Access Official Technical PDF

Share Summary:LinkedInEmail

Solar energy zoning determines where solar installations can be built and what reviews they must pass before operation. Shawangunk, New York’s 2018 local law established a framework that distinguishes smaller systems intended mainly for onsite use from large-scale facilities designed primarily to supply energy offsite. For developers, property owners and project teams, that distinction shapes permitting, site review, safety planning and long-term obligations.

The law’s stated aim is to encourage solar development while protecting the town’s fiscal interests, agricultural and natural resources, scenic qualities and sensitive historic areas. It is a local zoning framework, not a general technical specification: projects must also meet applicable building, electrical, fire and other requirements.

Solar energy zoning separates systems by use and scale

The law defines a small-scale solar energy system as a photovoltaic system that serves the building or parcel where it is located and is accessory to the property’s primary use. A large-scale system is ground-mounted and intended primarily for offsite use, sale or consumption. The distinction matters because small systems are generally handled as accessory uses, while large-scale projects require Planning Board review.

The text also sets a production threshold: small-scale systems are not to exceed an average production level of 10 kW; systems above that level are treated as large-scale facilities. Because the law uses the wording “per hour on average,” applicants should confirm how the Town interprets and applies that provision during project review.

A specific allowance applies to active agricultural operations in certified Agricultural Districts. These small-scale systems may provide electricity offsite, provided total generation does not exceed 110% of on-farm needs. The Building Department may require an energy assessment to establish those needs and verify compliance.

Permits, plans and interconnection documentation

Solar installations covered by the law require a building permit and Certificate of Compliance, and installation must be performed by a qualified solar installer. Large-scale systems also need a Special Use Permit and site plan approval from the Planning Board before operation. Solar-thermal and building-integrated photovoltaic systems are permitted outright in all zoning districts subject to a building permit and Certificate of Compliance; ground-mounted or freestanding versions are treated as small-scale systems.

Grid-connected projects must provide written acknowledgment from the local utility that interconnection will be available. Applications must identify connection details, including connections on or off the site, and public utility connections must receive the appropriate inspection. Before a system operates, the Town must receive proof that its electrical connections have been inspected and approved by an electrical inspection person or agency identified by the Building Inspector.

Plans must show system components and equipment, including the array, electrical service, meter, inverter, orientation, tilt and grid connections. They must also identify the project address and parcel, relevant owner and operator contact details, the plan preparer, and system capacity. Installations must comply with applicable New York building and fire code requirements, National Electrical Code standards and other relevant laws.

Small-scale installations: rooftop and ground-mounted rules

Rooftop systems using electricity onsite are allowed as accessory uses in most zoning districts, but the law excludes the LC District. They are exempt from Planning Board site plan review, though required permit, plan and safety submissions still apply. The Building Inspector must receive structural certification from a licensed professional engineer, including confirmation that structural requirements such as snow and wind loads have been addressed.

Rooftop installations must respect district height limits. Where feasible, panels facing a front yard should follow the roof angle and remain within 18 inches of the roof at the system’s highest edge. The law also sets access, pathway, ventilation and emergency-egress provisions for responders, with specified exceptions that may be approved by the Building Inspector. If these local provisions are more stringent than the state code, the state code governs.

Ground-mounted small systems are also allowed as accessory structures in most districts, excluding the LC District. They are limited to 15 feet above natural grade at maximum tilt, with specified side and rear setbacks of 35 feet and a front setback no closer than the principal structure. Their capacity should match the parcel’s energy needs; documentation may be requested. These systems are generally exempt from Planning Board site plan review, although the Building Inspector may require screening based on neighboring properties and uses.

Large-scale solar: location, review and operating controls

Large-scale systems may be considered through a Special Use Permit and site plan approval in the R-Ag 1, R-Ag 2 and R-Ag 4 districts. They are prohibited in the Ridge Stewardship districts and the Borden Home Farm Historic Overlay District. The law also continues to prohibit them in certain business, commercial and industrial districts so those areas remain available for other development.

Applications must include standard zoning submissions and additional materials such as a signed facility layout, equipment specifications, a Full Environmental Assessment Form, and information about land agreements where the operator is not the property owner. The Planning Board may request visual simulations and a noise analysis, and a wildlife management plan is required. The Board may review the entire parcel when evaluating the proposal.

Key siting and design provisions include:

  • A maximum height of 15 feet at maximum tilt and generally 50-foot setbacks from lot lines.
  • A limit of 50% of the parent parcel’s calculated lot area, with a maximum of 20 acres of solar panels, and at least 1,000 feet between large-scale systems.
  • A 50-foot vegetative buffer, subject to the law’s provisions, and non-reflective or earth-tone support systems.
  • Limits on mature-tree clearing, a grading and vegetation plan, and underground grid connections unless the Planning Board grants a waiver for good cause.
  • Stormwater compliance, fencing, signage, lighting controls and an operations and maintenance plan.

The Board must also assess whether a proposed site avoids productive farmland, steep slopes, ridgelines, sensitive viewsheds, wetlands and permanently protected open space. Agricultural soils and current land use are part of that review.

Safety, registration and end-of-life planning

All systems must be maintained in good working order and designed to limit reflective glare. Battery storage must be housed in a secure enclosure meeting applicable fire and building code requirements, and batteries must be disposed of according to applicable rules when no longer used. Emergency responders must receive relevant system information before a Certificate of Compliance is issued, and weather-resistant signage must explain how to isolate solar electric equipment.

Large-scale projects require a decommissioning plan covering removal of infrastructure, soil and vegetation restoration, waste disposal, a timeline and an engineer- or contractor-prepared cost estimate. The plan must include performance security acceptable to the Town for the life of the project. Large-scale facilities also face Town registration and recurring certification requirements. A facility that ceases normal operation for one year is considered to have ceased operating under the law; abandonment procedures may lead to removal, with costs recoverable by the Town.

Practical implications for project teams

Shawangunk’s framework makes project classification an early planning decision: onsite use, generation level, zoning district and site conditions all affect the approval path. Smaller projects still need permits, code-compliant plans and safety documentation, while large-scale proposals require broader land-use, environmental, visual and operational review. Integrators, owners and developers should account for those obligations from site screening through interconnection and eventual decommissioning, and confirm specific requirements with the Town before proceeding.

Access Official Technical PDF

About The Author