SiC power electronics manufacturing is progressing on several fronts: semiconductor makers are developing devices for higher-voltage applications, expanding production capabilities and refining processes for more efficient use of silicon carbide (SiC) wafers. The work matters to industrial automation and power-system teams because SiC components are being pursued for applications including electric-vehicle power conversion, charging infrastructure, solar inverters, servers and industrial motor drives.
Silicon carbide has different electrical and thermal properties from conventional silicon. The source material describes SiC as offering higher electrical conductivity and enabling faster switching, lower heat loss and smaller power electronics. Realizing those benefits in production, however, depends on device architecture, wafer processing, packaging and reliable manufacturing at the required scale.
SiC power electronics manufacturing moves toward production scale
Manufacturing investment reflects the effort to transition SiC from device development into higher-volume production. Bosch, for example, reported that it was manufacturing SiC chips at its Reutlingen plant, a facility with experience producing silicon semiconductors on 150mm and 200mm wafers. The company planned to use its existing semiconductor capabilities while adding SiC production, with its Dresden facility focused on 300mm wafer manufacturing for other chip production.
That example illustrates how semiconductor manufacturers may draw on established fabrication infrastructure while adapting processes for a different material and device type. Fab planning is not only about wafer diameter: device makers must also coordinate production capacity, process requirements and downstream integration. Bosch said it intended to use the SiC chips in its own power electronics, connecting semiconductor development with system-level product design.
Dedicated equipment is another part of the scale-up. Aixtron introduced the AIX G5 WW C, a system designed for high-volume SiC epitaxial-wafer production. Epitaxy forms a controlled semiconductor layer on a substrate, creating material used in power-device fabrication. The system is based on a Planetary Reactor platform and includes cassette-to-cassette wafer handling. Its announced initial configuration supports eight 6-inch wafers with individual wafer control.
Aixtron described the system as designed to reduce epitaxy costs while maintaining production quality, and said it could fit into facilities used by the silicon industry. For manufacturers assessing capacity, this points to a practical consideration: a process tool’s throughput and wafer handling matter alongside its ability to deliver material suitable for device production.
Trench MOSFET design targets lower resistance
Device structure is also evolving. A trench-gate SiC MOSFET places the gate in a trench rather than using a conventional planar arrangement. This structure can allow more transistor cells to be packed onto a chip, but tight cell spacing can impede current flow and increase resistance. Design and process choices therefore need to balance cell density, electrical performance and reliability.
Mitsubishi Electric described a trench-type SiC MOSFET that uses an electric-field-limiting structure to protect the gate insulating film. In a trench device, a strong electric field can concentrate around the gate and threaten the insulating layer. The company’s approach uses implanted aluminium and nitrogen to modify regions of the semiconductor and manage the field. It also described locally forming a nitrogen-rich layer to help current conduct through the device.
The reported device achieved a specific on-resistance of 1.84 mΩ·cm² at room temperature while maintaining a breakdown voltage above 1500V. Mitsubishi said its result was about half the resistance of planar devices, and identified power semiconductor modules as a potential application. These figures describe the reported device, not a universal performance level for trench MOSFETs; production readiness also depends on further performance and reliability work.
Packaging and testing influence system performance
The semiconductor die is only one element of a power switch. ROHM’s 650V and 1200V SiC MOSFETs, for example, use a four-pin TO-247-4L package that separates the driver and power-source pins. In a conventional three-pin package, source-terminal parasitic inductance can reduce the effective gate voltage at the chip and limit switching speed. Separating the connections is intended to reduce that influence.
ROHM reported that the package approach could reduce total turn-on and turn-off switching loss by up to 35% compared with conventional three-pin TO-247N packages. The comparison highlights why engineers should evaluate the complete switching arrangement—including the device, package and gate-drive circuit—rather than selecting a transistor based on voltage rating alone.
Production qualification and testing are equally important, particularly where reliability requirements are demanding. The source describes wafer-level testing and burn-in equipment configured to test multiple SiC wafers in parallel. Testing before devices are assembled into modules can help identify failures earlier in the manufacturing flow. This makes test strategy, wafer handling and process control relevant parts of production planning, not simply final inspection tasks.
Where manufacturers and engineering teams should focus
For organizations evaluating SiC power electronics, the developments point to several connected questions:
- Manufacturing fit: Can existing fab infrastructure support the required SiC processes, or is dedicated capacity needed?
- Device architecture: How do planar and trench designs balance resistance, breakdown voltage and gate reliability for the application?
- System integration: How will package parasitics and gate-drive choices affect switching behavior?
- Quality strategy: At what stage should testing and burn-in occur to identify defects efficiently?
These considerations apply across applications, though the specific trade-offs will vary. Bosch identified electric and hybrid vehicles as targets for its chips, while other source examples include solar power inverters, energy-storage systems, charging stations, servers and base stations.
Conclusion
SiC power electronics manufacturing is advancing through coordinated changes in fabrication capacity, epitaxy equipment, MOSFET design, packaging and testing. For engineers and technical decision-makers, the practical implication is to assess the whole production and application chain: material and wafer processes set the foundation, while device structure, package design and qualification determine how that technology can be deployed. Continued progress in these areas will shape the ability of manufacturers to bring SiC power devices into demanding power-conversion systems.