Access Official Technical PDF

Share Summary:LinkedInEmail

Optical wireless communication uses light to transmit data through free space, offering a complement to radio-frequency networks in applications where lighting infrastructure, line-of-sight links or atmospheric scattering can be used. For industrial automation teams, the central design question is not simply whether a light source can carry a signal, but how reliably that signal reaches a receiver under real operating conditions. Performance depends on wavelength, link geometry, receiver characteristics and the environment between the endpoints.

Visible light communication (VLC) and ultraviolet (UV) communication use different parts of the optical spectrum and support different link configurations. Channel characterization—including measurement of attenuation, pulse spreading and signal variation—is essential for estimating link budgets and making system design decisions.

Optical wireless communication: visible and UV approaches

Optical wireless systems typically use a light source to convert an electrical signal into modulated optical output. A photodetector converts received light back into an electrical signal. In intensity modulation and direct detection, information is encoded in changes to light intensity; the receiver detects optical power rather than the signal’s phase. On-off keying and pulse-position modulation are examples of intensity-based schemes.

VLC uses visible light, commonly from LEDs that can serve both illumination or signaling functions and data transmission. Most VLC links rely on a direct line of sight (LOS), although diffuse, non-directed configurations can also use reflections. Because visible light does not pass through walls, a link’s coverage is tied to the room or space and the positions of its transmitter and receiver.

UV communication can use atmospheric scattering to establish non-line-of-sight (NLOS) links. Rather than requiring a direct path, the receiver collects photons scattered through the atmosphere. This makes link geometry more flexible, but scattering also causes substantial channel attenuation. UV-C systems can benefit from low solar background in the solar-blind band, while UV sources and systems still need to meet applicable exposure limits.

Channel geometry shapes VLC performance

For indoor VLC, transmitter and receiver placement affects the optical channel and the amount of received signal. Research approaches examined in the dissertation include precoding for red, green and blue (RGB) LED systems and optical multiple-input, multiple-output (MIMO). In MIMO, multiple transmitting and receiving elements create spatial paths that can be used to improve system capacity. A receiver arranged in a beehive-like structure was investigated as a way to provide spatial diversity for massive MIMO.

These approaches highlight a practical point for integrators: link design involves more than selecting an LED and photodetector. The number and arrangement of optical elements, their orientation and the indoor channel all influence performance. VLC designs must also preserve the light source’s primary function when it is part of an illumination system.

VLC can also be considered for vehicle-to-vehicle links using vehicle lights. Channel analysis in the work examined the effect of vehicle exhaust on a vehicular VLC link. This is an example of why an assumed clear optical path may not fully represent operating conditions: potential obstructions or changes in the propagation environment need to be considered in the channel model and validation plan.

What NLOS UV measurements reveal

For scattered UV links, the transmitter beam and receiver field of view define a shared atmospheric region, often called the common volume. Photons that scatter within this region may reach the receiver. The link therefore depends on the transmitter and receiver angles as well as their separation, not just on source power.

Overland field measurements assessed path loss, pulse broadening and received-photon distributions at distances extending to long-range links. Monte Carlo models—numerical simulations that track photon propagation and scattering—were compared with measured results. The comparisons showed reasonable agreement for some measurements, but the model generally underpredicted observed path loss. Adding turbulence-related attenuation improved some path-loss estimates, yet other predicted turbulence effects, including a log-normal distribution of received photon counts, were not supported by the measurements. The mismatch points to a need for model refinement rather than treating simulation as a substitute for field validation.

Overwater measurements examined shore-to-shore NLOS UV configurations, with data collected from a few hundred metres up to 2.9 km. At shorter distances and lower angles, the channel could be treated similarly to its overland counterpart. At longer distances, particularly near or beyond 1 km, the measured channel differed significantly from predictions of a previously reported multiple-scattering Monte Carlo model. Energy fluctuations and excess path loss associated with turbulence were identified as relevant performance concerns as separation increased.

Implications for system design and validation

For engineers and technical decision-makers, these findings support a disciplined link-design process:

  • Define the link geometry. Establish whether the application requires direct LOS, diffuse VLC or scattered NLOS UV communication, and account for transmitter and receiver orientation.
  • Build a channel-specific link budget. Include expected attenuation and, for pulsed systems, pulse broadening. A model’s fit to one condition does not guarantee accuracy at other distances or angles.
  • Validate under representative conditions. Field measurements are important where turbulence, exhaust or overwater propagation may affect the received signal.
  • Match the receiver to the application. Detector area, gain, bandwidth and dark noise are among the characteristics that affect detection; the appropriate balance depends on the link and signal design.

Optical wireless communication offers several distinct ways to transmit data, from LED-based indoor VLC to atmospheric-scattering UV links. Their practical performance is governed by the channel, not just by the transmitter. For automation and other technical applications, the key takeaway is to select the link geometry deliberately, characterize the environment and treat measured performance as a necessary check on channel models and link-budget assumptions.

Access Official Technical PDF

About The Author