India’s energy storage roadmap provides a planning framework for a power system expected to accommodate growing volumes of variable renewable energy (VRE), rooftop solar and electric mobility. For utilities, system integrators and industrial energy users, its central message is practical: storage should be assessed in relation to specific grid constraints and use cases, rather than treated as a single, one-size-fits-all technology.
The roadmap was developed for 2019–2032, with particular attention to integrating 40 GW of rooftop photovoltaic (RTPV) capacity into medium- and low-voltage networks. Its estimates are scenario-based and reflect the policies and information available when the study was prepared. They are best understood as a planning reference, not a statement of current installed capacity or a guaranteed forecast.
Why India’s energy storage roadmap focuses on grid flexibility
Solar and wind generation vary with weather and time of day, while electricity demand follows its own patterns. As VRE penetration increases, the difference between when power is generated and when it is needed can complicate system operation. Distributed generation also changes power flows on distribution networks that were not necessarily designed for substantial power injection from customers.
The roadmap identifies several constraints that can limit a feeder’s ability to host additional rooftop solar:
- Voltage rise and regulation: local generation can affect voltage, particularly when output is high relative to local demand.
- Equipment loading: transformers and feeders have thermal limits that must be considered.
- Reverse power flows: power flowing back toward the substation can affect regulators, tap changers, losses and protection.
- Power quality and protection: harmonics, fault levels, islanding and protection coordination can influence safe interconnection.
These effects depend on feeder topology, load, impedance, voltage characteristics, and the location and size of PV systems. As a result, hosting capacity is a network-specific engineering question. A single rooftop-solar threshold cannot describe every distribution circuit.
Planning storage around distribution networks
To examine distribution-grid conditions, the study modelled networks associated with six Indian distribution companies using CYMDIST. The analysis considered different levels of VRE penetration and supported the development of guidance for assessing hosting capacity on medium- and low-voltage feeders.
That work points to the value of combining network data with scenario analysis. Utilities assessing a proposed storage project need to understand when and where constraints occur, how generation relates to local demand, and which operational problem the asset is intended to address. Storage may be considered alongside other flexibility measures, including demand response, smart inverters and vehicle-grid integration.
The Energy Storage India Tool (ESIT) was developed to support techno-commercial evaluation. It uses network load data and can compare storage options for different applications, account for multiple use cases, and evaluate monetizable and non-monetizable benefits. Its outputs also include operating indicators such as charge-discharge cycles and energy throughput, which can help stakeholders examine how a proposed operating profile may affect the asset.
Importantly, the roadmap notes that ESIT does not replace detailed power-flow analysis. Economic assessment and network studies answer different questions: a project may show potential value in a cost-benefit model, while voltage, protection or other engineering issues still require separate evaluation.
What the projected storage requirements indicate
For MV/LV grid support, the roadmap estimated total battery storage requirements of about 1,295 MWh in 2019, rising to 9,390 MWh in 2022, 23,010 MWh in 2027 and 32,675 MWh in 2032. These estimates cover battery requirements associated with the study’s grid scenarios; they are not a complete measure of storage demand across all sectors.
The broader projections also considered transmission-grid support, telecom towers, data centres, backup systems, other stationary applications and electric vehicles. In the roadmap’s consolidated estimates, electric mobility represented a major source of projected battery demand. This wider scope matters for industrial decision-makers because storage planning is connected not only to renewable generation but also to transport electrification and backup-power requirements.
The study focused its quantitative estimates on lithium-ion batteries, citing their range of applications and the cost trajectory considered at the time. It reviewed other technologies, including pumped hydro, compressed air, flywheels, supercapacitors and other battery chemistries. The choice of technology for an actual project still depends on the application’s power and energy needs, duration, location, operating profile and commercial conditions.
Turn use cases into project economics
Storage value depends on how an asset is operated and which benefits can be captured. The roadmap discusses applications including peak shaving, ancillary services, renewable output smoothing, energy time-shifting, backup power and deferral of transmission or distribution upgrades. Behind-the-meter projects may also be assessed for electricity savings or reduced diesel-generator use, where relevant to the site.
For engineers and project teams, a disciplined evaluation should therefore:
- Define the constraint or objective. Specify whether the project addresses feeder loading, peak demand, renewable variability, backup requirements or another use case.
- Use representative operating data. Match load and generation profiles to the location and intended operating strategy.
- Check network impacts. Evaluate voltage, thermal limits, power quality, protection and reverse power flow as applicable.
- Assess combined value streams carefully. Consider which benefits are measurable and monetizable, and avoid assuming that every potential benefit can be realized simultaneously.
From roadmap to implementation
The roadmap’s practical contribution is a structured way to connect renewable-energy targets with distribution planning, storage evaluation and policy design. For utilities, that means building feeder-level understanding before setting deployment assumptions. For integrators and industrial users, it means selecting a storage configuration around a defined operational need and testing the economics against realistic use cases.
Energy storage can support greater renewable integration, but it does not remove the need for sound network data, engineering studies or appropriate tariffs and regulations. The most useful takeaway from the energy storage roadmap India is to treat storage as part of a broader flexibility portfolio—coordinated with grid upgrades, smart inverters, demand response and EV integration—and to validate each project against the conditions of the network it will serve.