Access Official Technical PDF

Share Summary:LinkedInEmail

Power devices are essential components in industrial automation because they regulate how electrical energy is converted and delivered to motors, drives and other equipment. In an inverter, for example, semiconductor switches control the conversion of DC power to AC power so a motor can operate as required. These devices also support voltage conversion and other power-control functions across applications from factory machinery to rail transport and renewable energy systems.

For engineers and automation decision-makers, selecting and applying power devices involves balancing efficiency, capacity, reliability, cost and physical size. A business strategy presented by Mitsubishi Electric in 2017 illustrates how these considerations shape semiconductor development, product packaging, manufacturing and segment-specific planning. Its targets and plans were set for FY2022 and should be understood in that historical context.

How power devices support industrial automation

Power semiconductors are used wherever electrical energy must be switched or converted efficiently. In industrial settings, they are found in motor-drive inverters, factory automation equipment and systems that use renewable energy. Related applications include electric rail traction, electric vehicles, air conditioners and other household appliances.

IGBTs (insulated gate bipolar transistors) and MOSFETs are two device types used in power electronics. Their application ranges depend in part on factors such as switching frequency and device output capacity. IGBT modules combine multiple IGBTs and diodes in a package, while intelligent power modules (IPMs) can also incorporate drive and protection functions. This integration can simplify how designers assemble a power-conversion system, although the appropriate device and package depend on the application.

In factory automation, the practical significance is clear: power-device characteristics influence the design of inverters and other equipment that control motors. Similar design choices matter in rail systems, renewable energy converters and electric vehicles, where operating requirements differ.

Power devices: matching chips and packages to applications

Device performance is only one part of the engineering challenge. The package must also handle heat, current, mechanical stress and installation requirements. The 2017 strategy described several package-development priorities: increasing current density, improving heat dissipation, reducing thermal resistance, extending life under thermal cycling, and integrating functions such as radiators or peripheral circuits.

These objectives may compete. A smaller package can help reduce equipment size, but the design still needs to meet the required power capacity and thermal conditions. Standardized package formats can support broader use, while application-specific designs may be appropriate where requirements call for particular performance or installation characteristics.

That is why chip and package development need to be considered together. A high-performing semiconductor chip cannot deliver its intended system-level value if the package does not suit the application’s thermal, electrical and mechanical demands.

Silicon and SiC address different design priorities

Silicon IGBTs remain relevant across a broad range of applications, with development focused on improving performance and usability. The source briefing also describes reverse-conducting IGBT (RC-IGBT) designs, which combine IGBT and diode functions on one chip. The stated aims included improved manufacturability and greater module power density.

Silicon carbide (SiC) devices were presented as an option for applications where higher performance could justify added value. The briefing identified lower power loss, higher-frequency switching and operation at higher temperatures as potential SiC advantages compared with silicon. These properties can inform designs for applications such as traction, electric vehicles, industrial power conversion and power supplies. The actual device choice still depends on system requirements, including cost and operating conditions.

SiC development also extends beyond the chip. The briefing describes work on MOSFET structures and packaging, alongside efforts to improve performance and lower costs. For automation engineers, the wider lesson is to assess the complete power-conversion design rather than choosing a semiconductor material in isolation.

Different markets require different product strategies

The 2017 plan grouped the business around four application segments: home appliances, automotive, industry (including renewable energy), and traction and electric power. Each segment presents a distinct combination of cost, performance, quality and reliability expectations.

  • Industry and renewable energy: The strategy emphasized competitive products, broader package options and products suited to both smaller- and larger-capacity requirements.
  • Traction and electric power: The focus was on high reliability and added value for infrastructure applications, including railways and power transmission.
  • Automotive: The plan called for expanding products for electric-power vehicles and developing standardized modules for global markets.
  • Home appliances: Product development sought to balance functionality and lower power loss with cost requirements.

For system integrators and plant teams, this segmentation reinforces the need to specify the use case carefully. An industrial drive and a rail traction system may both rely on power modules, but their capacity, environmental and reliability needs are not interchangeable.

Manufacturing is part of the performance strategy

The briefing also connected product differentiation with manufacturing decisions. Its approach was to retain selected high-value processes in company facilities, including Si wafer back-side processing and SiC wafer work, while using subcontracting for some silicon wafer surface-processing operations. For assembly and inspection, the plan included regional production, productivity improvement through IoT use, multiple production lines to strengthen business continuity, and development of inspection expertise.

These choices illustrate how manufacturing strategy can support product supply and process know-how. They also show why sourcing, quality controls and continuity planning matter alongside semiconductor specifications when assessing a supplier or designing a long-lived automation system.

Practical implications for automation teams

Power devices sit at the intersection of electrical conversion, thermal design, packaging and manufacturing. When evaluating them for automation equipment, teams should define the application’s operating requirements first, then consider the trade-offs among device technology, module format, efficiency, cost, reliability and integration needs. The most suitable solution is the one that fits the complete system—not simply the one with the most advanced chip.

As factory equipment, transport systems and energy applications continue to rely on controlled electrical power, power semiconductors remain a foundational design consideration. A coordinated view of chips, packages and production can help technical decision-makers make choices that align with both equipment demands and operational priorities.

Access Official Technical PDF

About The Author