Access Official Technical PDF

Share Summary:LinkedInEmail

Contactless piezoelectric excitation offers a way to drive a PZT component without soldered lead wires attached directly to it. In a simulated approach, a curvilinear-shaped electrode focuses an electric field through the piezoelectric element toward a ground electrode. The concept may be relevant where wired connections constrain motion or complicate integration, particularly for small components. Its output, however, depends on how the electric field couples to the PZT and how the system is tuned.

The reported work evaluates this arrangement using finite element analysis in COMSOL Multiphysics. It examines the electric-field pattern and the voltage, stress and power produced in a PZT component positioned between copper electrodes without direct contact. The results provide a model of the excitation mechanism, rather than evidence of performance in an industrial installation.

Why consider contactless piezoelectric excitation?

Piezoelectric materials convert electrical energy into mechanical motion and can also generate an electrical response when mechanically stressed. PZT components are used in applications that include actuators, sensors and precision positioning systems. In a conventional drive arrangement, electrical energy reaches the component through connected wires, often soldered to its electrodes.

Those connections can be inconvenient when the PZT element is miniaturized or needs to move freely. Lead wires may also be vulnerable to failure at higher temperatures or interfere with continuous operation, as the study notes. A contactless drive seeks to transfer energy across a gap instead, removing the direct electrical connection between the excitation structure and the PZT component.

Contactless operation does not mean that the system has no electrodes or no electrical input. Rather, the PZT is energized by a field generated by separate electrodes. The arrangement must still deliver a sufficiently strong field to the component and be designed around its electrical and mechanical response.

How the curvilinear field generator works

The proposed setup uses a curvilinear-shaped potential electrode and a ground electrode to concentrate the electric field through the PZT component. The component sits between the electrodes, with air serving as the transfer medium in the simulated configuration. The electrodes and PZT are not in direct contact. The model considers an 8 mm distance between the electrodes and an input voltage of 50 V.

When the alternating electric field penetrates the piezoelectric material, the converse piezoelectric effect produces mechanical strain. The component can then vibrate in its thickness mode. That motion, in turn, produces an electrical response at the PZT terminals through the direct piezoelectric effect.

This sequence links the electrical drive to mechanical resonance and back to an output voltage. It also explains why the shape and distribution of the field matter: the excitation arrangement needs to couple energy into the PZT component rather than merely establish a voltage between the external electrodes.

Resonance, load and spacing shape the output

The simulated response is strongly frequency-dependent. The largest vibration occurs when the electric-field generator’s operating frequency approaches the PZT component’s mechanical resonance frequency. The study also describes output peaks associated with piezoelectric resonance. In practical terms, selecting a drive frequency is not simply a matter of applying an alternating signal; the source and component need to be considered as a coupled system.

At a reported resonance frequency of 1295 kHz, the simulation produced a maximum output power of 9.9 mW across an optimum resistive load of 19.5 kΩ, with a 50 V input and the stated 8 mm electrode separation. The reported output voltage at resonance was 18.9 V. These figures describe the modeled configuration and should not be treated as universal values for other PZT elements, electrode geometries or operating conditions.

Three variables are particularly important when assessing a contactless PZT drive:

  • Operating frequency: Output depends on the relationship between the applied frequency and the mechanical and piezoelectric resonance of the component.
  • Resistive load: The load affects how much real power is transferred from the PZT terminals. The simulated maximum occurs at an optimum load, rather than at every resistance.
  • Electrode spacing: Increasing the distance reduces electric-field strength for a given input voltage. The model consequently shows lower output power as the separation increases.

The researchers also report greater output power from the focused curvilinear field arrangement than from a capacitor-like electric-field generator in their comparison. This is a result of the modeled configurations, not a general performance guarantee for all contactless excitation designs.

What engineers should take from the simulation

For system integrators and design teams, the central implication is that contactless excitation needs coordinated electrical, mechanical and geometric design. A useful evaluation should account for the PZT’s resonance behavior, the field reaching its surface, electrode placement, the air gap and the connected load. Optimizing one factor in isolation may not produce the desired output if the others are mismatched.

The analysis provides a basis for exploring contactless actuation where direct wiring could restrict motion or complicate a compact assembly. The authors identify potential relevance to actuators, sensors, motors and implantable biomedical electronics. Those applications are proposed areas of use; further investigation is needed to improve contactless energy-transfer efficiency and establish performance in specific implementations.

Conclusion

A focused curvilinear electric field can, in simulation, excite a PZT component across a gap and generate mechanical vibration and electrical output without a direct wire connection. The modeled results show why resonance matching, load resistance and electrode spacing are central design considerations. For engineers evaluating wireless PZT drive, the practical next step is to treat these factors as an integrated design problem and validate the model against the requirements of the intended application.

Access Official Technical PDF

About The Author