Access Official Technical PDF

Share Summary:LinkedInEmail

EV power converters control how electrical energy moves between a vehicle’s battery, electric machine and other electrical systems. By switching semiconductor devices at high speed, they modify voltage and current to suit each part of the drivetrain. Understanding these conversion stages helps engineers and technical decision-makers assess drivetrain architecture, energy flow, electrical isolation and component requirements.

What EV power converters do

A power converter uses semiconductor switches to change the voltage level or waveform between its input and output. Capacitors and inductors support this process as switching states are controlled to produce the required electrical output. In an electric vehicle (EV), converters manage power from the battery to the motor, and can also process energy flowing back toward the battery during braking.

Converter behavior depends on factors such as the electric machine and the required power. A battery supplies direct current (DC), but the voltage and current delivered to the machine must be regulated. If the drivetrain uses an AC machine, an inverter converts DC to alternating current (AC); when energy flows in the opposite direction, the power electronics process it back toward DC.

Types and classifications of EV power converters

Power converters are commonly classified by the types of input and output they handle:

  • DC-DC converters change one DC voltage level to another.
  • DC-AC converters, or inverters, convert DC to AC.
  • AC-DC converters, or rectifiers, convert AC to DC.
  • AC-AC converters convert between AC supplies.

Converters can also be unidirectional or bidirectional, depending on whether power can flow in one direction or both. They may be isolated or non-isolated. Isolation is required between the EV battery and the grid for safety, so the AC-DC on-board charger, the DC-DC battery converter, or both must provide it, depending on the vehicle design and converter topology.

DC-DC conversion during driving and braking

In many EV architectures, the battery voltage is lower than the voltage required on the high-voltage DC bus. A bidirectional battery DC-DC converter can manage the difference. During propulsion, it operates in boost mode, stepping up the battery voltage to supply the bus. During regenerative braking, energy from the electric machine returns to the bus, and the converter operates in buck mode to step the voltage down to a level suitable for charging the battery.

The DC bus links the battery converter and the motor-drive inverter. A large capacitor in this link stores energy and helps connect the conversion stages. In a hybrid electric vehicle (HEV), the drivetrain may also include a combustion engine, a generator, a battery, a bidirectional battery converter and a bidirectional motor-drive converter. The generator is typically driven by the combustion engine.

Converter operation is coordinated with vehicle demands, including acceleration and braking. In an AC-motor drivetrain, the inverter processes power between the DC bus and the motor; power flow reverses when energy is returned during braking. The auxiliary supply also supports vehicle equipment. It is typically 12 V in current vehicles, while 48 V is identified as a possible future level in the source material.

Semiconductors, ratings and system design

Power semiconductor devices are central to automotive power electronics and influence system efficiency, cost and size. MOSFETs and insulated gate bipolar transistors (IGBTs) are examples of active switches used to control loads, including motors. Diodes can rectify alternator AC, provide a freewheeling current path in converters and inverters, and suppress voltage transients. Other device types include thyristors, bipolar junction transistors and gate turn-off thyristors. Smart power devices and power integrated circuits may combine switching with control, diagnostic or protective functions.

Voltage ratings must account for more than a system’s nominal battery or operating voltage. Automotive electrical systems can experience transients, from higher-energy events associated with the alternator and regulator to lower-level noise from switching inductive loads such as relays, solenoids and motors. Adequate device voltage ratings help withstand these conditions. Current ratings, meanwhile, relate to energy dissipation and junction temperature. A device’s maximum continuous current is generally defined by its ability to conduct without exceeding its maximum junction temperature.

Why SiC devices matter

Silicon carbide (SiC) is an emerging power semiconductor material with properties that can benefit power conversion. Its higher breakdown electric field allows a thinner drift region and can reduce specific on-resistance compared with silicon. For devices rated in the 600–2000 V range, lower on-resistance can make majority-carrier devices such as MOSFETs and Schottky diodes suitable alternatives to minority-carrier devices such as IGBTs and PiN diodes. This can reduce switching losses and charge-storage effects.

Lower switching losses can enable higher switching frequencies, which may allow smaller passive components such as filter inductors and capacitors. SiC’s wider bandgap and higher thermal conductivity also offer potential advantages in operating temperature and heat transfer. These characteristics may reduce demands on thermal management, although the actual system design depends on its devices and operating conditions.

Energy, power and battery C-rate

Converter analysis follows the principle of energy conservation: output power equals input power minus converter losses. Efficiency is the ratio of output power to input power, expressed as a percentage. At either side of a converter, electrical power is calculated as voltage multiplied by current.

Vehicle kinetic energy is described by E = ½mv², where m is vehicle mass and v is velocity. This energy helps explain the opportunity to recover some motion energy during braking. Battery power can be expressed as P = VI, and energy delivered over time, assuming no losses, as E = Pt. Battery C-rate can be estimated by dividing battery power in kilowatts by nominal capacity in kilowatt-hours, or by dividing charge or discharge current by nominal capacity in ampere-hours.

Practical implications for EV drivetrain design

EV power converters are not simply voltage-changing components: they coordinate energy flow across the drivetrain and must be selected for the required power direction, voltage levels, isolation and operating conditions. For engineers and system integrators, the practical design task is to match converter topology and semiconductor ratings to the vehicle architecture while accounting for losses, electrical transients, thermal limits and regenerative energy flow. These considerations connect component selection directly to safe, effective drivetrain operation.

Access Official Technical PDF

About The Author