Electric vehicle power electronics sit at the center of several engineering challenges: extending driving range, converting energy efficiently, supporting faster charging and maintaining reliable operation. As automakers develop battery-electric and hybrid vehicles, engineers must consider the complete electrical system—not just the battery or motor in isolation. Battery management, power conversion and the way components interact all influence how effectively stored energy can be used.
For hybrid vehicles, combining an electric power source with an internal combustion engine gives designers options for managing power across different operating conditions. Mild-hybrid architectures add a 48 V system alongside the established 12 V system, while full hybrids use a higher-voltage battery and electric machine. These approaches differ in complexity and capability, but both make electrical-system design an increasingly important part of vehicle engineering.
Electric vehicle power electronics and the range challenge
Driving range remains a central consideration in electric vehicle adoption. The vehicle must store enough energy for its intended use, and its electrical systems must make that energy available effectively. That puts pressure on several areas of design, including battery performance, conversion efficiency and the drivetrain. Charging is part of the same system-level challenge: reducing the time a vehicle needs to spend connected to a charger depends on the capabilities of both the vehicle and the charging equipment.
These priorities are connected. Improving one component does not automatically resolve the system’s broader constraints. A battery’s usable capacity, for example, can be reduced when its individual cells do not remain at comparable states of charge. Addressing such differences is therefore an important part of making a series-connected battery pack work effectively over its operating life.
Why series-connected batteries need balancing
Battery cells connected in series carry the same stack current, but they do not necessarily maintain identical states of charge. Differences in temperature, impedance, self-discharge or loading can cause cell states of charge to diverge. Cells can also lose capacity as they age, and they may do so at different rates. In a series stack, the cell with the lowest capacity can limit the usable capacity of the whole pack.
Each cell must remain within an appropriate state-of-charge range to avoid damage or reduced service life. If one cell reaches its lower limit before the others during discharge, the pack cannot make full use of the remaining capacity in those other cells. Similarly, differences between cells affect how the pack can be charged. Cell balancing is the process of managing these differences so that individual cells operate more evenly.
Passive and active balancing
Passive balancing is a comparatively simple method: it dissipates energy from cells with a higher state of charge so they approach the level of the lowest cell. However, it generates heat, can be slow and does not recover capacity lost through differences in cell capacity. It can bring states of charge closer together during charging, but it does not address every limitation that appears during discharge.
Active balancing instead transfers charge between cells or groups of cells. In principle, this allows energy to be moved to cells that need it rather than dissipated as heat. When cell capacities differ, an active system can redistribute charge so that cells reach their operating limits more closely together. This can help recover usable pack capacity that would otherwise be constrained by the weakest cell.
Efficiency and thermal considerations
Active balancing introduces its own design trade-offs. Balancing current can be substantial in high-current battery systems, so losses in the transfer process matter. Inefficient balancing produces additional heat, while heat is itself an important concern for battery-pack performance and lifetime. The balancing circuit, its control strategy and the battery-management system must therefore be considered together.
One example described for series-connected lithium-ion and lithium iron phosphate cells uses a bidirectional active-balancing controller. It transfers charge between a selected cell and a group of neighboring cells, with the battery-management system making the balancing decisions. In this approach, local cells do much of the charge transfer; moving energy from one end of a stack to the other through repeated conversions is not necessarily required. The example illustrates how circuit topology can affect the practical implementation of balancing.
Safety is also essential. Monitoring and protection can help prevent data or wiring faults, as well as cell overvoltage or undervoltage conditions, from causing damage. Balancing should therefore be viewed as part of a broader battery-management function—not as a standalone way to increase capacity.
Designing connected vehicle power systems
Hybrid architectures add further coordination requirements. A 48 V system may operate alongside a 12 V battery and 12 V loads, with a converter transferring power between the voltage domains. A bidirectional converter can support power flow in either direction, while the wider system must accommodate the vehicle’s different electrical loads. These choices influence the design of the power conversion system and its integration with the rest of the vehicle.
For engineers and system integrators, the practical task is to evaluate how the battery, balancing strategy, converters, drivetrain and charging approach work together. Design decisions should account for:
- Usable battery capacity: Cell-to-cell variation can limit how much of the pack’s capacity is available.
- Energy losses and heat: Balancing and conversion efficiency affect how much energy is dissipated within the system.
- Operating limits: Cells must remain within appropriate voltage and state-of-charge ranges.
- System integration: Dual-voltage hybrid architectures require coordination between batteries, converters and electrical loads.
Conclusion
Electric vehicle power electronics must help manufacturers address range, charging, efficiency and reliability as a connected set of design problems. For battery packs, cell imbalance can restrict usable capacity, while active balancing offers a way to transfer charge rather than simply dissipate it. In hybrid vehicles, additional voltage domains and power-flow requirements increase the importance of system integration. Careful attention to battery management, conversion losses, thermal behavior and protection provides a practical foundation for developing dependable electric and hybrid vehicle systems.