Access Official Technical PDF

Share Summary:LinkedInEmail

Optical networks using wavelength division multiplexing (WDM) need light sources that can operate across a broad range of wavelengths. As 100 Gb/s digital coherent communication advanced, the requirements became more demanding: transmitters needed both narrow linewidth and substantial optical output, alongside the ability to select wavelengths across the 1.55 μm band. The development of a full-band wavelength tunable laser using a chirped-sampled-grating distributed reflector (CSG-DR) structure brought these requirements together in a monolithically integrated device.

Why tunable lasers mattered for coherent communication

WDM systems, which carry multiple optical channels at different wavelengths, had been spreading rapidly since the mid-1990s. A laser able to tune across approximately 40 nm in the 1.55 μm band could serve a wide wavelength range from one device. Later, the move toward multilevel phase-shift-keying modulation and 100 Gb/s coherent links increased the importance of low phase noise and high light output.

Full-band tunable lasers generally fall into two broad design groups: monolithic integrated devices and external-resonator designs. Monolithic devices incorporate laser functions on a chip. They can be compact and suitable for integration with other elements, while external-resonator structures have an advantage in achieving narrow linewidth. Within the monolithic category, common approaches include distributed feedback (DFB) arrays, distributed Bragg reflector (DBR) lasers and distributed reflector (DR) lasers.

How the CSG-DR laser selects a wavelength

Reported in 2007, the CSG-DR design combines an active sampled-grating DFB (SG-DFB) section with a passive chirped-sampled-grating DBR (CSG-DBR) section. A semiconductor optical amplifier (SOA) is integrated at the output. The device therefore brings the gain-producing laser region, wavelength-selective reflector and output amplification together on a single structure.

Two grating spectra work together

In the SG-DFB region, diffraction gratings are arranged at regular intervals. Their interaction produces a periodic gain spectrum. The CSG-DBR region also uses an array of gratings, but their spacing changes slightly along the structure. This chirp creates a periodic reflection spectrum with a broader, gently shaped envelope.

Heaters integrated into the CSG-DBR region adjust the reflection spectrum through the thermo-optic effect. The average power applied to three heaters shifts the individual reflection peaks. The relative power, or temperature gradient, across those heaters changes the position of the broader envelope. These controls allow the laser to select a reflection peak near the desired wavelength.

The vernier effect and stable mode selection

The laser uses the vernier effect: the gain-spectrum peaks and reflection-spectrum peaks have slightly different spacing. Where peaks from the two spectra align, they reinforce selection of an oscillation mode. Adjusting the heaters changes which alignment is favored, allowing the operating wavelength to be selected.

Peak alignment alone can leave multiple possible modes, separated by the difference between the two spectral periods. To support stable single-mode operation, the device also adjusts the broad reflection envelope so that it favors the desired peak. Temperature control across the entire element then shifts the gain and reflection features together, enabling continuous tuning of the selected wavelength.

Integration and performance characteristics

The laser was fabricated on an indium phosphide (InP) substrate using InP and indium gallium arsenide phosphide (InGaAsP) materials. The active layers in the SOA and SG-DFB sections differ in composition from the passive CSG-DBR section. A crystal-growth process known as butt-joint growth connects these regions.

Two design choices were central to the device’s performance. First, heater-based thermo-optic control was used for vernier tuning rather than current-injection plasma-effect control. The stated benefit was reduced spontaneous-emission light noise and a narrower linewidth, corresponding to lower phase noise. Second, the DR arrangement combines DFB and DBR functions and can provide high output without requiring phase adjustment between those sections.

Following improvements to the structure, the 2013 development achieved optical fiber output exceeding +16 dBm while maintaining linewidth below 200 kHz. The source describes the device as a monolithically integrated light source adopted for 100 Gb/s digital coherent communication. It also notes that work on thermal control methods for narrow-linewidth operation gained attention.

Practical significance for optical systems

For engineers evaluating optical transmission components, the CSG-DR example illustrates how wavelength selection, output power and spectral purity can depend on coordinated design rather than a single feature. The gain grating and reflection grating establish the available modes; heater control determines which mode is selected; and overall temperature control supports continuous wavelength movement.

The architecture also demonstrates a trade-off addressed through integration. External resonators can offer narrow linewidth, while monolithic structures offer compactness and integration potential. The CSG-DR approach used a monolithic design with thermal wavelength control to pursue narrow linewidth alongside high output, supporting its role in coherent transmission.

Conclusion

The full-band CSG-DR laser was developed to meet the changing demands of high-capacity optical communications. Its combination of sampled-grating gain and reflection spectra, vernier-based wavelength selection, integrated heaters and an SOA enabled broad tuning with narrow linewidth and high optical output. For technical decision-makers, the key lesson is that precise thermal control and coordinated optical structures are central to achieving stable, tunable performance in a monolithically integrated coherent light source.

Access Official Technical PDF

About The Author