North Carolina greenhouse gas emissions are tracked across sectors that include electricity, transportation, industrial and commercial fuel use, agriculture, waste, and land use. The state’s 2019 inventory offers engineers, plant managers, and other decision-makers a structured view of how those sources changed from 1990 through 2017, alongside a reference-case projection to 2030. For industrial organizations, it provides context for understanding where energy-related emissions fit within a broader statewide picture—and what the inventory can and cannot tell an individual facility.
What the inventory measures
The North Carolina Department of Environmental Quality’s inventory estimates six greenhouse gases: carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and sulfur hexafluoride (SF6). Emissions are expressed as carbon dioxide equivalent (CO2e), which applies each gas’s global warming potential to provide a common unit for comparing and adding different gases.
The report covers combustion, industrial processes, waste management, agriculture, natural gas and oil systems, and relevant land-use activities. It also counts emissions associated with electricity generated outside North Carolina but consumed within the state. This accounting boundary matters: electricity-related emissions are included even when the power plant is not located in North Carolina.
The inventory reports both gross emissions and net emissions. Net emissions subtract estimated carbon sinks, including carbon stored in forests and other lands. In 2017, gross emissions were estimated at 150.08 million metric tons CO2e. After accounting for an estimated 34.03 million metric tons of net carbon sinks, net emissions were 116.06 million metric tons CO2e.
North Carolina greenhouse gas emissions by sector
In 2017, electricity generation and use was the largest source category, representing 35% of gross emissions. Transportation accounted for 32%, while residential, commercial, and industrial (RCI) fuel combustion contributed 14%. Together, these categories show how energy supply, mobility, and direct fuel use shape the statewide inventory.
Compared with the inventory’s 2005 baseline, gross emissions in 2017 were down 19%, from 184.74 to 150.08 million metric tons CO2e. Changes varied considerably by sector:
- Electricity generation and use: emissions decreased 34% between 2005 and 2017.
- RCI combustion: emissions decreased 20%.
- Transportation: emissions decreased 12%.
- Industrial processes: emissions increased 88%, from 3.83 to 7.18 million metric tons CO2e.
- Waste management and natural gas systems: emissions increased 3% and 16%, respectively.
The report links much of the reduction in electricity and RCI emissions to a shift from coal to natural gas, alongside increased energy efficiency. Coal-combustion emissions fell 55% from 2005 to 2017, while emissions from natural gas combustion nearly doubled. These figures describe changes in fuel-related emissions; they do not, by themselves, quantify the performance of any particular facility or process.
Why the electricity and fuel mix matters
Electricity-related emissions include both generation within the state and imported electricity. In 2017, the inventory attributed 45.32 million metric tons CO2e to in-state electricity generation and 7.28 million metric tons CO2e to imported electricity. Keeping the two components visible helps decision-makers distinguish between emissions from power generated in North Carolina and those associated with electricity consumed in the state but produced elsewhere.
The inventory also reports changes in renewable electricity generation. Solar, hydroelectric, and wind together represented 9% of North Carolina’s electricity generation in 2017. The report estimated that renewable generation avoided 4 million metric tons CO2e that year. For plant and operations teams, the statewide figures are useful context, but assessing a facility’s electricity-related emissions requires attention to its own consumption and the applicable accounting method.
Direct combustion is another important part of the picture. Industrial fuel-combustion emissions declined 30% between 2005 and 2017, according to the report. This statewide change highlights why fuel type and consumption are important inventory inputs. It does not identify the specific operational changes behind every industrial facility’s emissions trajectory.
Land sinks, projections, and uncertainty
North Carolina’s land use, land-use change, and forestry (LULUCF) category accounts for carbon stored or released through changes in natural and working lands. The inventory estimated that these lands acted as a net carbon sink of about 34 million metric tons CO2e in 2017. Biomass combustion CO2 is treated within this category under the inventory’s accounting approach to avoid counting those emissions twice.
The report’s reference case projected net emissions of 104.25 million metric tons CO2e in 2025, a 31% reduction from 2005, followed by 107.35 million metric tons in 2030. These are projections from the 2019 inventory, not measured outcomes or current forecasts. They relied on factors such as expected fuel use, land use, population, and historical trends. The report also noted uncertainty about future regulations and did not include additional reductions from potential state mitigation strategies.
For operational planning, a statewide inventory is a baseline and a way to compare sector trends—not a substitute for facility-level emissions data. Plant teams can use its categories to frame questions about purchased electricity, onsite fuel combustion, process emissions, and refrigerants. However, the inventory’s estimates are assembled from federal and state data, EPA tools, and selected state-specific refinements; individual organizations need their own relevant operating and consumption data to understand their facility’s contribution.
Practical implications for industrial decision-makers
The inventory’s central message is that emissions trends differ by source. Electricity and transportation emissions fell over the period examined, while industrial-process emissions rose. Carbon sinks also materially affect the distinction between gross and net totals. For engineers, integrators, plant managers, and operations leaders, these distinctions help place energy and emissions discussions in the right context, identify which categories warrant closer examination, and avoid treating a statewide projection as a facility-specific target.
Because the report was designed as a baseline for evaluating future mitigation options and anticipated biennial updates, its value lies partly in consistent tracking over time. Decision-makers should note the inventory year and its assumptions when using the figures, then pair statewide context with measurements and records appropriate to their own operations.