Li-ion battery temperature measurement is a core part of battery monitoring and thermal management. Temperature affects battery performance and aging, and elevated temperatures can contribute to hazardous conditions. Yet a sensor’s reading may not represent the hottest region of a cell: heat generation and dissipation create temperature gradients within individual batteries and across modules and packs. Engineers selecting sensors for a battery management system (BMS) must therefore consider not only accuracy, but also where and how temperature is measured.
Several approaches are in use or under investigation, from established contact sensors to optical and electrical methods. Each offers different trade-offs in installation, response and suitability for surface or internal measurement.
Why battery temperature is difficult to measure
During charging and discharging, internal resistance and electrochemical reactions generate heat. Some heat is irreversible, while reaction entropy can produce either heating or cooling depending on conditions such as state of charge. Heat conducts through the cell and dissipates from its surface to the surrounding environment. The balance changes with operating conditions, battery design and cooling arrangement.
Because heat is generated inside the cell, the core can become hotter than the surface. A surface sensor may consequently miss the maximum internal temperature, particularly under demanding operating conditions. At pack level, cooling distribution can also create differences between cells. These gradients matter: they can contribute to uneven current distribution, local state-of-charge differences and unequal aging.
Temperature data helps the BMS and thermal management system (TMS) assess operating conditions alongside voltage and current. It can support decisions intended to keep batteries within specified limits and help identify abnormal heating. But the value of that data depends on whether sensor placement captures the temperature conditions that matter for the application.
Established options for Li-ion battery temperature measurement
Thermistors
Thermistors are temperature-sensitive resistors. Negative-temperature-coefficient (NTC) types, commonly used for measurement, decrease in resistance as temperature rises. They are widely used in battery applications because they are small, relatively inexpensive and sensitive to temperature changes. Their resistance-temperature relationship is nonlinear, so converting a measurement into temperature typically requires a lookup table or an appropriate mathematical conversion.
Thermistors can be placed on a cell surface, near terminals or between adjacent cells. That flexibility does not guarantee full coverage: a sensor contacting two cells measures their local surface conditions, not necessarily the temperature of every cell or the hottest point inside a cell. Sensor count and placement are therefore practical design choices, especially when wiring, installation and cost must be managed.
Resistance temperature detectors
Resistance temperature detectors (RTDs) use metallic conductors whose resistance increases with temperature. Platinum RTDs are a common choice. Compared with thermistors, they generally have a more linear response and can offer strong stability and accuracy, although the specific performance depends on the device and measurement setup. Their resistance can be read by applying a small current and measuring the voltage; connection wiring also matters because lead resistance can introduce error.
RTDs are used for battery research and model validation, including surface measurements. Internal installation is possible in experimental designs, but placing a sensor inside a cell can affect the cell’s construction and performance. Any internal sensor also has to withstand the battery’s chemical environment.
Thermocouples
Thermocouples generate a voltage when two different conductors experience a temperature difference. They are widely used in industrial measurement and can be made small, making them useful for battery tests and surface measurements. They do not require an external excitation current, but accurate readings require reference-junction compensation. Their voltage-temperature relationship is nonlinear, and corrosion and wiring considerations can affect long-term use.
Thermocouples can also be integrated into experimental cells to measure internal temperatures. This requires careful design: sensor integration and protective coatings must be considered to avoid unwanted effects from the cell environment or assembly process.
Emerging approaches: optical and impedance-based sensing
Fiber Bragg grating sensors
Fiber Bragg grating (FBG) sensors measure shifts in the wavelength of light reflected by a grating within an optical fiber. Temperature changes affect the reflected wavelength, allowing a fiber to carry out measurements at multiple locations when it contains multiple gratings. FBG sensors are passive and immune to electromagnetic interference, attributes that make them interesting for battery monitoring. They can also be explored for internal measurements, although sensor integration, protection and long-term in-cell performance require attention.
FBG technology is promising, but its suitability depends on the application and validation requirements. Calibration across relevant operating conditions, durability and compatibility with cell construction are important considerations before deployment.
Impedance-based temperature indication
Electrochemical impedance spectroscopy (EIS) applies a small electrical excitation and measures the battery’s response across frequencies. Battery impedance can vary with temperature, so impedance-related parameters can be used to estimate temperature without adding a dedicated temperature sensor. The approach is of interest because the same measurements can also provide information relevant to battery state estimation.
Impedance is also influenced by factors including state of charge and battery aging. Charging or discharging currents and electrical interference can further complicate interpretation. Temperature estimation therefore requires methods that account for these influences; impedance should not be treated as a direct, context-free temperature reading.
Johnson noise thermometry, thermal imaging and liquid-crystal thermography are also identified as temperature-indication approaches for batteries. Their practical selection depends on measurement needs, integration constraints and the information required by the BMS or test setup.
How to select a measurement method
There is no single best sensor for every cell, module or pack. Selection should reflect the required measurement range, accuracy, resolution, cost and installation environment. Engineers should also distinguish between surface monitoring and internal temperature measurement, and consider whether measurements must capture temperature at one location or across multiple points.
- Define the measurement objective: identify whether the priority is routine monitoring, thermal-model validation, hot-spot detection or internal temperature assessment.
- Plan sensor placement: account for expected gradients within cells and between cells, rather than assuming one surface reading represents a whole pack.
- Assess integration: consider wiring, sensor size, protective materials and any effect on cell construction.
- Validate the reading: evaluate the method under relevant operating conditions, including the influence of state of charge, aging and electrical noise where applicable.
Practical implications for battery systems
Temperature sensing is most useful when measurement strategy and thermal design are considered together. A cooling layout can change where gradients develop, while sensor location determines which parts of those gradients the BMS can observe. Conventional thermistors, RTDs and thermocouples provide established options; FBG and impedance-based techniques offer alternative paths that may address particular monitoring needs, but bring their own integration and validation challenges.
For battery engineers and system integrators, the practical goal is not simply to install a sensor. It is to obtain temperature information that is representative enough for the intended control or safety decision. Thoughtful placement, suitable measurement technology and validation against the system’s operating conditions help make temperature data a more useful input to battery management.