Access Official Technical PDF

Share Summary:LinkedInEmail

SiC devices for electric vehicles are attracting attention as designers work to manage battery energy, higher operating voltages and increasingly compact power-electronics systems. Silicon carbide (SiC) offers different electrical characteristics from conventional silicon devices, including the potential for lower conduction and switching losses and operation at higher voltages and frequencies. Those characteristics make SiC relevant to several EV subsystems—but choosing a device is only one part of an effective design.

Engineers also need to consider gate driving, electrical isolation, protection, thermal design and the supporting components around each power stage. Looking at how SiC fits into the vehicle’s main power-conversion blocks helps clarify where it may be useful and what integration requirements matter.

Why SiC devices matter in EV power electronics

An electric vehicle’s battery stores a finite amount of energy, so the efficiency of power conversion affects how effectively that energy is used. SiC devices can reduce conduction and switching losses compared with silicon-based alternatives in suitable applications. Lower losses can, in turn, support system-level goals such as reducing cooling-system demands or improving the use of available battery energy. The actual result depends on the complete design and operating conditions; a semiconductor choice alone does not determine vehicle range or efficiency.

SiC is particularly relevant where power converters must handle elevated voltages or switch at higher frequencies. These attributes have led to increasing adoption in applications such as onboard chargers and DC/DC converters, as well as interest in SiC MOSFETs for traction inverters. SiC Schottky barrier diodes (SBDs) may also be used alongside switching devices, depending on the circuit topology.

SiC devices for electric vehicles: key applications

Main inverter

The main inverter converts battery-supplied DC into three-phase AC to drive the traction motor. Conventional inverter designs commonly use IGBTs with diodes. SiC MOSFETs provide another option, with reduced conduction and switching losses identified as key reasons for interest in them. The inverter design must also account for the gate-drive circuit, current sensing, temperature monitoring and the control electronics needed to operate the power stage.

Because the inverter is a high-power subsystem, component selection should be evaluated in the context of the full electrical and thermal design. Device performance, protection and the interaction between the switching stage and its control circuitry all contribute to system behavior.

Onboard charger

An onboard charger converts AC input into DC for charging the high-voltage battery. Its input range may need to accommodate different supply conditions, while charging requirements can involve higher voltages. These demands can make SiC devices relevant not only for charger diodes but also for switching devices such as MOSFETs.

For engineers, the charger is also a reminder that power conversion and isolation requirements go together. The power stage must work with its gate drivers and control circuitry, while the complete design addresses the electrical conditions of its intended application.

DC/DC converter

An EV DC/DC converter transfers energy from the high-voltage battery system to lower-voltage circuits. A transformer is used in the conversion process, and electrical isolation between high- and low-voltage sections is important for protecting low-voltage electronics. High-speed switching enabled by suitable SiC-based designs can support efforts to reduce converter size and improve performance, but isolation and safety remain essential design considerations.

The low-voltage side supplies vehicle electronics such as control units and other equipment. That makes the converter a meeting point between high-voltage power handling and the requirements of sensitive low-voltage systems.

Gate drivers and protection are part of the design

SiC switching devices require a gate-drive approach suited to the power stage. Isolated gate drivers help transfer control signals across the isolation boundary between low- and high-voltage circuitry. Driver selection also affects the surrounding design, including noise immunity, power consumption, switching timing and the implementation of protection functions.

Integration can influence the size and complexity of the overall system. An isolated gate driver may combine isolation and drive functions, while other designs use separate components. In either case, engineers should evaluate the driver together with the selected MOSFET or IGBT, the layout, the control strategy and the protection requirements—not as a standalone part.

Other supporting components may include shunt resistors for current detection, power-supply ICs for peripheral circuits, transistors, diodes and voltage regulators. These devices contribute to the operation of the wider system and should be selected to meet the needs of their particular circuit locations.

Where IGBTs and other devices remain relevant

SiC is not the only power-device option for EVs. IGBTs continue to serve high-voltage, high-current applications, including electric compressors. Device characteristics such as switching losses, saturation voltage and short-circuit tolerance can inform selection for a particular use. Low-voltage MOSFETs and Schottky diodes also support motor-drive and other vehicle circuits.

Intelligent power devices may provide controlled current handling and fault signaling in applications where they are used in place of functions traditionally served by fuses or relays. The appropriate solution depends on the circuit’s operating requirements and the desired behavior during normal operation and faults.

Design implications for engineering teams

When evaluating SiC devices for an EV platform, engineering teams can use a system-level review to connect semiconductor choices to vehicle requirements:

  • Map the power-conversion blocks: Identify where the design converts DC to AC, AC to DC or high-voltage DC to lower-voltage DC.
  • Compare device options in context: Assess SiC MOSFETs, IGBTs and associated diodes against the voltage, switching and loss requirements of each application.
  • Include isolation and control: Review gate-driver architecture, signal isolation and protection alongside the power device.
  • Account for sensing and support circuits: Consider current detection, power supplies, regulation and other components needed around the switching stage.
  • Check automotive quality requirements: Confirm that the components and development process align with the project’s applicable automotive qualification and functional-safety needs.

Conclusion

SiC devices can help EV designers address power-conversion demands in traction inverters, onboard chargers and DC/DC converters, particularly where lower switching or conduction losses and higher-voltage operation are relevant. Their benefits depend on how they are integrated with gate drivers, isolation, sensing, protection and thermal design. For practical decision-making, teams should assess the complete power-electronics block and compare device technologies against the specific requirements of each vehicle application.

Access Official Technical PDF

About The Author