Access Official Technical PDF

Share Summary:LinkedInEmail

A PV/T air collector combines photovoltaic electricity generation with solar air heating in one system. For industrial operations and facilities considering solar thermal applications, this hybrid approach can make use of both the electrical output of a PV module and heat that would otherwise build up in its cells. The practical value depends on the application, collector design, operating conditions and how performance is assessed.

PV/T systems are one way to convert solar radiation into two useful energy streams. In an air-based configuration, air flows through the collector, absorbing heat transferred from the photovoltaic panel. That heated air can support applications such as solar drying or space heating, while the panel continues to generate electricity.

How a PV/T air collector works

A conventional photovoltaic cell converts part of the incident sunlight into electrical current through the photoelectric effect. Photons absorbed by semiconductor material can release electrons, and the movement of these charges through an electrical circuit produces current. Not all incoming solar energy becomes electricity; some is absorbed as heat, raising the cell temperature.

Higher cell temperatures can reduce the electrical efficiency and output of a PV module. A PV/T air collector addresses this by moving air beneath or around the module to carry away some of that heat. The air becomes warmer as it passes through the collector, creating a thermal output alongside electricity.

The two outputs serve different needs: electrical energy can supply electrical loads, while heated air can be directed to a suitable thermal process. PV/T collectors can also be designed to use water or a combination of air and water as the heat-transfer fluid; this article focuses on air-based systems.

Why collector and airflow design matter

In a solar air collector, heat transfer from the absorber surface to the moving air is a central design consideration. Air does not flow through the tubes used in many liquid-based collectors. Designers instead shape the air passage and absorber to improve contact and heat exchange.

Approaches discussed in PV/T and solar air collector research include corrugated or finned absorber surfaces and multiple-pass airflow arrangements. These configurations change the path air takes through the collector and the area available for heat transfer. Their effects need to be assessed in the context of the complete system, including electrical performance and the intended use of the heated air.

For system integrators and facility teams, this means the collector should be evaluated as more than a PV module with a fan or air channel added. Airflow configuration, thermal demand and the required electrical output all influence whether a particular design suits the application. Solar drying is one established use discussed for PV/T air collectors, as is operation as a solar air heater.

Measuring PV/T air collector performance

Thermal efficiency relates useful heat collected to the solar irradiation received. For an air collector, useful heat is commonly evaluated from the air mass flow rate, its heat capacity, and the temperature increase between the inlet and outlet. In practical terms, the outlet temperature alone does not describe the full thermal result: the quantity of air delivered also matters.

Electrical efficiency should be considered alongside thermal output. A system assessment may also use overall energy efficiency, which accounts for the energy outputs, and exergy analysis, which considers the quality or work potential of energy. These measures answer different questions and should not be treated as interchangeable.

Exergy analysis is useful for locating thermodynamic losses. Irreversible processes destroy exergy, representing a loss of potential to produce useful work. Examining where that destruction occurs can help identify components or processes that may warrant attention during design or optimization. Energy and exergy analysis therefore offer complementary perspectives: one tracks energy quantities, while the other highlights their usefulness and losses.

Interpreting reported performance results

Published studies reviewed for PV/T air collectors report a wide spread in efficiency results. The review gives ranges of approximately 31% to 94% for energy efficiency and 8.7% to 18% for exergy efficiency. Individual studies also report different electrical, thermal and combined results across collector designs and test conditions.

These figures should not be read as a guaranteed performance range for a proposed installation. Research configurations, climates, operating conditions and calculation methods differ. Comparisons are most meaningful when the system boundaries and definitions of each efficiency measure are clear. For a project, evaluation should relate performance to the local solar resource, airflow and thermal requirements, and the collector arrangement being considered.

Practical implications for industrial applications

PV/T air collectors may be worth assessing where a site can use both electricity and low- to medium-temperature heat. The review identifies drying and solar air heating as relevant applications. A combined collector can also be attractive where available space for separate PV and solar thermal equipment is limited, although suitability depends on the specific installation and its energy demands.

  • Match heat output to a real demand: Identify whether the process can use the heated air and when that demand occurs.
  • Assess airflow design: Consider how the selected passage, absorber features and flow arrangement affect heat transfer.
  • Compare multiple performance measures: Review electrical output, useful heat, energy efficiency and exergy efficiency as distinct indicators.
  • Use application-specific evidence: Treat published results as design context, not as a direct prediction for a different operating environment.

PV/T air collector development continues to explore design improvements, simulation, prototypes and experimental testing. For industrial decision-makers, the central takeaway is to evaluate the complete energy use case rather than focusing on a single efficiency figure. When a facility can put both the generated electricity and recovered heat to work, a PV/T air collector offers a combined solar-energy approach; careful attention to airflow, operating conditions and performance metrics is essential to judging its practical fit.

Access Official Technical PDF

About The Author