs
A reflective photonic crystal (PhC) at the p-contact is another way to manage light. Its periodic structure can reflect ultraviolet radiation while retaining a p-GaN contact layer, which has a higher hole concentration than high-aluminium-content p-AlGaN. This offers a potential route to combining improved optical reflection with lower contact resistance. Tests on 283 nm LEDs reported an EQE increase from 7.9% to 10% when a PhC was introduced with a highly reflective electrode. The measured improvement depended on the design and fabrication of the structure.
PhC geometry, electrode reflectivity and device configuration all affect the outcome. As with other extraction strategies, increasing optical output does not automatically improve WPE if electrical resistance or operating voltage also rises. Engineers assessing a UV source should therefore distinguish among EQE, optical output and WPE rather than treating them as interchangeable measures.
Practical implications for UV system designers
AlGaN DUV LED development demonstrates that efficiency is a system of linked material and device problems. Lower-defect AlN templates support radiative recombination; MQB structures help keep electrons in the active region; and transparent contacts, reflective electrodes, substrate patterning and photonic structures help more light leave the chip. No single measure addresses every loss.
For integrators and technical decision-makers, the practical implication is to match the LED’s wavelength and optical output to the application while examining the associated electrical and thermal operating requirements using device-specific information. Continued gains depend on balancing IQE, EIE and LEE—and maintaining reproducible crystal growth and device structures. That combination is central to making DUV LEDs more effective sources for sterilization, water treatment, curing and other ultraviolet processes.